GPS NAVIGATION SYSTEM DNX5120 DNX512EX DDX512 DDX5032 MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System/DVD Receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Contents How to read this manual Before Use Notes Navigation Control 4 6 7 14 Using the Navigation System 14 Navigatoin Information Interrupt on the Screen of Other Sources (DNX5120/DNX512EX only) 14 Control of Other Sources While Displaying the Navigation Screen 15 Watching DVD/VCD 16 Functions During the Playback Screen 16 Functions When Displaying the Easy Control Panel 17 Functions While Displaying the Control Screen 17 DVD Disc Menu 18 VCD Zoom Control 20 Music Disc & Audio File Listening 21
Muting Audio Volume upon Reception of Phone Call Hands Free Unit Control 41 Muting Audio Volume upon Reception of Phone Call 41 Character Entry How to Use the Character Entry Screen 42 42 Screen Control 43 Screen Control 43 Setup Menu Setup Menu Audio Setup Crossover Network Setup DVD Setup Language Setup Parental Level Setup System Setup Panel Color Coordinate AV Interface Setup User Interface Direct Source Button Setup Entering Background Background Delete Background Select Touch Panel Adjustment
How to read this manual This manual uses illustrations to explain its operations. The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. Seek Mode Sets a station selection. The mode is switched in following order each time you touch the button.
English B64_3971_0000EN_P01_55.indd 5 5 07.12.
Before Use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. How to reset your unit • If the unit or the connected unit (disc auto changer, etc.) fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.
Notes Navigation units that can be connected to this unit (DDX512/DDX5032 only) Bluetooth unit that can be connected to this unit • KNA-G510* • KNA-DV4100 • KNA-DV3100 • KNA-DV2100 * Update the navigation software to the latest version. For how to update the software, refer to the instruction manual of the navigation unit.
Notes About Audio files • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) ⁄ • If music of normal CD and other playback systems are recorded in the same disc, only the playback system recorded at the first setout is played. • Playable disc media CD-R/RW/ROM, DVD±R/RW • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 6 1 2 3 1 4 5 2 4 DVD disc marks Operation regulatory marks Symbol With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual.
Basic Operations A SI indicator B C D E C B Turns power ON/OFF Switches to the Navigation system Press the button to turn on the power. When the button is pressed and held down for 1 second or more, the power is turned off. Press the button to switch the display to the navigation system screen. E E Adjusts the volume Attenuates the volume Turn it either way to adjust the volume. Press it to attenuate the volume. Press it again to cancel muting.
C Selecting a source Press it to display the source select screen. Touch the source button to select the source. Full Source Select screen 3 1 Scrolls the source display. 2 Displays the Hands Free screen. (page 44) 4 ⁄ 7 1 5 1 6 2 • The displayed source depends on the type of device connected. In addition, you cannot press the button of currently unavailable source. The following buttons are always displayed on the source select screen and source control screen.
Basic Operations A SI indicator B C D E D B Switches to the Hands Free control Switches to the rear view Press it for more than 1 second to the Hands Free control screen. Press it again for more than 1 second to resume the normal display. Press it for more than 1 second to switch to rear view. Press it again for more than 1 second to resume the normal display. ⁄ • Functions of the [NAV] button can be changed to Display Off function.
D Switching the function screen The function control screen switches in the following order each time you press the button. Navigation screen Picture or Video playback screen Source Control screen [FNC] button [FNC] button [FNC] button Easy Control buttons appear. Easy Control buttons appear. Navigation information appears.
Navigation Control Sets and controls the navigation system function. Using the Navigation System Displays the navigation system screen and makes the navigation function available. 1 Displaying the navigation screen Navigation Information Interrupt on the Screen of Other Sources (DNX5120/DNX512EX only) Interrupts other source screen and displays information such as guide point. While a control screen is displaying: Navigation information appears on the bottom of the screen.
Control of Other Sources While Displaying the Navigation Screen When "USB" or "iPod" is selected: 7 8 7 9 Selected source can be controlled while displaying navigation screen. 7 During iPod play : Searches Music or Video. During USB play : Selects a file. 8 Plays or pauses. 9 When touched this area, the source control screen appears. 1 Display the easy control buttons When "TUNER" is selected: 10 10 11 11 12 When "DVD" is selected: p Tunes in a station. q Switches the band (to AM or FM 1/2/3).
