Instruction Manual

54 DNX7240BT/DDX6054
Audio Control
[Bass Boost] Sets the amount of bass boost.
(DNX7240BT only)
"OFF"/ "Step1"/ "Step2"
[Stream Information] Displays the present
source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.
Equalizer Control
You can set up the equalizer.
Display the Equalizer screen1
Touch [
] > [ ] > [Equalizer]. (page 53)
Set each item2
DNX7240BT
DDX6054
[SystemQ] Selects an equalizer curve type.
You can select any of the following equalizer
curves.
"Natural"/ "Rock"/ "Pops"/ "Easy"/ "Top40"/
"Jazz"/ "Game"*/ "iPod"*/ "User"
⁄
* DNX7240BT only. •
"User" can be selected after graphic equalizer •
adjustment is carried out. See <Graphic Equalizer
Setup> (page 54).
"User" can be selected after tone adjustment is •
carried out. See <Tone Setup> (page 55).
When "iPod" is selected, the [EQ] button is •
deactivated. "iPod" uses its equalizer function.
[SystemQ-Ex] Selects items to be adjusted for
tone curve setup. (DDX6054 only)
If turned "OFF", only Level can be setup for
tone curves.
[EQ] Displays the Graphic Equalizer setup
screen. (page 54) (DNX7240BT only)
[Tone] Displays the Tone curve setup screen.
(page 55) (DDX6054 only)
Graphic Equalizer Setup (DNX7240BT)
You can Manually set the equalizer curve.
Display the Equalizer screen1
Touch [ ] > [ ] > [Equalizer]. (page 53)
Display the Graphic Equalizer screen2
⁄
When "iPod" is selected in <Equalizer Control>, the •
[EQ] button is deactivated. "iPod" uses its equalizer
function.
Set the Graphic Equalizer3
1
1
1
1 Gain level can be adjusted by touching the
each frequency bar.
[2], [3] Sets a frequency.
[5], [∞] Sets a gain level.
[EQ Init] Returns to the previous level which
the gain level is adjusted.
[Flat] Tone curve becomes flat.
[Bass EXT] Bass Extend settings.
If turned "ON", it extends the 62.5 Hz to the
low register by approximately 20%.
[SW Level] Adjusts the subwoofer volume.
B64-4505-00_01-E_English.indd 54B64-4505-00_01-E_English.indd 54 09.4.20 9:05:46 AM09.4.20 9:05:46 AM