Operation Manual

ENGLISH 5
INITIAL SETTINGSINITIAL SETTINGS
• To clear the registered security code, perform
steps 1 and 2.
On step 3, press [CLR] to display <Security Code>
screen. Then, enter the current security code to
clear and press [Enter].
• When the unit has been reset or disconnected
from the battery, you are required to enter the
security code. Enter the correct security code, then
press [Enter].
❏ Activating the security function
You can activate the security function to protect
your receiver system against theft.
1 Display the <System> setting screen.
On the Home screen:
• You can change the page to display more
items by pressing [
]/[ ].
2
The security function is activated.
The security indicator on the monitor panel
flashes when the vehicle ignition is off.
To deactivate the security function: Select [OFF]
for <SI>.
Clock settings
1 Display the Home screen.
On the monitor panel:
2 Display the <Clock> screen.
• You can also display the <Clock> setting
screen by touching the clock area on the
Home screen.
3 Set the clock time.
<NAV>*
1
Synchronizes the clock time with
the connected navigation unit.
<Radio Data
System>*
2
Synchronizes the clock time with
FM Radio Data System.
<DAB>*
3
Synchronizes the clock time with
the digital radio (DAB).
<OFF> Sets the clock manually. (See
below.)
When selecting <OFF>:
Adjust the hour (1), then adjust the minute (2).
• Press [Reset] to set the minute to “00”.
4 Finish the procedure.
*
1
Only for DDX4017DAB/DDX4017BT: Appears only when a navigation
unit is connected.
*
2
Only for DDX4017BT/DDX4017BTR/DDX317BT.
*
3
Only for DDX4017DAB.
2017DDX-Entry_E.indb 52017DDX-Entry_E.indb 5 2016/10/31 14:332016/10/31 14:33