Watching DVD/VCD You can play DVD/VCD using various functions. • For the basic method of how to watch DVD/VCD, see (page 10). • Set the remote controller mode switch to "DVD" mode before starting operation, see (page 86). 4 Forward Chapter Search Area Selects the next chapter. 5 Backward Chapter Search Area Selects the previous chapter. 6 DVD Disc Menu Control Buttons Area Displays the Disc Menu Control buttons (page 18).
Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen Displays the basic operation buttons on the screen. Switches to the source control screen to use various playback functions.
Watching DVD/VCD 9 Stops playing. When pressed twice, the disc is played from its beginning when you play it in the next time. p Selects a chapter, a scene or a track. When the DVD-VIDEO/VCD is paused, touch this button to start single-frame stepping. q Plays or pauses. w Slow Forwards or Backwards. (during DVD play) e Switches the button display. r Switches the Repeat Play operations in the following sequence.
Highlight Control You can select a chapter and title for the DVD Menu screen. When you touch the screen, you can select the DVD menu. Top Me n u Ctrl Menu Return q Switches the subtitle language. (during program playback only) w Switches the voice language. (during program playback only) e Displays the Zoom Control screen. r Clears the Disc Menu Control.
Watching DVD/VCD VCD Zoom Control Displays an enlarged VCD screen. 1 Display the Zoom Control screen Mode:Full DVD VCD DVD VCD Scene PBC VER2 3 P 00:05 ST Z o omC t r l AV–OUT:AV–IN IN AF 2 2 2 1 Z o om x2 2 3 Ex i t 1 Changes the zoom ratio at 2 levels (2 times or off ) each time you touch. 2 Scrolls the screen in the direction you touch. 3 Clears the Zoom Control button. 20 DNX5120/DNX512EX/DDX512/DDX5032 B64_3971_0000EN_P01_55.indd 20 07.12.
Music Disc & Audio File Listening You can recall various control screens during CD/Audio file playback. • For the basic method of how to play a music disc/audio file, see (page 10). • See (page 7) for playable discs. • See (page 8) for playable files. Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions.
Music Disc & Audio File Listening During Audio file playback 18 20 19 21 22 23 24 24 26 27 26 28 28 29 30 25 31 34 32 33 35 36 37 38 39 40 i Switches to the playback screen. If there is no playback screen, wallpaper is displalyed. o Folder and File Number Display ; Play Mode Display a Play Time Display s Music information display Selects Folder Name, File Name, Title, Artist Name, or Album Name. When is appeared, the text display is scrolled by pressing it. d Ejects the disc.
Video File/Picture Watching You can recall various control screens during playback of video file (MPEG 1 and MPEG 2 file) and picture file (JPEG file). 5 JPEG: Picture Control Button Area (page 25) MPEG: Not effective 6 Information Display Button Area Function During Playback Screen Basic functions are available even when the playback screen is displayed. ⁄ 1 Display the playback screen • The information display is cleared automatically after approximately 5 seconds.
Video File/Picture File Watching Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen Displays the basic operation buttons on the screen. Switches to the source control screen to use various playback functions.
5 Video/Picture information display Selects Folder Name, File Name, Title, Artist Name, or Album Name. When is appeared, the text display is scrolled by pressing it. 6 Ejects a disc. 7 Fast Forwards or Fast Backwards. (Disabled when a JPEG is being played.) 8 Stops playing. When pressed twice, the disc is played back from its beginning in the next time. 9 Selects a file. p Plays or pauses. q Selects a folder. w Switches the button display.
Radio Listening Various control screens appear in the Tuner Source mode. • For the basic method of receiver button operations, see (page 10). • Set the remote controller mode switch to "AUD" mode before starting operation, see (page 86). Functions While Displaying the Control Screen Switches to the source control screen to use various functions.
Seek Mode 19 21 20 Sets a station selection. 20 o Memorized stations are displayed. Touch to tune in. ; Scrolls the list. a Switches the list display name to Station name or Program Service Name. The mode is switched in following order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency manually. English B64_3971_0000EN_P01_55.indd 27 27 07.12.
Radio Listening Auto Memory Manual Memory Stores stations with good reception in memory automatically. Stores the current receiving station in memory. 1 Select a band you wish to store in memory 1 Select a station you wish to store in memory 2 Select the Auto Memory mode 2 Store in memory 3 Start Auto Memory Continue to touch until the memory number appears. Touch or . Auto Memory terminates when 6 stations are stored or when all stations are tuned in.
