Owner's Manual

3 Set the clock time.

Clock

Synchronize

AM10 28:

Reset

Radio Data System

E.g. Clock settings screen for DDX396

• Radio Data System (Initial): Synchronizes the

clock time with FM RBDS.

• OFF: Sets the clock manually. Touch [J]/[K] to

adjust the hour, then minute.

– Touching [Reset] will set the minute to “00”.

Getting StartedGetting Started

To clear the registered security code: Touch [CLR]

for <Security Code> in step 2.

Then, enter the current security code to clear and

touch [Enter].

• When the unit has been reset or disconnected from

the battery, you are required to enter the security

code. Enter the correct security code, then touch

[Enter].

Clock settings

1 Display the Home screen.

2 Display the <Clock> screen.

On the Home screen, touch as follows:

Then, on the <Setup> screen, touch as follows:

[System]  <Clock> : [Enter]

• You can also display the <Clock> screen by

touching the clock area on the Home screen.

Registering a security code

(Only for DDX419BT)

1 Display the Home screen.

2 Display the <Security Code Set> screen.

On the Home screen, touch as follows:

Then, on the <Setup> screen, touch as follows:

[System]  <Security Code> : [SET]

3 Enter a four-digit number (1), then

confirm the entry (

2).

• To delete the last entry, touch [Clear].

• To cancel the setting, touch [Cancel].

4 Repeat step 3 to confirm your security

code.

Now, your security code is registered.

ENGLISH

00_DDX_2019ST_KN_RN.indb 600_DDX_2019ST_KN_RN.indb 6 31/5/2018 2:44:21 PM31/5/2018 2:44:21 PM