Operation Manual

24
APPs APPs
You can use an App of the connected iPod touch/
iPhone/Android on this unit.
• For Apps you can use on this unit, visit
<http://www.kenwood.com/cs/ce/>.
Preparation
1 Connect the iPod touch/iPhone/Android.
• For Android: Connect the Android device via
Bluetooth. (Page38)
• For iPod touch/iPhone: Connect iPod touch/
iPhone with a cable. (Page65)
– Be sure to select the appropriate connection
method of iPod touch/iPhone on <APP
Setup>. (Page46)
– You cannot watch video when connecting a
Lightning connector model.
2 Select the iPod touch/iPhone/Android
device to use on the <APP Setup> screen.
(Page46)
When connecting the device for the first time, the
setup screen (for connection, etc.) appears. Follow
the procedure on the setup screen to configure
the settings.
Using an App
When the operation buttons are not displayed on
the screen, touch the screen to show them.
• To change settings for video playback, see
page50.
❏ Playback operations
1 Start the App on your iPod touch/iPhone/
Android.
2 Select “APPs” as the source. (Page10)
❏ Operation buttons on the source
control screen
[ ]
Displays the other operation button
window.
• To hide the window, press [
].
[
]
Displays the <Equalizer> screen.
(Page47)
[S] [T]*
Selects an audio/video file.
[O] [N]*
Reverse/forward search.
[IW]*
Starts/pauses playback.
[I]*
Starts playback.
[W]*
Pauses playback.
[
]
Switches the device on the <APP
Setup> screen. (Page46)
• You can operate some functions of the App on the
touch panel.
• You can control playback of the following:
– Audio playback via iPod touch/iPhone/Android
devices
– Video playback via iPod touch/iPhone
* Applicable for iPod touch/iPhone only.
2017DDX-Entry_E.indb 242017DDX-Entry_E.indb 24 2016/10/31 14:332016/10/31 14:33