# Radio Text Set Station Name You can display the radio text. (Only when receiving the FM broadcast) Assigns a name to a station. : Press for # seconds. 1 Tune in to the station to name 1 Select a station 2 Start Name set 2 Display the radio text 3 Enter the name See (page 42) for information on how to enter a name. 1 4 End Name set 2 2 1 Selects the Program Service Name, Title & Artist name, Station Name, Radio Text Plus, or Radio Text for text display.
Radio Listening Traffic Information Search for Program Type When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. A program is tuned when you set its program type. (Only when receiving the FM broadcast) 1 Enter Program Type mode 1 Set the Traffic information mode When the traffic bulletin starts... The Traffic Information screen appears automatically.
iPod Control You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP300V (optional accessory). You can also display video contents on this unit when connecting an iPod with video. Functions When Displaying the Easy Control Panel Connecting an iPod Connect an iPod to this unit. Displays the basic operation buttons on the screen.
iPod Control Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions. 14 When Video or picture is playing, press the [FNC] button. 15 Mode:Full iPod SCRN TI P 00:00:05 IN or [iPod] button on the "Source Select" screen 2 1 18 ⁄ 4 3 17 1 Image picture Switches to the playback screen. If there is no playback screen, wallpaper is displalyed.
1 19 20 21 22 20 23 o Categories and music are listed. Touch a category name to move its lower level. If music title is displayed, the music is played by touching it. When is appeared, the text display is scrolled by pressing it. When is appeared, all the music in its category is played by touching the button. ; Switches list page. a Returns to previous category. s Moves to the top category. d Displays the currently playing category. English B64_3971_0000EN_P01_55.indd 33 33 07.12.
USB Device Control You can control and listen to songs in your USB device by simply connecting it to the USB connector of this unit. • For the connection of a USB device, see (page 10). Functions When Displaying the Easy Control Panel Functions While displaying the Control Screen Displays the basic operation buttons on the screen. Switches to the source control screen to use various playback functions.
2 1 u Displays images in the folder currently being played one after another. If there is no image in the folder currently being played, initial background is displayed. For information on setting the image display time, see (page 60). i Displays the folder list. See (page 36). o Displays the list of category. ; Displays information screen of music being played. 4 3 5 7 6 10 11 8 12 13 9 14 15 16 ⁄ * Disabled during play list mode.
USB Device Control Folder Select Searches folders and Audio files stored in the USB device according to hierarchy. 1 Start Folder Select 2 Select music 1 2 3 4 2 5 6 1 Lists folders and Audio files Folder opens when touched, and the Audio file is played. 2 Scrolls the list. 3 Moves to the top hierarchy level. 4 Moves up a hierarchy level. 5 Moves to the top category. 6 Displays the currently playing file. 36 DNX5120/DNX512EX/DDX512/DDX5032 B64_3971_0000EN_P01_55.indd 36 07.12.
Sirius/XM Control (North American sales area only) Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite radio connected only. To connect the Sirius tuner, a conversion cable CA-SR20V (optional accessory) is necessary and to connect the XM tuner, an XM interface Box KCA-XM100V (optional accessory) is necessary.) • This document uses the SIRIUS display as an example.
Sirius/XM Control (North American sales area only) Channel Search Channel Memory Specifying the desired category and selecting a channel. Stores the current receiving channel in memory. 1 Select a channel you wish to store in memory 1 Start Channel Search 2 Store in memory 2 Select a category 2 1 3 2 1 Selects a category. Displays all the channels in the selected category. 2 Scrolls the category. 3 Displays all the channels. Continue to touch until the memory number appears.
# : Press for # seconds. Direct Channel Search Tuning in by entering the desired channel number. 1 Start Direct Channel Search 2 Enter the channel number 1 2 3 1 Enters the channel number. 2 Cancels the direct channel search. 3 Clears the channel number. 3 Tune in the channel English B64_3971_0000EN_P01_55.indd 39 39 07.12.
Bluetooth Audio Control When KCA-BT200 (optional accessory) is connected, you can listen to audio files stored in Bluetooth audio player and cell-phone. • You need to register your audio player and cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the Bluetooth Unit as well. Functions While Displaying the Control Screen Switches to control screen to use various functions. [Bluetooth] button on the "Source Select" screen 1 4 1 2 3 4 3 2 4 Plays. Pauses.
Muting Audio Volume upon Reception of Phone call When the telephone is called, the system is paused automatically. Muting Audio Volume upon Reception of Phone Call When the telephone is called... The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen When the call ends... Hang up the phone. The system resumes playing automatically. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory.
