Manual

60
R USB
Reading...” does not disappear from the screen.
Turn the power off and on again.
While playing a track, sound is sometimes
interrupted.
The tracks are not properly copied into the USB
device. Copy tracks again, and try again.
R iPod/iPhone
No sound comes out of the speakers.
Disconnect the iPod/iPhone, then connect it again.
Select another source, then reselect “iPod”.
The iPod/iPhone does not turn on or does not
work.
Check the connecting cable and its connection.
Update the firmware version.
Charge the battery.
Reset the iPod/iPhone.
Sound is distorted.
Deactivate the equalizer either on this unit or the
iPod/iPhone.
A lot of noise is generated.
Turn off (uncheck) “VoiceOver” of the iPod/iPhone.
For details, visit <http://www.apple.com>.
No operations are available when playing back a
track containing Artwork.
Operate the unit after the Artwork is loaded.
Sound does not synchronize with the video.
Select [iPod] for <AV Input>. (Page43)
Videos cannot be played.
Connect with USB Audio and Video cable
KCA-iP22F/KCA-iP202. Other cables cannot be
used.
Select [iPod] for <AV Input>. (Page43)
No sound of videos comes out.
Connect with USB Audio and Video cable
KCA-iP22F/KCA-iP202. Other cables cannot be
used.
Select [iPod] for <AV Input>. (Page43)
R Tuner
AME automatic presetting does not work.
Store stations manually. (Page 20 )
Static noise while listening to the radio.
Connect the aerial firmly.
R Digital Radio (DAB)
Cannot receive an ensemble.
Your area is not covered by the ensemble.
The DAB aerial is not properly extended or
positioned.
Adjust the aerial and try the ensemble scanning
again.
Connect an active antenna (not supplied).
R AV-IN1/AV-IN2
No picture appears on the screen.
Turn on the video component if it is not on.
Connect the video component correctly.
When “AV-IN2” is selected as the source, set <AV
Input> to [AV-IN].
REFERENCESREFERENCES
DDX_Entry_E.indb 60DDX_Entry_E.indb 60 2013/10/30 13:542013/10/30 13:54