MONITOR WITH DVD RECEIVER ENGLISH INSTRUCTION MANUAL DDX396 DDX376BT DDX276BT (Region 1 – DVD Region Code 1 Area) (Region 1 – DVD Region Code 1 Area) DDX26BT DDX419BT (Region 1 – DVD Region Code 1 Area) (Region 4 – DVD Region Code 4 Area) (Region 1 – DVD Region Code 1 Area) This instruction manual is used to describe the models listed above. Model availability and features (functions) may differ depending on the country and sales area. Take the time to read through this instruction manual.
Important Notice To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGS and CAUTIONS in this manual. Please keep the manual in a safe and accessible place for future reference. WARNINGS To prevent accidents and damages • DO NOT install any unit or wire any cable in a location where; – it may obstruct the steering wheel and gearshift lever operations. – it may obstruct the operation of safety devices such as air bags.
Important Notice For DDX396/DDX376BT/DDX276BT/DDX26BT: CAUTION This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE).
About this manual The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels. Illustrations of DDX396 are mainly used for explanation. Contents Component Names and Operations ............... 3 Basic Operations ................................................. 4 Using an external component via ADS adapter— OEM Features ...............................................................
Component Names and Operations DDX396/DDX376BT 8 Volume/ATT knob • Volume (Turn): Adjusts the audio volume. • ATT (Press): Attenuates the sound. 9 CAM button • (Press): Displays the picture from the connected rear view camera. DDX276BT/DDX26BT/DDX419BT 1 Reset button • Resets the unit. 2 Loading slot 3 Screen (touch panel) 4 Monitor panel HOME button 5 • (Press): Turns on the power. • (Hold): Turns off the power. • HOME (Press): Displays the Home screen while the power is on.
Basic Operations How to reset your unit 2 On the source/option selection screen, touch as follows: If the unit fails to operate properly, press the reset button. Turning on the power Put the unit in standby. Turning off the screen On the monitor panel Adjusting the volume DDX396/DDX376BT You can adjust the volume (00 to 35) by turning the knob to the right to increase and to the left to decrease.
Basic Operations Getting Started Attenuating the sound Initial settings DDX396/DDX376BT DDX276BT/DDX26BT/ DDX419BT When you power on the unit for the first time or reset the unit, the screen appears. Perform the initial settings. (Hold) Initial Setup Demonstration The ATT indicator lights up. To cancel attenuation: For DDX396/DDX376BT: Press the same button again. For DDX276BT/DDX26BT/DDX419BT: Press and hold the same button again.
Getting Started Registering a security code (Only for DDX419BT) 1 Display the Home screen. To clear the registered security code: Touch [CLR] for in step 2. Then, enter the current security code to clear and touch [Enter]. • When the unit has been reset or disconnected from the battery, you are required to enter the security code. Enter the correct security code, then touch [Enter]. 2 Set the clock time.
Various Screens and Operations You can display or change to other screens at any time to show information, change the AV source, change the settings, etc. Available playback sources and options Touch 1 to display the source/option selection screen. [Pandora]*1 Switches to the Pandora broadcast. [Spotify] Switches to the Spotify application. [iHeartRadio]*1 Switches to the iHeartRadio broadcast. [STANDBY] Puts the unit in standby. Home screen • You can customize the Home screen.
Various Screens and Operations Source control screen You can perform the playback operation from the source control screen during playback. • The operation keys and information displayed vary depending on the selected source/disc type/file type being played. • If the operation keys are not displayed on the screen, touch the screen to show them.
Various Screens and Operations Using the pop-up short-cut menu While displaying the source control screen, you can jump to another screen by touching the operation keys on the pop-up short-cut menu. 1 Display the pop-up short-cut menu. 2 Select an item to jump to by touching as follows. [Eject] Ejects the disc from loading slot. [Screen Adjustment] Displays the picture adjustment screen. [Display OFF] Turns off the screen. [Camera] Displays the picture from the connected rear view camera.
