Owner's Manual
Table Of Contents
- Instruction Manual
- Reset
- Bluetooth PIN (0000)
- Table of Contents
- Compatibility
- Parts & Controls
- Basic Operations
- Getting Started
- Various Screens and Operations
- Disc
- Video
- USB
- Android
- iPod / iPhone
- Radio
- SiriusXM
- Pandora
- iHeartRadio
- Spotify
- External Components
- Bluetooth
- Settings
- Remote Control (Optional)
- Installation and Connection
- Maintenance
- Troubleshooting
- Specs
- Warranty
iPod/iPhone
iPod/iPhone
2
Select a category (1), then select a
desired item (
2).
iPod
Playlists
Artist
Album
Songs
Artist 000000001
Artist 000000002
Artist 000000003
Artist 000000004
Artist 000000005
Podcasts
Select an item in each layer until you reach and
select the desired file.
• Available categories differ depending on the type
of iPod/iPhone.
Settings for iPod/iPhone playback
1 Display the <iPod Mode> screen.
On the source control screen, touch as follows:
2 Make the settings.
Artwork
iPod Mode
ON OFF
<Artwork>
• ON (Initial): Shows the artworks of the playing
files.
• OFF: Hides the artworks of the playing files.
Listening to the radio
Playback information on the source control
screen
Radio
1 Selects the band (AM/FM1/FM2/FM3)
2 Text information
• Touching [<] scrolls the text if not all of the text
is shown.
• Touching [Radio Text] switches the information
between Radio Text, Radio Text Plus and PTY
code.
3 Current station frequency
4 Displays the preset stations window (Page 18)
5 [P1] – [P5]
• (Touch) Selects a preset station.
• (Hold) Presets the current station.
6 Displays/hides other available operation keys*
7 TI indicator
8 ST/MONO indicator
9 Seek mode indicator
p Operation keys*
* See the following “Operation keys on source control screen”.
Radio
Radio
Operation keys on source control screen
• The appearance of the operation keys may differ,
however the similar operation keys have the same
operations.
• See also “Common operation keys on source control
screen” on page 8.
Touching the operation keys performs the following
actions:
6
[AME ]*
(Hold) Presets stations automatically.
[MONO]* Activates monaural mode for better FM
reception (stereo effect will be lost).
• The MONO indicator lights up while
monaural mode is activated.
• To deactivate, touch [MONO] again.
[TI]* (For FM RBDS features)
Activates TI standby reception mode.
• When TI is activated, the unit is ready
to switch to traffic information if
available. The TI indicator lights up in
white.
• If the TI indicator lights up in orange,
tune into another station providing
Radio Broadcast Data System signals.
• The volume adjustment for Traffic
Information is automatically
memorized. The next time the unit
switches to Traffic Information, the
volume is set to the memorized level.
• To deactivate, touch [TI] again.
17
ENGLISH
ENDDX2018STKR.indb17 2017/05/179:27