Character Entry When you select the Set Station Name mode or others, the following screen appears for character entry. How To Use the Character Entry Screen Character Entry screen 1 1 3 2 3 4 5 6 7 1 Shifts the cursor. 2 Enters characters. 3 Scrolls up or down the character button display. 4 Sets the key layout of the character buttons. abc : Alphabetical key layout. qwe : Qwerty key layout. 5 Enters a space. If you erase a character, locate the cursor on it and touch this button.
Screen Control Setting the monitor screen. Screen Control or Off according to the Navigation Day/Night display setting. 7 Returns to the previous screen. 1 Display Easy Control panel ⁄ • The Screen Control screen is displayed only when you have applied the parking brake. • The picture quality can be set for each source. • You can set image quality of screens such as menu from (page 68) of the .
Hands Free Unit Control Various functions can be used in the Hands Free control mode. (with the optional accessory Bluetooth unit connected only) • You need to register your cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the Bluetooth Unit as well • To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of your Bluetooth Unit and your cell-phone.
⁄ When Received a Call • While your car is moving, some functions are disabled for safety’s sake. The buttons associated with the disabled functions become ineffective if pressed. • When the Hands-Free Control screen appears, the name of the connected cell-phone is displayed for 5 seconds. • * Since the number of steps of the control unit is different from that of the cell-phone, the statuses displayed on the control unit may discord from those displayed on the cell-phone.
Hands Free Unit Control Calling by Entering a Phone Number Quick Dialing Makes a call by entering a phone number. You can register up to 6 phone numbers for quick dialing. 1 Display the number input screen ⁄ • Phone numbers must be registered in advance. See (page 54). 1 Recall the phone number 2 Enter a phone number 1 2 Make a call 2 3 4 1 Calls the entered phone number. 2 Creates an SMS for the entered phone number. See (page 55).
Controlling Tone-based Services Calling by Phonebook Uses tone base service using DTMF (Dual Tone Multi Frequency). You can call a person using his/her phone number that you have registered in the Phonebook. 1 Display the DTMF input screen Display the Talking screen. See (page 46). 1 Display the Phonebook screen The Initial Input screen appears.
Hands Free Unit Control r Calls the selected phone number. t Creates an SMS for the displayed phone number. See (page 55). y Scrolls the phone number. u Returns to the Name List screen. Cyrillic alphabet search screen 5 2 2 3 5 Make a call 5 Displays the Phonebook beginning with the name whose first character you have touched. ⁄ 3 Select the name to call 6 9 8 10 7 11 12 7 • To use the Phonebook, it must have been downloaded from the cell-phone.
Making a Call Using Outgoing/Incoming Call Records Calls by selecting a phone number from the outgoing or incoming calls list. ⁄ • The Outgoing Calls list screen or Incoming Calls list screen shows the list of the calls originated from or received at this unit. They are not the ones stored in the cell-phone memory. 1 Display the Outgoing Calls or Incoming Calls screen : Outgoing Calls : Incoming Calls The Outgoing Calls or Incoming Calls list screen appears.
Hands Free Unit Control Calling by Voice Recognition If you hear another Beep sound: Speak the key word within 2 seconds after the Beep, or touch the [Phonebook List] button to select the phone number. Calls by recognizing the registered voice. ⁄ • In order to perform voice recognition, voice must be registered in the Phonebook data. See (page 52). Or, to perform voice recognition by Phone number category (Home, Office, Mobile etc.
5 Sets the beep of the incoming SMS. ( "ON") "ON": Beep is heard. "OFF": Beep is canceled. 6 Returns to the Hands-Free Control screen. 7 Returns to the "Hands Free Setup 1" screen. 8 Sets whether to use cell-phone phonebook, outgoing calls list and incoming calls list. ( "ON") "ON": Yes. "OFF": No. 9 Sets the SMS function. ( "ON") "ON": Use SMS function. "OFF": SMS not available. p Registers the voice to select phone number category with voice recognition. See (page 53).
Hands Free Unit Control Voice Recognition 5 End voice registration Registers voice for voice recognition in Phonebook. Up to 35 voices can be recorded in one cell-phone. 1 Select the name to register Go through the procedure of (page 47). ⁄ 1 • A message is displayed if the voice is not recognized. Read the message for the further operation. • Repeat from 1st try if the voice is different from the 1st try. 1 Selects a name.