Disc • If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. • For playable disc types, file types and other information, see pages 57 and 58. • If “ ” appears on the screen, the unit cannot accept the operation you have tried to do. – In some cases, without showing “ ”, operations will not be accepted. • When playing back a multi-channel encoded disc, the multi-channel signals are downmixed.
Video Disc 2 Make the settings. DISC Mode Menu Language English SET Subtitle Language English SET Audio Language English SET Dynamic Range Control Down Mix Dialog Dolby Surround Screen Ratio Stereo 16:9
*1 Select the initial disc menu language. (Initial: English) *1 Select the initial subtitle language or turn subtitles off (Off). (Initial: English) *1 Select the initial audio language. Video Video menu control operations You can display the video menu control during video playback. • Available operation keys differ depend on the selected disc type and file type. Touching the operation keys performs the following actions: Displays the picture adjustment screen. 1 Touch [DIM ON] or [DIM OFF] to turn on or off the dimmer. 2 Touch [+]/[–] to adjust the other items. • : Adjusts the brightness (−15 to +15). • : Adjusts the contrast (−10 to +10).
USB Video 2 [ MENU] [T MENU] Displays the disc menu (DVD). Displays the disc menu (DVD). [Highlight] Switches to the direct disc menu mode. Touch the target item to select. [CUR] Displays the menu/scene selection screen. • [J] [K] [H] [I]: Selects an item. • [Enter]: Confirms the selection. • [Return]: Returns to the previous screen. Video playback for VCD Touching the operation keys performs the following actions: 1 [ZOOM] [Aspect] [Picture Adjust] Refer to “Video playback except VCD” on page 12.
USB Playback operations Playback information and key operation • For playback information, see “Source control screen” on page 8. • For key operations on the touch panel, see “Common operation keys on source control screen” on page 8. Selecting a folder/track on the list 1 2 Enter the alphabet to search. Touch the first letter you want to search for, then touch [OK]. Display the folder/track list.
Android Connecting an Android device This unit supports Android OS 4.1 and above. Android (commercially available) iPod/iPhone Playback operations Connecting an iPod/iPhone Playback information and key operation Android HANDMODE • For playable iPod/iPhone types and other information, see page 60. • You cannot watch video. Wired connection S IW T USB cable (commercially available) iPod/iPhone iPod/iPhone 30-pin Lightning model connector model (commercially available) (commercially available) E.g.
Radio iPod/iPhone Bluetooth connection Pair the iPod/iPhone with this unit via Bluetooth. (Page 33) 2 Select a category (1), then select a desired item (2). The unit switches to FM alarm scene automatically when receiving an alarm signal from FM broadcast. iPod Selecting the playback device via the connection method See on page 46 for more information.
Radio 6 Displays/hides other available operation keys* 7 TI indicator 8 ST/MONO indicator The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength. 9 Seek mode indicator p Operation keys* • If the TI indicator lights up in orange, tune into another station providing Radio Broadcast Data System signals. • The volume adjustment for Traffic Information is automatically memorized.
SiriusXM® Satellite Radio Radio Selecting a preset station 1 Select the band, then display the preset station window. On the source control screen, touch as follows: Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Connect Vehicle Tuner and subscription are required. For more information, visit
SiriusXM® Satellite Radio 1 2 3 4 5 6 7 8 9 p q Displays/hides other available operation keys* Selects the band (SXM1/SXM2/SXM3/SXM4) Channel number Text information • Touching [ ] scrolls the text if not all of the text is shown. • Touching [Song Title]/[Info]/[Category] switches the information. Displays the preset channel window • To hide the window, touch [ ]. [P1] – [P5] • (Touch) Selects a preset channel. • (Hold) Presets the current channel.
SiriusXM® Satellite Radio • To list all the channels, touch [All Channels]. • Touch the info change key above the list ([Channel]/[Artist]/[Song Title]/[Info]) to display other information in the following order: Channel, Artist, Song Title, Content Info. Selecting a preset channel 1 Replaying content Select the band, then display the preset channel window. On the source control screen, touch as follows: Presetting channels in the memory You can preset five channels for each band.
