Owner's Manual

34
BLUETOOTH (Only for DDX672BH/DDX492/DDX415BT/DDX392/DDX372BT/DDX320BT )
Information for using Bluetooth®
devices
Bluetooth is a short-range wireless radio
communication technology for mobile devices such
as mobile phones, portable PCs, and other devices.
Bluetooth devices can be connected without cables
and communicate with eac
h other.
Notes
• While driving, do not perform complicated
operations such as dialing numbers, using
the phonebook, etc. When you perform these
operations, stop your car in a safe place.
• Some Bluetooth de
vices may not connect to this
unit depending on the Bluetooth version of the
device.
• This unit may not work for some Bluetooth
devices.
• Connecting conditions may vary depending on
your environment.
• For some Bluetooth devices, the de
vice is
disconnected when the unit is turned off.
Connecting Bluetooth devices
R Registering a new Bluetooth device
When you connect a Bluetooth device to the unit for
the first time, pair the unit and the device. Pairing
allows Bluetooth devices to communicate with each
other.
• The pairing method differs depending on the
Bluetooth version of the device.
–For devices with Bluetooth 2.1: You can pair the
device and the unit using SSP (Secure Simple
Pairing) which only requires confirmation.
–For devices with Bluetooth 2.0: You need to
enter a
PIN code both on the device and unit for
pairing.
• Once the connection is established, it is registered
in the unit even if you reset the unit. Up to 5
devices can be registered in total.
• Only one device f
or Bluetooth phone and one for
Bluetooth audio can be connected at a time.
• To use the Bluetooth function, you need to turn on
the Bluetooth function of the device.
• T
o use the registered device, you need to connect
t
he
device to the unit. (Page36)
Auto pairing
When <Auto Pairing> is set to [ON], iOS device
(such as iPhone) is automatically paired when
connected via USB. (Page50)
Pairing a Bluetooth device using SSP (for
Bluetooth 2.1)
When t
he Bluetooth device is compatible with
Bluetooth 2.1, a pairing request is sent from an
available device.
1 Search the unit (“DDX ****”) from your
Bluetooth device.
2 Confirm the request both on the device
and the unit.
256950
OK
• Press [Cancel] to reject the request.