Key Word Voice Recognition 4 Utter the voice to register (1st try) Registers the voice to select the Phone number category by Voice Recognition. 7 1 Display the Key Word List screen Display the "Hands Free" screen and touch [Setup]. See (page 44). 6 6 Registers the voice. 7 Cancels voice registration. Utter within 2 seconds after the Beep.
Hands Free Unit Control p Deletes the currently displayed phone number. q Returns to the previous screen. Phone Number Preset Registers frequently used phone number to Hands Free control screen preset button. 1 Display the Hands Free Preset List screen Display the "Hands Free" screen and touch [Setup]. See (page 44). 4 Search phone number to register with each function 5 Register phone number ⁄ • Press [Delete] to delete the registered phone number.
SMS (Short Message Service) SMS Message screen Uses SMS function. 10 1 Display the SMS Select screen 11 12 13 12 p Calls the number in the selected message. q Creates a new message for the selected message. w Scrolls the message. e Returns to the previous screen. 2 Select a function 4 Create a message 1 2 15 14 3 4 5 1 Displays received message list. 2 Displays sent message list. 3 Displays the Message screen. If there is an unfinished message, the button will be active.
Setup Menu You can set up various receiver parameters. Setup Menu Audio Setup Displays the Setup menu to set various functions. You can setup a speaker network, etc. 1 Display the control screen of any source 1 Display the Audio Setup screen Touch Menu" screen (page 56). in the "Setup ⁄ Touch any source button on the "Source Select" screen. 2 Display the Setup Menu • [Audio Setup] cannot be selected under the following conditions: – When no source is selected.
Crossover Network Setup DVD Setup You can set a crossover frequency of speakers. You can set up the DVD play. 1 Select the speaker to set the crossover 1 Display the DVD Setup screen Touch Menu" screen (page 56). 1 1 2 2 in the "Setup 2 Setup each item 1 2 4 3 1 2 3 4 3 Sets the High Pass Filter of the front speaker. Sets the High Pass Filter of the rear speaker. Sets the Low Pass Filter of the sub woofer. Switches to the crossover setup screen.
Setup Menu 6 7 8 Language Setup Selects a language you use for the speech and menus. 9 1 Select the language item to set 10 6 Returns to the "DVD Setup 1" screen. 7 Sets an angle mark display. ( "On") 8 Selects the screen display mode.*1 ( "16:9") "16:9": Displays wide pictures. "4:3 LB": Displays wide pictures in the Letter Box format (having black stripes at the top and bottom of screen). "4:3 PS": Displays wide pictures in the Pan & Scan format (showing pictures cut at the right and left ends).
Parental Level Setup 4 Select a parental level and complete the setup Sets a parental level. 1 Display the Parental Level code number screen 6 See (page 57) and touch [Parental Level]. 6 7 6 Selects a parental level. 7 Complete the parental level setup and returns to the "DVD Setup 2" screen. ⁄ 2 Enter the code number 1 2 • If a disc has higher parental lock level, you need to enter the code number. • The parental lock level varies depending on a loaded disc.
Setup Menu System Setup 6 7 8 You can set up the system parameters. 9 1 Display the System Setup screen Touch Menu" screen (page 56). in the "Setup 2 Setup each item 1 2 3 4 5 1 Moves to the "System Setup 2" screen. 2 Turns the key touch tone On or Off. ( "ON") 3 Allows scrolling of text display on the Source Control screen. ( "Auto") "Auto": Scrolls the screen automatically. "Manual": Allows you to scroll the screen manually. 4 Selects a remote control signal.
# t Selects a picture display time. ( "Middle") The Display of a JPEG picture is changed. ("Short", "Middle", "Long") : Press for # seconds. 4 Adjusts the Blue. 5 Returns to the "Panel Color Coordinate" screen. 3 Select a Preset number to register Panel Color Coordinate Sets the screen and button illumination color. 1 Display the Panel Color Coordinate screen Adjusted color is registered to the selected Preset button. 4 Complete the color coordination See (page 60).
Setup Menu AV Interface Setup 5 6 7 You can set audio and visual (AV) interface parameters. 8 9 1 Display the AV Interface screen 10 Touch Menu" screen (page 56). in the "Setup 5 Returns to the "AV Interface 1" screen. 6 Moves to the "AV Interface 3" screen. 7 Selects an AV source to be output at the AV OUTPUT port. ( "AV-IN") 2 Setup each item 1 2 3 4 1 Moves to the "AV Interface 2" screen. 2 Sets a name to be displayed when you select a system that is connected via the AV INPUT port.