SiriusXM® Satellite Radio [IW] Starts/pauses playback. [S]/[T] Skips the current track/segment. • Touching [S] within 2 seconds of the beginning of the current track/segment returns to the previous track. • Touching [S] after 2 seconds or more of the current track returns to the beginning of the track. When you select a SmartFavorites channel, you can listen to the current song from the beginning. (Hold) Reverses/forwards search. 2 [Live] Returns to the live position.
SiriusXM® Satellite Radio For teams 1 Selecting items for Content Alert Display the screen. On the source control screen, touch as follows: You can select items (artists/songs/teams) from the registered items on the list to inform you once the unit receives the information. For artists/songs/teams Then, on the screen, touch as follows: : [Enter] 2 1 Display the screen.
SiriusXM® Satellite Radio Activating Content Alert Switching to registered content For artists/songs/teams 1 Display the screen. On the source control screen, touch as follows: When an artist/song/team registered for Content Alert is being broadcasted, an alert appears on the screen. Artist 1/ Channel Name Artist 2/ Channel Name Activate Content Alert.
SiriusXM® Satellite Radio 3 Enter a new four-digit code, then touch [Enter] to confirm. 4 Repeat step 3 above to confirm the new code. Activating parental control Parental Lock channel selection This option allows you to manually select the channels to be locked by the parental control feature. • You can only change the setting if is set to [User].
SiriusXM® Satellite Radio Resetting the SiriusXM Satellite Radio settings You can reset all the SiriusXM settings you made and restore the initial settings. 1 Display the screen. On the source control screen, touch as follows: 2 Reset the setting. On the screen, touch and hold as follows: : [Reset ] Pandora® (Only for DDX396/DDX376BT/DDX276BT/DDX26BT) You can stream Pandora from iPhone/iPod touch or Android devices.
Pandora® Playback operations Playback information and key operation Pandora Operation keys on source control screen • The appearance of the operation keys may differ, however the similar operation keys have the same operations. • See also “Common operation keys on source control screen” on page 8. Touching the operation keys performs the following actions: 1 Selecting a station from the list 1 Display the list selection screen. On the source control screen, touch as follows: 2 Select the list type.
iHeartRadio Pandora® 3 Select a station from the list. On the station list: Pandora Shuffle (Only for DDX396/DDX376BT/DDX276BT/DDX26BT) iHeartRadio is a free, all-in-one digital radio service that lets you listen to your favorite live stations or create commercial-free, all-music custom stations featuring songs from the artists you select and similar music.
iHeartRadio Playback operations Playback information and keys operation iHeartRadio Operation keys on source control screen • The appearance of the operation keys may differ, however the similar operation keys have the same operations. • See also “Common operation keys on source control screen” on page 8. *1 Appears only for the custom station screen. *2 Appears only for the live station screen.
Spotify iHeartRadio Editing the list Searching for a station 1 Display the screen. 1 2 Display the screen. On the source control screen, touch as follows: On the source control screen, touch as follows: Then, on the screen, touch as follows: Select a station. • The items displayed on the screen differ depending on the information sent from iHeartRadio.
Spotify Install the latest version of the Spotify application on your smartphone. • For Android devices: Search for “Spotify” in Google Play to find and install the most recent version. • For iPhone/iPod touch: Search for “Spotify” in the Apple iTunes App Store to find and install the most recent version.
Spotify *3 Not available for tracks in a playlist. *4 Not available for tracks in the Radio. *5 Available only for premium account users. Selecting a track 1 Display the Spotify menu screen. On the source control screen, touch as follows: Other External Components AV-IN Creating your station (Start Radio) Connecting an external component Start Radio is to start a radio channel based on the currently played track. Create your station.
