Owner's Manual
Table Of Contents
- Instruction Manual
- Reset
- Clock Set
- Initial Setup
- Updating the System
- Table of Contents
- Parts & Controls
- Getting Started / Initial Setup
- Activating the Security Function
- Basic Operation
- Common Operations
- Switching Screens
- Selecting the Source
- Disc Operations
- USB Operations
- iPod / iPhone
- Pandora
- Radio
- SiriusXM
- Listening to External Components
- Sound Adjustments
- Changing Display Design
- Setting for Video Playback
- Using a Rear View Camera
- Using the Remote Control
- Bluetooth Operations
- Setting Menu Items
- Updating the System
- Troubleshooting
- Specs
- Installation
- KSU-BT1 USB Bluetooth Adapter Information
- Corrections to Instruction Manual Supplied with Product (This Manual has Already Been Corrected)
- Warranty
42 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049
Adjusting the cross over
frequency
1 On <Top Menu>:
2
3 Select the item to adjust, then
make adjustment.
Adjusts the subwoofer level.
Adjusts the cross over frequency.
Selects the phase for the subwoofer. *
2
Adjusts the cross over for front or rear
speakers (high pass filter).
Adjusts the cross over for subwoofer
(low pass filter).*
1
*
1
Adjustable only when the subwoofer is
activated. (
☞ page 48)
*
2
Not selectable when <Freq> is set to
<Through>.
Adjusting the sound precisely
1 Perform steps 1 and 2 of
“Selecting a preset sound
mode,” then...
2
3 Adjust the sound of each
band.
Flat Changes level of Bass/
Middle/Treble to 0.
Frequency Selects frequency.
Level Adjusts level.
Q Factor Adjusts the width of the
frequency.
Bass EXT Activates/deactivates
bass.
SW Level Adjusts subwoofer level.*
The adjustments are stored and <User>
is activated.
*
Adjustable only when the subwoofer is activated.
(
☞ page 48)
EN_LVT2268-001A_KR.indb 42EN_LVT2268-001A_KR.indb 42 11/11/22 13:4911/11/22 13:49