Owner's Manual

74
R USB
“Reading” does not disappear from the screen.
Turn the power off and on again.
While playing a track, sound is sometimes
interrupted.
The tracks are not properly copied into the USB
device. Copy the tracks again, and try again.
Tracks are not played back as you have intended
them to play.
Playback order may differ from the one played
back using other players.
R Android
Sound cannot be heard during playback.
Reconnect the Android device.
• When <Android Setup> is set to [HAND MODE],
launch any media player application on the
Android device and start playback.
Sound output only from the Android device.
• When <Android Setup> is set to [HAND MODE],
relaunch the current media player application or
use another media player application.
Restart the Android device.
If this does not solve the problem, the connected
Android device is unable to route the audio signal
to unit.
Cannot playback when <Android Setup> is set to
[BROWSE MODE].
Make sure KENWOOD Music Play APP is installed
on the Android device.
Reconnect the Android device and select the
appropriate control mode.
If this does not solve the problem, the connected
Android device does not support the Browse
Mode.
“NO DEVICE” or “READING” keeps flashing.
Switch off the developer options on the Android
device.
Reconnect the Android device.
If this does not solve the problem, the connected
Android device does not support the Browse
Mode.
R iPod/iPhone
No sound comes out of the speakers.
Disconnect the iPod/iPhone, then connect it again.
Select another source, then reselect “iPod”.
The iPod/iPhone does not turn on or does not
work.
Check the connecting cable and its connection.
Update the firmware version.
Charge the battery.
Reset the iPod/iPhone.
Sound is distorted.
Deactivate the equalizer either on this unit or the
iPod/iPhone.
A lot of noise is generated.
Turn off (uncheck) “VoiceOver” on the iPod/
iPhone. For details, visit <http://www.apple.com>.
No operations are available when playing back a
track containing artwork.
Operate the unit after the artwork has loaded.
Videos cannot be played.
Connect with USB Audio and Video cable
KCA-iP202 (optional accessory) to iPod/iPhone
30-pin connector model. Other cables cannot be
used.
• Select [USB+AV-IN] for <iPod Setup>.
(Page20)
No sound of videos comes out.
Connect with USB Audio and Video cable
KCA-iP202 (optional accessory) to iPod/iPhone
30-pin connector model. Other cables cannot be
used.
• Select [USB+AV-IN] for <iPod Setup>.
(Page20)
R Radio
AME automatic presetting does not work.
Store stations manually. (Page29)
Static noise while listening to the radio.
Connect the antenna firmly.
R AV-IN
“AV-IN” cannot be selected on the Home screen.
• Select [USB 1 Wire] for <iPod Setup>.
(Page20)
No picture appears on the screen.
Turn on the video component if it is not on.
REFERENCES
REFERENCES
2017DDX-EntryK.indb74 2016/06/0310:07