GPS NAVIGATION SYSTEM DNX5220BT DNX5220 DDX5022 DDX5022Y DDX52RY MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL © B64-3978-00/00 (EW/E2W/E3W) B64̲3978̲0000EN̲P01̲55.indd 1 07.12.
Contents How to read this manual Before Use Notes Navigation Control 4 6 7 14 Using the Navigation System 14 Navigatoin Information Interrupt on the Screen of Other Sources (DNX5220BT/DNX5220 only) 14 Control of Other Sources While Displaying the Navigation Screen 15 Watching DVD/VCD 16 Functions During the Playback Screen 16 Functions When Displaying the Easy Control Panel 17 Functions While Displaying the Control Screen 17 DVD Disc Menu 18 VCD Zoom Control 20 Music Disc & Audio File Listening 21
Muting Audio Volume upon Reception of Phone Call Hands Free Unit Control 42 Muting Audio Volume upon Reception of Phone Call 42 Character Entry How to Use the Character Entry Screen 43 43 Screen Control 44 Screen Control 44 Setup Menu Setup Menu Audio Setup Crossover Network Setup DVD Setup Language Setup Parental Level Setup DivX Setup System Setup Panel Color Coordinate AV Interface Setup User Interface Direct Source Button Setup Entering Background Background Delete Background Select Touch Panel
How to read this manual This manual uses illustrations to explain its operations. The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. Seek Mode Sets a station selection. The mode is switched in following order each time you touch the button.
English B64̲3978̲0000EN̲P01̲55.indd 5 5 07.12.
Before Use 2WARNING Handling discs To prevent injury or fire, take the following precautions: • Do not touch the recording surface of the disc. • Do not stick tape etc. on the disc, or use a disc with tape stuck on it. • Do not use disc type accessories. • Clean from the center of the disc and move outward. • When removing discs from this unit, pull them out horizontally. • If the disc center hole or outside rim has burrs, use the disc only after removing the burrs with a ballpoint pen etc.
Notes Navigation units that can be connected to this unit (DDX5022/DDX5022Y/DDX52RY only) • • • • • * KNA-G520* KNA-G420* KNA-G421* KNA-DV3200 KNA-DV2200 Update the navigation software to the latest version. For how to update the software, refer to the instruction manual of the navigation unit.
Notes About Audio files • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) ⁄ • If music of normal CD and other playback systems are recorded in the same disc, only the playback system recorded at the first setout is played. • Playable disc media CD-R/RW/ROM, DVD±R/RW • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 6 1 2 3 1 4 5 2 4 DVD disc marks Operation regulatory marks Symbol With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual.
Basic Operations A SI indicator B C D E C B Turns power ON/OFF Switches to the Navigation system Press the button to turn on the power. When the button is pressed and held down for 1 second or more, the power is turned off. Press the button to switch the display to the navigation system screen. E E Adjusts the volume Attenuates the volume Turn it either way to adjust the volume. Press it to attenuate the volume. Press it again to cancel muting.
C Selecting a source Press it to display the source select screen. Touch the source button to select the source. Full Source Select screen 3 1 Scrolls the source display. 2 Displays the Hands Free screen. (page 45) 4 ⁄ 7 1 5 1 6 2 8 Favorite Source Select screen 9 • The displayed source depends on the type of device connected. In addition, you cannot press the button of currently unavailable source. The following buttons are always displayed on the source select screen and source control screen.
Basic Operations A SI indicator B C D E D B Switches to the Hands Free control Turns the display OFF Press it for more than 1 second to the Hands Free control screen. Press it again for more than 1 second to resume the normal display. Press it for more than 1 second to turn the display off. Press [NAV], [SRC] or [FNC] button, or touch the screen to resume the normal display. ⁄ • Functions of the [NAV] button can be changed to rear view function.
D Switching the function screen The function control screen switches in the following order each time you press the button. Navigation screen Picture or Video playback screen Source Control screen [FNC] button [FNC] button [FNC] button Easy Control buttons appear. Easy Control buttons appear. Navigation information appears.
Navigation Control Sets and controls the navigation system function. Using the Navigation System Displays the navigation system screen and makes the navigation function available. 1 Displaying the navigation screen Navigatoin Information Interrupt on the Screen of Other Sources (DNX5220BT/DNX5220 only) Interrupts other source screen and displays information such as guide point. While a control screen is displaying: Navigation information appears on the bottom of the screen.
Control of Other Sources While Displaying the Navigation Screen When "USB" or "iPod" is selected: 7 8 7 9 Selected source can be controlled while displaying navigation screen. 7 During iPod play : Searches Music or Video. During USB play : Selects a file. 8 Plays or pauses. 9 When touched this area, the source control screen appears. 1 Display the easy control buttons When "TUNER" is selected: 10 10 11 11 12 When "DVD" is selected: p Tunes in a station. q Switches the band (to AM or FM 1/2/3).
