Owner's Manual
Table Of Contents
- Instruction Manual
- Reset
- Clock Set
- Bluetooth PIN (0000)
- Initial Settings
- Security Function
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Basic Operation
- Disc Playback
- USB Device Operation
- iPod / iPhone Operation
- APPs
- Pandora (Only for DDX672BH/DDX492/DDX392/DDX372BT/DDX272)
- TUNER (Only for DDX392/DDX372BT/DDX272)
- HD Radio tuner (Only for DDX672BH/DDX492)
- SiriusXM Satellite RADIO (Only for DDX672BH/DDX492/DDX392/DDX372BT/DDX272)
- AV Input
- Using a Rear View Camera
- BLUETOOTH (Only for DDX672BH/DDX492/DDX392/DDX372BT)
- Remote Control
- Settings / Menus
- Troubleshooting
- Error Messages
- Specs
- Installation / Connection
46
SETTINGS
5 Capture the image displayed on the
screen.
A confirmation message appears. Press [Yes] to
store the newly captured image. (The existing
image is replaced with the new one.)
• Press [No] to return to the previous screen.
* Not displayed when playing an external component connected to
the Audio Video input or iPod/Audio Video input terminal.
Customizing the <TOP MENU>
screen
You can arrange the items to display on the <TOP
MENU> screen.
1 Display the <Menu Customize> screen.
On the <TOP MENU> screen:
• Press [
] repeatedly to change the page on
the <Display> menu screen.
2 Select where to place the icon (1), then
select the item you want to display in the
selected position (2).
Repeat this step to place icons for other items.
Customizing the system settings
R Memorizing/recalling the settings
• You can memorize the settings changed in the
< Setup> menu and recall the memorized settings
anytime.
• The memorized settings are kept even when the
unit is reset. (Page3)
1 Display the <SETUP Memory> screen.
On the <TOP MENU> screen:
2
• To cancel, press [No].
3 Select an operation.
[Recall] Recalls the memorized settings.
[Memory] Memorizes the current settings.
[Clear] Clears the currently memorized
settings.
• To cancel, press [Cancel].
A confirmation message appears. Press [Yes].
• When you perform reca
ll or clear, the unit
enters standby mode after confirmation.