Owner's Manual

Bluetooth®Bluetooth®
2
Select the device (1) you want to connect,
then select [Connection] (
2).
Device Name 1
Device Name 5
Device Name 4
Device Name 3
Device Name 2
Remove
Connection
OK
Paired Device List
3 Select the device (1) to connect, then
return to the <Paired Device List> (
2).
Device Name
Connect Ready
Connected
ON OFF
ON OFF
BT Connection Settings
Select [ON] (to connect) or [OFF] (to disconnect).
: Mobile phone
: Audio device
4 Connect the selected device.
Device Name 1
Device Name 5
Device Name 4
Device Name 3
Device Name 2
Remove
Connection
OK
Paired Device List
• The status is shown as follows:
<Connecting>: Connection is in progress.
<Connected>: A connection has been established.
<Connect Ready>: A connection can be established.
<Disconnecting>: Disconnection is in progress.
<Disconnected>: No connection is established.
• When a Bluetooth mobile phone is connected, the
signal strength and battery level are displayed when
the information is acquired from the device.
To delete the registered device: Perform step 1,
select the device you want to delete in step 2, then
touch [Remove].
• A confirmation message appears. Touch [Yes].
Bluetooth mobile phone
When a call comes in...
Incoming Call
Name
1234XXXXXX
Device Name 1
1
Device Name 2
2
Touching the operation keys performs the following
actions:
[ ]
Answers a call.
[
]
Rejects a call.
• Call information is displayed if acquired.
• Phone operation is not available while the picture
from the rear view camera is displayed.
During a call...
Talking...
Name
1234XXXXXX
NR LEVEL
–
+0
EC LEVEL
MIC LEVEL
Device Name 1
1
Device Name 2
2
–
+0
–
+0
DTMF
Touching the operation keys performs the following
actions:
[ ]
Ends a call.
[
]/
[ ]
Switches between handsfree mode and
phone mode.
[DTMF] Enters DTMF (Dual Tone Multi
Frequency), then sends text using the
keypad.
NR LEVEL
[–] / [+]
Adjusts the noise reduction level.
(–5 to 5)
EC LEVEL
[–] / [+]
Adjusts the echo volume level.
(–5 to 5)
MIC LEVEL
[–] / [+]
Adjusts the volume level of the
microphone. (–10 to 10)
Perform the following actions on the monitor panel to
adjust the volume of the call or earpiece.
DDX396/DDX376BT: Turn the volume knob.
DDX276BT/DDX26BT/DDX419BT: Press volume
J/K
button.
35
ENGLISH
00_DDX_2019ST_KN_RN.indb 3500_DDX_2019ST_KN_RN.indb 35 31/5/2018 2:44:27 PM31/5/2018 2:44:27 PM