Other External Components Rear view camera Install the rear view camera (separately purchased) in the appropriate position according to the instructions supplied with the rear view camera. Operations while the camera screen is displayed To adjust the picture Touch the area shown below. Connecting a rear view camera See page 57 for more information. • To use the rear view camera, a reverse lead (REVERSE) connection is required.
Other External Components [Satellite Radio] Displays the control screen of the satellite radio source provided for the vehicle. [Media Player] Displays the control screen of the media player source provided for the vehicle. [TEL] Displays the control screen of the Bluetooth Hands Free function provided for the vehicle. [BT Streaming] Displays the control screen of the Bluetooth streaming function provided for the vehicle.
Bluetooth® Auto pairing When is set to [ON] (page 39), iOS (such as iPhone) devices are automatically paired when connected via USB. Pairing a Bluetooth device using a PIN code (for Bluetooth 2.0) 1 Search for the unit (“DDX3eX”/“DDX3”/ “DDX2”/“DDX4”) from your Bluetooth device. 2 Confirm the request both on the device and the unit. Display the screen. On the Home screen, touch as follows: Pairing a Bluetooth device using SSP (for Bluetooth 2.
Bluetooth® 2 Select the device (1) you want to connect, then select [Connection] (2). Paired Device List Device Name 1 Device Name 2 3 Device Name 3 OK Device Name 4 Connection Device Name 5 Remove Select the device (1) to connect, then return to the (2). BT Connection Settings • The status is shown as follows: : Connection is in progress. : A connection has been established. : A connection can be established.
Bluetooth® 3 Making a call 1 Display the phone control screen. On the Home screen, touch as follows: 2 Select a method to make a call. 1 Device Name 1 2 Device Name 2 X 1234XXXXXX 1 2 3 4 5 6 7 8 9 * 0/+ # 1 From the call history* (missed calls/received calls/dialed calls) 2 From the phone book* 3 From the preset list (Page 37) 4 Use direct number entry 5 Use voice dialling * Applicable only for mobile phone compatible with PBAP (Phone Book Access Profile).
Bluetooth® Switching between two connected devices You can change the device to use when 2 devices are connected. 1 Display the phone control screen. On the Home screen, touch as follows: On the phone control screen: 1 Device Name 1 Bluetooth audio player Presetting phone numbers You can preset up to five phone numbers. 2 Device Name 2 X 1234XXXXXX 1 2 3 4 5 6 7 8 9 * 0/+ # 2 When “BT Audio” is selected as the source, you can connect up to five Bluetooth audio devices at the same time.
Bluetooth® 1 Tag data* (current track title/artist name/album title) • Pressing [<] scrolls the text if not all of the text is shown. 2 Signal strength and battery level (Appear only when the information is acquired from the device.) 3 Playing time*/playback status* 4 Connected device name • Touching the device name switches to another connected Bluetooth audio device. * Available only for devices compatible with AVRCP 1.3. Selecting an audio file from the menu 1 Display the audio menu.
Bluetooth® Settings • ON (Initial): Automatically establishes a connection with the last connected Bluetooth device when the unit is turned on. • OFF: Cancels. Display the screen. Select the speakers used for Bluetooth mobile phones and Bluetooth audio players. • Front Only: Front speakers only. • All (Initial): All speakers. Then, on the screen, touch [Audio].
Settings Store your own sound adjustments 1 2 Select a preset sound mode. Select a band (1) and adjust the level (2), then adjust the sound (3). Equalizer Preset [dB] +9 +7 +5 +3 0 -3 -5 -7 -9 62.5 100 160 Adjust the sound effect. Adjusts loudness. • OFF (Initial)/Low/High SRC Name Q factor Natural Bass EXT 250 400 630 ON SW LEVEL 1k 1.6k OFF 0 2.5k 4k 6.3k 1.5 10k 16k [Hz] Selects the bass boost level.