11 12 13 14 15 q Returns to the "AV Interface 2" screen. w Selects speakers used for voice guidance of the navigation system. ( "Front L") "Front L": Uses the front left side speaker for voice guidance. "Front R": Uses the front right side speaker for voice guidance. "Front LR": Uses both front speakers for voice guidance. e Adjusts the volume for voice guidance of the navigation system. ( "21") r Mutes the volume during voice guidance of the navigation system.
Setup Menu User Interface You can set up user interface parameters. 1 Display the User Interface screen Touch Menu" screen (page 56). in the "Setup 2 Setup each item 1 2 3 4 1 Moves to the "User Interface 2" screen. 2 Selects the background to display. "Change": Displays images entered into this unit. See (page 67). 3 Enables entering or deleting of background images into or from this unit. Press to enter the USB suspend mode, and then remove the USB device.
14 Direct Source Button Setup 15 16 Registers the source displayed in the favorite source screen. 1 Displays the Direct SRC button Setup screen r Returns to the "User Interface 3" screen. t Sets whether to display the name of the , , , and buttons on the right side of the menu screen. y Registers the source displayed in the favorite source screen. See (page 65). See (page 64).
Setup Menu Entering Background Background Delete Loads a image for background. Deletes the background image. 1 Connect the device which has the image to load 1 Delete the image you have loaded 2 Display the User Interface screen Touch Menu" screen (page 56). in the "Setup 3 Display the Background Memory screen 2 Confirm 1 4 Select the image to load 1 Returns to the Pictrue Select screen. 1 3 2 4 2 5 1 2 3 4 5 Lists the files. Scroll the list. Returns to Media Select screen.
Background Select Touch Panel Adjustment Selects a image for background. You can adjust the touch panel operations. 1 Select Background Change screen 1 Display the Touch panel Adjustment screen Touch Menu" screen (page 56). in the "Setup 2 Start Touch panel setup 2 Select a image for background 2 1 3 Adjust the Touch panel 1 Returns to the initial background. 2 Returns to the original screen. 1 2 3 Set the image as the background Follow the instruction on the screen and touch the center of .
Setup Menu Clock Setup Monitor Setup You can adjust the clock time. You can adjust the position, picture quality and the screen mode of the monitor. 1 Display the Clock Setup screen Touch Menu" screen (page 56). in the "Setup 1 Displaying the Monitor SETUP screen Touch Menu" screen (page 56). in the "Setup 2 Setup the Clock 2 Setup each item 2 1 3 2 1 2 5 3 4 3 5 4 1 2 3 4 Clock time display Adjusts hours. Adjusts minutes. Sets "00" minute.
8 Selects a screen mode of the DVD playback screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" 9 Selects a screen mode of the iPod VIDEO playback screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" p Selects a screen mode of the USB playback screen. You can select any of the following screen mode.
Setup Menu Security Code Setup 4 Register your security code You can set a security code to protect your receiver system against theft. ⁄ • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 digit number of your choice. 1 Display the Security Code Setup screen Touch Menu" screen (page 56).
If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code Deactivating Security Code To deactivate the Security Code function. 1 Display Security Code Setup screen Touch Menu" screen (page 56). in the "Setup 2 Start to cancel a registration of the Security Code You must enter the same security code as that you have entered in Step 3. 2 Enter the security code 3 Enter a security Code Now, you can use your Receiver.
Setup Menu iPod Setup Sirius Setup Performs setup when using iPod. You can set up the Parental lock for Sirius. 1 Display the iPod Setup screen Touch Menu" screen (page 56). in the "Setup 1 Display the Sirius Setup screen Touch Menu" screen (page 56). in the "Setup 2 Setup each item 1 1 2 2 3 1 Sets the Audio book playback speed. 2 Sets Wide Screen on or off. ⁄ • "Wide Screen" cannot be set while the iPod is connected. 72 1 Sets the Parental lock code.
Sirius Parental Code Setup 4 Confirm the code number Sets a Sirius Parental code. Enter the same code number as you input in step 3. 1 Display the Parental Code screen Sirius Parental code is now set, and the display returns to SIRIUS Setup screen. ⁄ • If you have already completed the code registration, is displayed. • If you to clear the code which has already registered, press . 2 Enter the current code number 1 2 3 4 5 1 Enters a code number.