Watching DVD/VCD You can play DVD/VCD using various functions. • For the basic method of how to watch DVD/VCD, see (page 10). • Set the remote controller mode switch to "DVD" mode before starting operation, see (page 82). Functions During the Playback Screen 4 Forward Chapter Search Area Selects the next chapter. 5 Backward Chapter Search Area Selects the previous chapter.
Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen Displays the basic operation buttons on the screen. Switches to the source control screen to use various playback functions.
Watching DVD/VCD 9 Stops playing. When pressed twice, the disc is played from its beginning when you play it in the next time. p Selects a chapter, a scene or a track. When the DVD-VIDEO/VCD is paused, touch this button to start single-frame stepping. q Plays or pauses. w Slow Forwards or Backwards. (during DVD play) e Switches the button display. r Switches the Repeat Play operations in the following sequence.
Highlight Control You can select a chapter and title for the DVD Menu screen. When you touch the screen, you can select the DVD menu. Top Me n u Ctrl Menu Return q Switches the subtitle language. (during program playback only) w Switches the voice language. (during program playback only) e Displays the Zoom Control screen. r Clears the Disc Menu Control.
Watching DVD/VCD VCD Zoom Control Displays an enlarged VCD screen. 1 Display the Zoom Control screen Mode:Full DVD VCD DVD VCD Scene PBC VER2 3 P 00:05 ST Z o omC t r l AV–OUT:AV–IN IN AF 2 2 2 1 Z o om x2 2 3 Ex i t 1 Changes the zoom ratio at 2 levels (2 times or off ) each time you touch. 2 Scrolls the screen in the direction you touch. 3 Clears the Zoom Control button. 20 DNX5220BT/DNX5220/DDX5022/DDX5022Y/DDX52RY B64̲3978̲0000EN̲P01̲55.indd 20 07.12.
Music Disc & Audio File Listening You can recall various control screens during CD/Audio file playback. • For the basic method of how to play a music disc/audio file, see (page 10). • See (page 7) for playable discs. • See (page 8) for playable files. Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions.
Music Disc & Audio File Listening During Audio file playback 18 20 19 21 22 23 24 24 26 27 26 28 28 29 30 25 31 34 32 33 35 36 37 38 39 40 i Switches to the playback screen. If there is no playback screen, wallpaper is displalyed. o Folder and File Number Display ; Play Mode Display a Play Time Display s Music information display Selects Folder Name, File Name, Title, Artist Name, or Album Name. When is appeared, the text display is scrolled by pressing it. d Ejects the disc.
Video File/Picture Watching You can recall various control screens during playback of video file (MPEG 1, MPEG 2 and DivX file) and picture file (JPEG file). Function During Playback Screen 5 JPEG: Picture Control Button Area (page 25) DivX: Sub=Off, Audio 1/1 MPEG: Not effective 6 Information Display Button Area Basic functions are available even when the playback screen is displayed. ⁄ 1 Display the playback screen • The information display is cleared automatically after approximately 5 seconds.
Video File/Picture File Watching Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen Displays the basic operation buttons on the screen. Switches to the source control screen to use various playback functions.
5 Video/Picture information display Selects Folder Name, File Name, Title, Artist Name, or Album Name. When is appeared, the text display is scrolled by pressing it. 6 Ejects a disc. 7 Fast Forwards or Fast Backwards. (Disabled when a JPEG is being played.) 8 Stops playing. When pressed twice, the disc is played back from its beginning in the next time. 9 Selects a file. p Plays or pauses. q Selects a folder. w Switches the button display.
Radio Listening Various control screens appear in the Tuner Source mode. • For the basic method of receiver button operations, see (page 10). • Set the remote controller mode switch to "AUD" mode before starting operation, see (page 82). Functions While Displaying the Control Screen Switches to the source control screen to use various functions.
Seek Mode 19 20 Sets a station selection. 20 o Memorized stations are displayed. Touch to tune in. ; Scrolls the list. The mode is switched in following order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency manually. English B64̲3978̲0000EN̲P01̲55.indd 27 27 07.12.
Radio Listening Auto Memory Manual Memory Stores stations with good reception in memory automatically. Stores the current receiving station in memory. 1 Select a band you wish to store in memory 1 Select a station you wish to store in memory 2 Select the Auto Memory mode 2 Store in memory 3 Start Auto Memory Continue to touch until the memory number appears. Touch or . Auto Memory terminates when 6 stations are stored or when all stations are tuned in.
# : Press for # seconds. Radio Text Traffic Information You can display the radio text. (Only when receiving the FM broadcast) When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. 1 Select a station 1 Set the Traffic information mode 2 Display the radio text When the traffic bulletin starts... The Traffic Information screen appears automatically.
