Owner's Manual

22
TUNER (Only for DDX415BT/DDX392/DDX372BT/DDX320BT/DDX315/DDX272)
Listening to the radio
R Indications and buttons on the source
control screen
12 3
45 6
7
Tuner reception information
1 Band
2 Preset no.
3 The station frequency currently tuned in
4 ST/MONO indicator
• The ST indicator lights up when receiving an
FM stereo broadcast with sufficient signal
strength.
5 Seek mode
6 TI indicator
7 Text information
• Pressing [<] scrolls
the text if not all of the text
is shown.
• Pressing [Radio Text] switches the information
between Radio Text, Radio Text Plus, and PTY
code.
Operation buttons
[P1] – [P6] • Selects a stored station. (Press)
• Stores the current station. (Hold)
[TI]*Activates/deactivates TI standby
reception mode. (Page23)
[AME
]
Presets stations automatically. (See
the right column.)
[MONO]*Activates/deactivates monaural
mode for better FM reception.
(Stereo effect will be lost.)
• The MONO indicator lights up
while monaural mode is activated.
[TEXT] Changes the
display information.
(See the right column.)
[PTY]* Enters PTY search mode. (Page23)
[AM] Selects the AM band.
[FM] Selects the FM band.
[SEEK] Changes the seek mode.
• AUTO1: Auto Search
• AUTO2: Tunes in stations in the
memory one after another.
• MANU: Manual Search
[S] [T]
Searches for a station.
• The search method differs
according to the selected seek
m
ode. (See above.)
[MENU] Displays the <TOP MENU> screen.
* Appears only when FM is selected as the source.
R Changing the display information
The preset list containing the station names for FM
RBDS (when a PS signal is coming in) is displayed.
• Press [TEXT] again to display the text information
for the station currently being received.
Presetting stations
R Storing stations in the memory
You can preset 6 stations for each band.
Automatic presetting — AME (Auto Memory)
(Hold)
Local stations with the strongest signals are found
and stored automatically.