Owner's Manual

<DivX(R) VOD>
(Only for DDX419BT)
This unit has its own Registration Code. Once you
have played back a file with the Registration Code
recorded, this unit’s Registration Code is overwritten
for copyright protection.
• Touch [Enter] to display the information.
• To return to the previous screen, touch [OK].
<Security Code>
(Only for DDX419BT)
Register the security code for the unit. (Page6)
<Serial Number>
(Only for DDX396/DDX376BT/DDX276BT/DDX26BT)
Displays the serial number.
<Touch Panel Adjust>
Adjust the touch positions of the buttons on the
screen.
Touch the center of the marks at the upper left (1),
the lower center (2), then the upper right (3) as
instructed.
Cancel Reset
Touch Panel Adjust
• To reset the touch position, touch [Reset].
• To cancel the current operation, touch [Cancel].
<Steering Remote Control Setting>
(Only for DDX419BT)
Assign functions to the keys of the remote controller
on the steering wheel.
• This function is available only when your car is
equipped with the electrical steering remote
controller.
• You can only register/change the functions while
you are parked.
• If your steering remote controller is not compatible,
learning may not be completed and an error
message may appear.
• For connection, see page 57 for more information.
1 Touch [Set] for <Steering Remote Control
Setting> to display the setting screen.
2 Press and hold a button on the steering
remote controller to register or change.
3 Select a function to assign to the selected
button.
Steering Remote Control Setting
VOL
Please select the function to assign to the button.
VOL
ATT
SRC
Done
Settings
Settings
4
Repeat steps 2 and 3 to register other
buttons.
5 Touch [Done] to finish the procedure.
• The unit can register/change all of the buttons’
functions at the same time. To do this, press all
buttons in turn and after pressing all of them, touch
[Done] on the <Steering Remote Control Setting>
screen. However, new functions cannot be learned
after this operation.
• When changing the functions already learned, touch
the assigned function you want to change in step 3
and then touch to select the new function from the
function list.
• Confirm the contents of the settable functions in the
function list. You cannot edit the function list.
To initialize the setting: Touch [Initialize] for
<Steering Remote Control Setting>.
• A confirmation message appears. Touch [Yes].
– To cancel the initialization, touch [No].
47
ENGLISH
00_DDX_2019ST_KN_RN.indb 47 31/5/2018 2:44:29 PM