Setup Menu Sirius Parental Lock Setup Sirius Parental Lock Channel Select Sets a Sirius Parental Lock function on or off. Selects the channel to enable Sirius Parental lock function. 1 Display the Parental Code screen 1 Display the Parental Code screen ⁄ • You need to complete beforehand. 2 Enter the code number 2 Enter the code number Enter the same code number as you input in .
Bluetooth Setup 4 Set the parental lock for each channel 7 5 6 Registers and selects Bluetooth unit. 1 Display the Bluetooth Setup screen Touch Menu" screen (page 56). 6 8 9 in the "Setup 10 11 5 Lists the channel. The channel name scrolls by pressing . 6 Scrolls the channel list. 7 Sets the Parental lock function on or off for each channel. You need to input the Parental code to switch the Parental lock function on or off.
Setup Menu Registering Bluetooth Unit 4 Enter PIN code Registers the Bluetooth unit to be connected. Enter the PIN code specified for the Bluetooth unit to register. 1 Display the Connect Device List screen 12 13 14 15 w e r t 2 Search for a Bluetooth unit 1 Enters a code number. Cancels registration of PIN code. Enters PIN code. Clears the code number. 2 3 4 5 1 Displays the registered Bluetooth unit. Displays the busy service in red. Displays the available service in gray.
Registering Bluetooth Unit PIN Code Registering Special Bluetooth Unit Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side. Registers Special Bluetooth unit that results in error by normal operation by selecting from model name. 1 Display the Receiver PIN Code screen 1 Display the Special Device List screen 2 Enter PIN code 2 Select a model name 1 1 2 2 3 3 3 4 4 1 2 3 4 Enters a code number. Cancels registration of PIN code.
Setup Menu Bluetooth Unit Connection Deleting Bluetooth Unit Selects the Bluetooth unit to connect. Deletes the registered Bluetooth unit. 1 Display the Connect Device List screen 1 Display the Connect Device List screen 2 Select a registered Bluetooth unit 2 Select a Bluetooth unit to delete 1 2 3 1 Displays the registered Bluetooth unit. 2 Scrolls the name of the Bluetooth unit. 3 Returns to the previous screen.
Software Information Checks the software version of this unit. 1 Display the Software Information screen Touch Menu" screen (page 56). in the "Setup 1 1 Displays the software version. English B64_3971_0000EN_P56_100.indd 79 79 07.12.
Setup Menu Setup Memory 3 Memorize or recall the settings Audio Set Up and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. 1 Display the Setup Memory screen Touch Menu" screen (page 56). in the "Setup When memorizing the Audio Setup and AV Interface settings: If settings have already been memorized, a confirmation message appears. Touch .
English B64_3971_0000EN_P56_100.indd 81 81 07.12.
Audio Control Audio Control Menu Audio Control Displays the Audio Control menu to set the sound effect function of this unit. You can adjust the front/rear and right/left audio balance. 1 Display the control screen of any source 1 Display Audio Control screen Touch in the "Audio Control Menu" screen (page 82). 2 Set the each item 1 4 5 2 6 Touch any source button on the "Source Select" screen.
9 Adjusts the volume of the present source based on the difference level of original volume. ⁄ • If you have increased the volume first, then reduced the volume using the "Vol. Offset", the sound generated if you suddenly switch to another source may be extremely loud. Equalizer Control You can set up the equalizer. 1 Display Equalizer Control Touch in the "Audio Control Menu" screen (page 82). 2 Display the Equalizer screen 1 2 3 1 Selects an equalizer curve type.
Audio Control Tone Setup Zone Control You can set a Tone curve. You can set the front and rear audio source. 1 Display the Tone screen 1 Display Zone Control Touch in the "Audio Control Menu" screen (page 82). 1 See (page 83). 2 Set the Tone 1 2 5 3 6 4 7 1 Displays the current source. 2 Set the Zone Control 2 8 9 3 1 2 3 4 5 6 7 Tone curve becomes flat. Bass adjustment items are displayed. Middle adjustment items are displayed. Treble adjustment items are displayed.
set to "Front", "DVD" or "USB", the same source screen or control screen is displayed in the rear monitor. See (page 62). English B64_3971_0000EN_P56_100.indd 85 85 07.12.
Remote Controller This unit can be operated using the optional Remote Controller KNA-RCDV330. ¤ • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving. • Do not place the battery near an open flame or heat source. This may cause the battery to explode. • Do not recharge, short, break up or heat the battery or place it in an open fire.