Radio Listening Search for Program Type A program is tuned when you set its program type. (Only when receiving the FM broadcast) 1 Enter Program Type mode 2 Select a Program Type 1 3 2 2 4 1 Program Type is displayed. Touch to select a Program Type. 2 Scrolls the Program Type list. 3 Searches for the program type. It is displayed when the Program type is selected. 4 Returns to the previous screen.
iPod Control You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP300V (optional accessory). You can also display video contents on this unit when connecting an iPod with video. Functions When Displaying the Easy Control Panel Connecting an iPod Connect an iPod to this unit. Displays the basic operation buttons on the screen.
iPod Control Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions. 14 When Video or picture is playing, press the [FNC] button. 15 Mode:Full iPod SCRN TI P 00:00:05 IN or [iPod] button on the "Source Select" screen 2 1 18 ⁄ 4 3 17 1 Image picture Switches to the playback screen. If there is no playback screen, wallpaper is displalyed.
1 19 20 21 22 20 23 o Categories and music are listed. Touch a category name to move its lower level. If music title is displayed, the music is played by touching it. When is appeared, the text display is scrolled by pressing it. When is appeared, all the music in its category is played by touching the button. ; Switches list page. a Returns to previous category. s Moves to the top category. d Displays the currently playing category. English B64̲3978̲0000EN̲P01̲55.indd 33 33 07.12.
USB Device Control You can control and listen to songs in your USB device by simply connecting it to the USB connector of this unit. • For the connection of a USB device, see (page 10). Functions When Displaying the Easy Control Panel Functions While displaying the Control Screen Displays the basic operation buttons on the screen. Switches to the source control screen to use various playback functions.
2 1 y Repeats to play the music or data of the present folder. (Only in Folder Select Mode) u Displays images in the folder currently being played one after another. If there is no image in the folder currently being played, initial background is displayed. For information on setting the image display time, see (page 60). i Displays the folder list. See (page 36). o Displays the list of category. ; Displays information screen of music being played.
USB Device Control Folder Select Searches folders and Audio files stored in the USB device according to hierarchy. 1 Start Folder Select 2 Select music 1 2 3 4 2 5 6 1 Lists folders and Audio files Folder opens when touched, and the Audio file is played. 2 Scrolls the list. 3 Moves to the top hierarchy level. 4 Moves up a hierarchy level. 5 Moves to the top category. 6 Displays the currently playing file. 36 DNX5220BT/DNX5220/DDX5022/DDX5022Y/DDX52RY B64̲3978̲0000EN̲P01̲55.indd 36 07.12.
TV Watching Various control screens appear in the TV source mode. You can only operate TV with the optional accessory TV Tuner connected. Function During TV Screen Basic functions are available even when the TV screen is displayed. 1 Display the TV screen Functions When Displaying the Easy Control Panel Displays the basic operation buttons on the screen.
TV Watching Functions While Displaying the Control Screen 7 Select a channel. Use the (page 39) to change the channel tuning sequence. 8 Switches to TV1 or TV2. 9 Switches the button display. p Selects the Auto Memory mode. See (page 39). q Switches the Seek mode. See (page 39). w Indicates current Seek mode. e When to buttons, you can recall channels on memory. For memory of broadcasting stations, see (page 39) or (page 40).
TV Menu (with KTC-D500E (optional accessory) connected only) Menu Control screen appears by touching the area shown below. Mode:Full TV TV TV1 G ro u p 1 AV–OUT:AV–IN Preset 1 IN AUTO1 1 Me n u Ctrl 6 EPG Auto Memory Stores stations with good reception in memory automatically. 1 Select a band you wish to store in memory 2ch AF 2 3 Menu Return 2 Select the Auto Memory mode 6 6 4 6 En t e r 5 Ex i t 1 Shows EPG (Electric Program Guide) screen.
# TV Watching Manual Memory Set Station Name Stores the current receiving channel in memory. Assigns a name to a station. 1 Select a station you wish to store in memory : Press for # seconds. 1 Select a station you wish to name 2 Start Name set 2 Store in memory 3 Enter the name See (page 43) for information on how to enter a name. 4 End Name set Continue to touch until the memory number appears. 40 DNX5220BT/DNX5220/DDX5022/DDX5022Y/DDX52RY B64̲3978̲0000EN̲P01̲55.indd 40 07.
Bluetooth Audio Control You can listen to audio files stored in Bluetooth audio player and cell-phone. For DNX5220/DDX5022/DDX5022Y/DDX52RY, Bluetooth unit KCA-BT200 (optional accessory) is necessary. Before Use For DNX5220BT : • You need to register your audio player and cell-phone before using it with this unit. For more details, see (page 73). • If you have registered two or more audio players or cellphones, you need to select one of them.
