Owner's Manual

1 Displays/hides other available operation keys*
2 Selects the band (SXM1/SXM2/SXM3/SXM4)
3 Channel number
4 Text information
• Touching [
] scrolls the text if not all of the text
is shown.
• Touching [Song Title]/[Info]/[Category]
switches the information.
5 Displays the preset channel window
• To hide the window, touch [
].
6 [P1] – [P5]
• (Touch) Selects a preset channel.
• (Hold) Presets the current channel.
7 Playback status and time code for the buffered data
and replay mode
• The time code shows you the point in the Replay
buffer you are listening to. (E.g. “–5:00” means
that you are listening to audio that is 5 minutes
behind the current broadcast.)
8 Replay time bar for replay mode
• Black: The remaining capacity
• Blue: The amount of buffered contents
9 Signal strength indicator
p Seek mode indicator
q Operation keys*
* See the following “Operation keys on source control screen”.
SiriusXM® Satellite Radio
SiriusXM® Satellite Radio
q
[ ]
Displays the <Channel List> screen.
[
IW]
Starts/pauses the content replay.
[CH
J]/[CHK]
Selects the channel.
• To select a channel, make sure
“SEEK1” is selected as the seek
mode.
• To select a preset channel, make
sure “SEEK2” is selected as the seek
mode.
Selecting a channel on the list
You can obtain information on channels or select a
channel to listen to.
1 Display the <Channel List> screen.
On the source control screen, touch as follows:
2 Select a category (1), and then select a
channel (
2).
All Channels
Category Name 1
Category Name 2
Category Name 3
Category Name 4
100Ch Channel Name
105Ch Channel Name
110Ch Channel Name
115Ch Channel Name
120Ch Channel Name
Channel Channel List
Operation keys on source control screen
• See also “Common operation keys on source control
screen” on page8.
Touching the operation keys performs the following
actions:
1
[MODE] Displays the <SiriusXM Mode>
screen.
[
]
(Hold) Registers the current artist to
the alert contents.
[
]
(Hold) Registers the current song to
the alert contents.
[
]
Activates or deactivates the content
alert for traffic and weather.
[SEEK]
Changes the seek mode for [CH
J]/
[CH
K].
• SEEK1 (Initial): Skips to another
available channel.
• SEEK2: Skips to another preset
channel.
[SCAN] Starts TuneScan™.
[
S]/[T]/
[Live]
Performs playback operations during
content replay.
[
]
Changes the page in the window to
display other operation keys.
19
ENGLISH
00_DDX_2019ST_KN_RN.indb 19 31/5/2018 2:44:23 PM