ZOOM MENU OUT O ZOOM AUD IN POSITION O O O AUD ENTER • DVD • • Volume control Adjusts the volume. ENTER Enters options. ZOOM MENU OUT IN POSITION O O O FM+ ENTER O O O D O 1 O ANGLE ZOOM AM− O Y 2 ZONE • DVD • TV• • NAVI O VOL AUDIO RETURN MODE/TOP MENU FNC/MENU/PBC 2ABC 3 DEF Volume attenuator Press the key once to lower the volume. Press again to restore the previous volume. Hands-free communication Enters the dialing method selection mode.
Remote Controller DVD/VCD/CD/Audio files (DVD mode) CD Folder search Selects the folder to be played. Track number Play time Cancel ANGLE FM+ O O O D O 1 O Audio files VOL ZOOM AM− O Y 2 ZONE 2ABC 3 DEF 1 Track search and file search Selects the track or file to be played. VIEW VCD 1.X, VCD 2.X (PBC OFF) MAP DIR ANGLE FM+ Track number Cancel O O O D O 1 O Folder number File number Cancel VOL ZOOM AM− O Y 2 ZONE 2ABC 3 DEF 1 VCD 2.
OPEN VIEW MAP DIR SUBTITLE 1 ANGLE O SUBTITLE Switches the subtitle language. D ZOOM O Y 2 ZONE 2ABC 3 DEF 1 Station selection Switches to broadcast stations received by the unit. VIEW MAP DIR AUDIO RETURN ANGLE OPEN VIEW MAP DIR SUBTITLE O ANGLE O FM+ O D O O VOL ZOOM VIEW 1 ZOOM VOL AM− O Y 2 ZONE 2ABC 3 DEF Direct tuning After pressing this key, use the keypad to specify the broadcast station you wish to receive.
Remote Controller ZOOM IN MODE/TOP MENU FNC/MENU/PBC POSITION O AUD DVD • ZOOM OUT OPEN VIEW MAP DIR AUDIO RETURN CANCEL SUBTITLE ANGLE TV• • AUDIO RETURN VIEW Switches between 2D and 3D map displays. ENTER Performs the selected function.
DVD Language Codes Code Language Code Language Code Language aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gli gn gu ha he hi hr hu hy ia ie ik id Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish
Help? Troubleshooting Some functions of this unit may be disabled by some settings made on this unit. ! ! • Cannot set up the subwoofer. • Cannot set up subwoofer phase. • No output from the subwoofer. • Cannot set up the low pass filter. • Cannot set up the high pass filter. ▲ Subwoofer is not set to On. ☞
English B64_3971_0000EN_P56_100.indd 93 93 07.12.
Help? Error When the unit fails to operate correctly, the cause of the failure appears on the display. Protect : Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. Error 07–67: The unit is not operating correctly due to some reason or other. ➡ Push the unit's Reset button. If the "Error 07−67" message does not disappear, see your nearest Kenwood dealer.
Check Sirius: The unit cannot recognize the connected Sirius Tuner Box. ➡ Check the connection of the Sirius Tuner Box. CH UNAUTHORIZED: The selected channel is not subscribed. OFF AIR: The broadcast of the selected channel has finished. Antenna Error: Something is wrong with the anntena. ➡ Check the connection of the antenna. Acquring Signal: The unit cannot receive any signal. ➡ Move the vehicle to the area where the unit can receive signal. Updating Firmware: Updating the firmware of Sirius tuner.
Specifications Monitor section USB interface section Picture Size : 6.1 inches (diagonal) wide : 136.08 mm (W) x 71.96 mm (H) Display Sytem : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 336,960 (480H x 234V x RGB) Effective Pixels : 99.99 % Pixel Arrangement : RGB striped arrangement Back Lighting : Cold Cathode Fluorescent Tube USB Standard : USB 1.1/ 2.
Video section Color System of External Video Input : NTSC External Video Input Level (mini jack) : 1 Vp-p/ 75 Ω External Audio Max Input Level (mini jack) : 2 V/ 25 kΩ Video Output Level (RCA jacks) : 1 Vp-p/ 75 Ω Audio Output Level (RCA jacks) : 1.2 V/ 10 kΩ Analog RGB input (DDX512/DDX5032 only) : 0.7 Vp-p/ 75 Ω Audio section Maximum Power (Front & Rear) : 50 W x 4 Full Bandwidth Power (Front & Rear) (4 Ω, 14.
The "AAC" logo is trademark of Dolby Laboratories. Apple, the Apple logo, and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
2CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J.
B64_3971_0000EN_P56_100.indd 100 07.12.