Operation Manual

4
INITIAL SETTINGSINITIAL SETTINGS
Initial setup
When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
• You can also change the settings on the <Setup>
screen. (Page55)
1 Perform the initial settings.
<Demonstration>
(Page57)
Activate or deactivate the
display demonstration.
<Language>
(Page58)
Select the text language
used for on-screen
information.
• Set <GUI Language>
to display the operation
buttons and menu items
in the selected language
([Local]) or English
([English]).
<Rear Camera>
(Page34)
Configure the settings to
display the picture from
the connected rear view
camera.
<User
Customize>
(Page51)
Change the display design.
<Viewing Angle>
(Page57)
Select the viewing angle
in relation to the monitor
panel to make the panel
easier to see.
2 Finish the procedure.
The Home screen is displayed.
Setting the security function
❏ Registering a security code
You can set a security code to protect your receiver
system against theft.
1 Display the Home screen.
On the monitor panel:
2 Display the <System> setting screen.
3 Display the <Security Code Set> screen.
• You can change the page to display more
items by pressing [ ]/[ ].
4 Enter a four-digit number (1), then
confirm the entry (2).
• Press [Clear] to delete the last entry.
• Press [Cancel] to cancel the setting.
• Press [ ] to return to the current source
control screen.
5 Repeat step 4 to confirm your security
code.
Now, your security code is registered.
2017DDX-Entry_E.indb 42017DDX-Entry_E.indb 4 2016/10/31 14:332016/10/31 14:33