Owner's Manual

ENGLISH 39
OTHER EXTERNAL COMPONENTS
OTHER EXTERNAL COMPONENTS
Using external audio/video
players—AV-IN
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 52.
R Starting playback
Preparation:
“AV-IN” cannot be selected when <iPod Setup>
is set to [USB+AV-IN]. Be sure to select [USB 1
Wire] for <iPod Setup> beforehand. (Page20)
1 Connect an external component to the
iPod/AV-IN input terminal. (Page66)
2 Select “AV-IN” as the source. (Page9)
3 Turn on the connected component and
start playing the source.
R Changing the AV-IN name
You can change the AV-IN name displayed on the
“AV-IN” source control screen.
1 Display the <VIDEO Mode> screen.
2 Select an AV-IN name.
• This setting does not affect the source name
displayed on the Home screen.
Using an external component via
ADS adapter—OEM Features
(Only for
DDX374BT)
You can control the sources from the component via
ADS adapter.
Preparation:
Configure the settings on the <Parking Assist>
(Page58)/<OEM Setup> (Page59) screens
beforehand.
1 Connect the ADS adapter to the iDatalink
input terminal. (Page66)
2 Select “OEM Features” as the source.
(Page9)
3 Turn on the connected component and
start playing the source.
2017DDX-EntryK.indb39 2016/06/0310:07