Settings Crossover network mode settings 4 (Only for DDX396/DDX419BT) Before making any settings for the speakers and crossover frequency, select the appropriate crossover network mode according to the speaker system (2-way speaker system or 3-way speaker system). • Connecting 3-way speakers with 2-way crossover network mode selected may damage the speakers. 1 Select this when connecting speakers in a 2-way system (front/rear).
Settings 3 Adjust the crossover frequency of the selected speaker. • Adjustable items vary depending on the selected speaker type/speaker size/crossover settings. / Adjusts the output volume of the tweeter (left/ right). Adjusts the crossover frequency for the tweeter. Make fine adjustments to the delay time of the speaker output to create a more suitable environment for your car.
Settings Adjust and store the auto-adjustment volume level for each source. If the source is a disc, the adjustment is stored for each of the following categories: • DVD/VCD • CD • DivX*/MPEG1/MPEG2/MP3/WMA/WAV/AAC/FLAC • Auto (Initial): Dims the screen and button illumination when you turn on the headlights. – The ILLUMI lead connection is required. (Page 56) • ON: Activates dimmer. • OFF: Deactivates dimmer.
Settings 3 Adjust the image (1), then capture the image (2). • ON (Initial): Activates the display demonstration. • OFF: Deactivates the display demonstration. Adjust the brightness and blackness of the screen. Select [DIM ON] (dimmer on) or [DIM OFF] (dimmer off), then change the following settings: Capture Cancel E.g. Image adjustment screen for DDX396 Touching [<] scrolls the text regardless of this setting. [J][K][H][I] Moves the zooming frame.
Settings Input settings Display the screen. On the Home screen, touch as follows: Adjust the parking guidelines according to the size of the car, parking space and so on. When adjusting the parking guidelines, make sure to use the parking brake to prevent the car from moving. Select the mark (1), then adjust the position of the selected mark (2). Then, on the screen, touch [Input].
Settings If [Android/Other] is selected in step 1: Smartphone Setup Specify the connection method of Android/iPod/ iPhone. 1 (Only for DDX396/DDX376BT/DDX276BT) Bluetooth Get information, and change the settings for using the ADS adapter. Select the device type (1), then touch [Change] (2). Next Smartphone Setup iPod / iPhone Connection Type Bluetooth Device Name Device Name The screen appears. Go to step 3.
Settings (Only for DDX419BT) This unit has its own Registration Code. Once you have played back a file with the Registration Code recorded, this unit’s Registration Code is overwritten for copyright protection. • Touch [Enter] to display the information. • To return to the previous screen, touch [OK]. • To reset the touch position, touch [Reset]. • To cancel the current operation, touch [Cancel]. 4 Repeat steps 2 and 3 to register other buttons.
Settings Update the system by connecting a USB device containing an update file. • To obtain the update file, visit . Connect a USB device with the update file to the unit. Remote Controller • For DDX419BT: This unit can be operated using the remote controller (RC-DV340) supplied with this unit. • For DDX396/DDX376BT/DDX276BT/DDX26BT: Optional remote controller KNA-RCDV331 is designed for controlling this unit.
Remote Controller Preparation Battery installation Use two “AAA”/“R03”-size batteries. Insert the batteries with the + and – poles aligned properly, following the illustration inside the case. • Always insert batteries from – poles to avoid bending the springs. • If the Remote Controller operates only over shorter distances or does not operate at all, it is possible that the batteries are depleted. In such instances, replace both batteries with new ones.
Remote Controller DVD/VCD (DVD mode) J/K/H/I Moves the cursor when displaying a menu. S/T Selects a track. I/W Starts/pauses playback. o Stops and memorizes the point where the disc stops. 0–9 • Specifies the number to search for in direct search. • 1/2: Fast forwards/backwards. – Fast forward/backward speed changes each time you press this key. • 4/5: Slow forwards/backwards during pause. Deletes a character while in direct search mode. iPod/Android (AUD mode) S/T Selects music/videos.
