Instruction Manual

72 DNX7240BT/DDX6054
Setup Menu
Speaker Setup
You can select a speaker type and its size to get
the best sound effects.
Display the Speaker Select screen1
Touch [ ] > [ ] > [Audio SETUP] >
[Speaker Select]. (page 58)
Select a speaker you wish to adjust2
When the speaker type and size are set, the
speaker crossover network and equalizer curve
are set automatically.
DNX7240BT
2
2
2
1
1
1
3
3
3
DDX6054
2
2
2
1
1
1
3
3
3
1
Front speaker
2
Rear speaker
3
Subwoofer
[Subwoofer] Sets the availability of
subwoofers. (DDX6054 only)
[Tweeter] You can set the tweeter when you
are selecting front speakers. (DNX7240BT only)
If you are using a tweeter together with the
front speakers, set the tweeter to "ON". In the
"ON" position, the Equalizer is adjusted to its
best position.
[X'over] Displays the Speaker Crossover Setup
screen.
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.
Select a speaker type3
You can select any of the following speaker
types.
DNX7240BT
"Front" OEM, 10 cm, 13 cm, 16 cm, 17 cm, 18
cm, 4x6, 5x7, 6x8, 6x9, 7x10
"Rear" NONE, OEM, 10 cm, 13 cm, 16 cm, 17
cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
"Subwoofer" NONE, 16 cm, 20 cm, 25 cm, 30
cm, 38 cm over
DDX6054
Standard, Narrow, Middle, Wide
⁄
Select "NONE" if you have no speakers.•
Crossover Network Setup
You can set a crossover frequency of speakers.
Select the speaker to set the crossover1
2
2
2
1
1
1
3
3
3
1 Sets the High Pass Filter of the front speaker.
2 Sets the High Pass Filter of the rear speaker.
3 Sets the Low Pass Filter of the sub woofer.
Display the Crossover setup screen2
Set the crossover3
B64-4505-00_01-E_English.indd 72B64-4505-00_01-E_English.indd 72 09.4.20 9:05:53 AM09.4.20 9:05:53 AM