Owner's Manual

Troubleshooting
Troubleshooting
Echo or noise occurs.
o Adjust the microphone unit position.
o Adjust the echo volume or noise reduction volume.
(Page35)
The unit does not respond when you try to copy
the phone book to the unit.
o You may have tried to copy the same entries (as
stored) to the unit.
“Connection Error” appears.
o The device is registered but the connection has
failed. Connect the registered device. (Page34)
“Please Wait...” appears.
o The unit is preparing to use the Bluetooth function.
If the message does not disappear, turn off and
turn on the unit, then connect the device again (or
reset the unit).
“No Voice Device” appears.
o The connected mobile phone does not have a
voice recognition system.
“No Data” appears.
o No phone book data is contained in the connected
Bluetooth phone.
“Initialize Error” appears.
o The unit has failed to initialize the Bluetooth
module. Try the operation again.
“Dial Error” appears.
o Dialing has failed. Try the operation again.
Specifications
Specifications
Monitor section
Picture Size (W × H) 6.2 inches (diagonal) wide
137.5 mm × 77.2 mm
(5-7/16" × 3-1/16")
Display System Transparent TN LCD panel
Drive System TFT active matrix system
Number of Pixels 1 152 000
(800H × 480V × RGB)
Effective Pixels 99.99%
Pixel Arrangement RGB striped arrangement
Back Lighting LED
USB interface section
USB Standard USB 2.0 Full Speed/High
Speed
Compatible Device Mass Storage Class
File System FAT 16/32
Maximum Power
Supply Current
DC 5 V
1.5 A
D/A Converter 24 bit
Audio Decoder MP3/WMA/AAC (.aac/.m4a)/
WAV/FLAC
Video Decoder DivX*/MPEG1/MPEG2/JPEG
* Only for DDX419BT.
“Hung Up Error” appears.
o The call has not ended yet. Park your car, and use
the connected mobile phone to end the call.
“Pick Up Error” appears.
o The unit has failed to receive a call.
The Bluetooth connection between the Bluetooth
device and the unit is unstable.
o Delete the unused registered Bluetooth device
from the unit. (Page 35)
64
ENGLISH
04_DDX_2019ST_KNRN_Body02.indd 64 6/6/2018 9:19:16 AM