Remote Controller Basic operations for KNA-RCDV331 (optionally purchased) MAP DIR/OPEN Not used for this unit. NAV/DISP Not used for this unit. ZOOM OUT/IN Not used for this unit. 2 ZONE Not used for this unit. R.VOL Not used for this unit. * Available only when the AUD mode is selected. DVD/VCD (DVD mode) Common operations (AUD/DVD mode) SRC* • Selects the source. • Hangs up the incoming/current call. VOL J/K Adjusts the volume level. ATT Attenuates/restores the sound.
Remote Controller Music Disc/Audio file/Video file/Picture file (AUD mode) J/FM+ / K/AM− Selects a folder. iPod/Android (AUD mode) H/S / T/I Selects music/videos. POSITION/IW Starts/pauses playback. H/S / T/I Selects a track/file. POSITION/IW Starts/pauses playback. 0–9 Specifies the number to search for in direct search. J/FM+ / K/AM− Selects a folder. # BS/DIRECT Enters direct search mode. H/S / T/I Selects a file. POSITION/IW Starts/pauses playback.
Remote Controller KENWOOD Remote APP KENWOOD Remote is an application that connects and controls compatible KENWOOD car receivers via Bluetooth® like a wireless remote control. You can also operate this unit from a Smartphone using KENWOOD Remote APP. This application can display the source information of this unit on the smartphone’s screen, and enables the user to make an audio setting using the graphic user interface of this application.
Installation and Connection • If your car’s ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, such as with battery wires, the battery may be drained. • If the fuse blows, first make sure the wires are not touching to cause a short circuit, then replace the old fuse with one with the same rating.
Installation and Connection Installing the unit (Only for DDX396/DDX419BT) Installing the unit using the mounting bracket removed from the car The frame can be removed from the top side in the same manner. Car bracket Note: Select the appropriate screws (supplied) for the mounting bracket. Installing the unit using the mounting sleeve (Only for DDX396) Remove from the upper two catches of the trim plate (]).
Installation and Connection Wiring connection 10 A fuse *1 Only for DDX396/DDX376BT/DDX276BT/ DDX26BT. *2 Only for DDX396/DDX376BT/DDX276BT. *3 Only for DDX419BT. *4 Only for DDX396/DDX419BT: For 3-way speaker system connection, see also page 57.
References Installation and Connection Connecting external components 7 Rear view camera input (R-CAM) 8 Output terminals*5 • Left output (White) • Right output (Red) REAR: Rear speaker preouts FRONT: Front speaker preouts SW: Subwoofer preouts For 3-way crossover*6: REAR: Tweeter preouts FRONT: Mid-range speaker preouts SW: Woofer preouts 1 Expansion port for connecting SiriusXM Connect Vehicle Tuner (EXT I/F) (commercially available)*1 2 iDatalink input for connecting an ADS adapter (commercially avail
References • This unit can play back files that meet the conditions below: – Bit rate: MP3: 8 kbps – 320 kbps WMA: For disc: 5 kbps – 320 kbps For USB : 32 kbps – 192 kbps AAC: 16 kbps – 320 kbps – Sampling frequency: MP3: 16 kHz – 48 kHz WMA: 8 kHz – 48 kHz WAV: 44.1 kHz AAC: 32 kHz – 48 kHz FLAC: 8 kHz – 96 kHz – Files recorded in VBR (variable bit rate), and have a discrepancy in elapsed time indication • This unit can show or display the following: – Tag: MP3: ID3 Tag (version 1.0/1.1/2.2/2.3/2.
References – This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder) in a recordable/rewritable disc. – Use only “finalized” recordable/rewritable discs. – This unit can play back multi-session recordable/ rewritable discs; however, unclosed sessions will be skipped while playing. Unplayable disc types and formats • DVD-Audio/DVD-ROM discs • SVCD (Super Video CD), CD-ROM, CD-I (CD-I Ready), DTS-CD • MPEG4/DivX*/AAC (.
References About USB playback Important Make sure all important data has been backed up to avoid losing the data. We bear no responsibility for any loss of data stored in the devices while using this unit. Playable files on a USB device • This unit can play the following types of files stored in a USB mass storage class device. – JPEG/Divx*/MPEG1/MPEG2/MP3/WMA/WAV/AAC (.aac/.
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. • For operations with external components, refer also to the instructions supplied with the adapters used for connection (as well as the instructions supplied with the external components). “Learning Process Failed” appears.*2 Your steering remote controller is not compatible, learning may not be completed. Consult your car audio dealer for details.
Troubleshooting Android Sound cannot be heard during playback. Reconnect the Android device. Launch any media player application on the Android device and start playback. Sound output only from the Android device. Use another media player application. Restart the Android device. If this does not solve the problem, the connected Android device is unable to route the audio signal to unit.
Troubleshooting “Limited Connectivity” appears. The connection with the Pandora application cannot be established. “SXM Check Tuner” appears. Make sure the SiriusXM Connect Vehicle Tuner is connected to the unit. “Pandora not available” appears. You cannot use the Pandora application from the area where you are currently trying to access Pandora. “SXM Chan Unavailable” appears.
Specifications Troubleshooting Echo or noise occurs. Adjust the microphone unit position. Adjust the echo volume or noise reduction volume. (Page 35) The unit does not respond when you try to copy the phone book to the unit. You may have tried to copy the same entries (as stored) to the unit. “Connection Error” appears. The device is registered but the connection has failed. Connect the registered device. (Page 34) “Please Wait...” appears. The unit is preparing to use the Bluetooth function.
Specifications DVD player section Bluetooth section D/A Converter 24 bit Technology Bluetooth V3.0 Audio Decoder Linear PCM/Dolby Audio/ MP3/WMA/WAV/AAC (.m4a) Frequency 2.402 GHz to 2.480 GHz RF Output Power (E.I.R.P.) +4 dBm (MAX), Power Class 2 Maximum Communication Range Line of sight approx. 10 m (32.8 ft) Audio Codec SBC/AAC Profile HFP (Hands Free Profile) 1.6 A2DP (Advanced Audio Distribution Profile) 1.3 AVRCP (Audio/Video Remote Control Profile) 1.
Specifications 3 Way X'Over * Tweeter (HPF): Mid Range (HPF): Mid Range (LPF): Subwoofer (LPF): 66 Frequency (Hz): 1k/1.6k/2.5k/4k/5k/6.3k/8k/ 10k/12.5k Slope (dB/Oct.): −6/−12 Phase: Normal/Reverse Gain (dB): –8/–7/–6/–5/–4/–3/–2/–1/0 Frequency (Hz): Through/30/40/50/60/70/ 80/90/100/120/150/180/ 220/250 Slope (dB/Oct.): −6/−12 Frequency (Hz): 1k/1.6k/2.5k/4k/5k/6.3k/8k/ 10k/12.5k/Through Slope (dB/Oct.
Specifications Audio section General Maximum Power (Front & Rear) 50 W × 4 Operating Voltage 12 V DC car battery Full Bandwidth Power (Front & Rear) 22 W × 4 (at less than 1% THD) Installation Dimensions (W × H × D) Preout Level DDX396: 5 V/10 kΩ DDX396: With sleeve: 182 mm × 111 mm × 160 mm (7-3/16" × 4-3/8" × 6-5/16") Without sleeve: 178 mm × 100 mm × 162 mm (7" × 3-15/16" × 6-3/8") DDX376BT/DDX276BT/ DDX26BT/DDX419BT: 178 mm × 100 mm × 162 mm (7" × 3-15/16" × 6-3/8") Weight (Main Unit) DDX39
Specifications Trademarks and licenses • Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories. • “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries. • The “AAC” logo is a trademark of Dolby Laboratories. • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
00_DDX_2019ST_KN_RN.
For updated information (the latest Instruction Manual, system updates, new functions, etc.), please visit the following website: 05_DDX_2019ST_KNRN_REAR.