Muting Audio Volume upon Reception of Phone call When the telephone is called, the system is paused automatically. Muting Audio Volume upon Reception of Phone Call When the telephone is called... The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen When the call ends... Hang up the phone. The system resumes playing automatically. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory.
Character Entry When you select the Set Station Name mode or others, the following screen appears for character entry. How To Use the Character Entry Screen Character Entry screen 1 1 3 2 3 4 5 6 7 1 Shifts the cursor. 2 Enters characters. 3 Scrolls up or down the character button display. 4 Sets the key layout of the character buttons. abc : Alphabetical key layout. qwe : Qwerty key layout. 5 Enters a space. If you erase a character, locate the cursor on it and touch this button.
Screen Control Setting the monitor screen. Screen Control or Off according to the Navigation Day/Night display setting. 7 Returns to the previous screen. 1 Display Easy Control panel ⁄ • The Screen Control screen is displayed only when you have applied the parking brake. • The picture quality can be set for each source. • You can set image quality of screens such as menu from (page 68) of the .
Hands Free Unit Control Various functions can be used in the Hands Free control mode. For DNX5220/DDX5022/DDX5022Y/DDX52RY, Bluetooth unit KCA-BT200 (optional accessory) is necessary. Before Use • To use the Phonebook, it must be downloaded to this unit in advance. For details, see (page 45). For DNX5220BT : • You need to register your cell-phone before using it with this unit. For more details, see (page 73).
Hands Free Unit Control (page 51). p Displays the Dialing Display screen. See (page 47). q Starts voice recognition. See (page 52). w Returns to the previous screen. 1 2 3 4 8 9 5 6 7 10 11 12 1 Displays the various conditions. : Displays short message status. If a cellphone which supports SMS function is not connected, this mark does not appear. : There is unread short message. : There is no unread short message. : Downloading Phonebook.
Calling by Entering a Phone Number Quick Dialing Makes a call by entering a phone number. You can register up to 6 phone numbers for quick dialing. 1 Display the number input screen ⁄ • Phone numbers must be registered in advance. See (page 54). 1 Recall the phone number 2 Enter a phone number 1 2 Make a call 2 3 4 1 Calls the entered phone number. 2 Creates an SMS for the entered phone number. See (page 55). 3 Clears the number.
Hands Free Unit Control Controlling Tone-based Services Calling by Phonebook Uses tone base service using DTMF (Dual Tone Multi Frequency). You can call a person using his/her phone number that you have registered in the Phonebook. 1 Display the DTMF input screen Display the Talking screen. See (page 47). 1 Display the Phonebook screen The Initial Input screen appears.
4 Select the phone number to call Cyrillic alphabet search screen 14 5 16 2 15 2 17 3 5 Displays the Phonebook beginning with the name whose first character you have touched. r Calls the selected phone number. t Creates an SMS for the displayed phone number. See (page 55). y Scrolls the phone number. u Returns to the Name List screen. 3 Select the name to call 6 9 8 10 7 11 12 5 Make a call 7 13 6 Phonebook data list.
Hands Free Unit Control Making a Call Using Outgoing/Incoming Call Records Calling by Voice Recognition Calls by selecting a phone number from the outgoing or incoming calls list. ⁄ 1 Display the Outgoing Calls or Incoming Calls screen Calls by recognizing the registered voice. • In order to perform voice recognition, voice must be registered in the Phonebook data. See (page 52). Or, to perform voice recognition by Phone number category (Home, Office, Mobile etc.
If you hear another Beep sound: Speak the key word within 2 seconds after the Beep, or touch the [Phonebook List] button to select the phone number. Setting Up the Hands-Free Phone The Hands-Free system can be set as follows. 1 Display the Hands Free Setup screen Make a call. ⁄ • If there are more than one phone numbers registered under the same name, and the key word voice is registered for each phone number, you will hear another beep.
Hands Free Unit Control 5 Sets the beep of the incoming SMS. ( "ON") "ON": Beep is heard. "OFF": Beep is canceled. 6 Returns to the Hands-Free Control screen. 7 Returns to the "Hands Free Setup 1" screen. 8 Sets whether to use cell-phone phonebook, outgoing calls list and incoming calls list. ( "ON") "ON": Yes. "OFF": No. 9 Sets the SMS function. ( "ON") "ON": Use SMS function. "OFF": SMS not available. p Registers the voice to select phone number category with voice recognition.
5 End voice registration 3 Plays voice registered for the selected Phone number category. 4 Deletes voice registered for the selected Phone number category. Touch to display the confirmation screen. Touch [YES] to delete or [NO] to cancel. 5 Returns to the Hands-Free Set Up screen. 3 Display voice registration screen ⁄ • A message is displayed if the voice is not recognized. Read the message for the further operation. • Repeat from 1st try if the voice is different from the 1st try.
Hands Free Unit Control Phone Number Preset p Deletes the currently displayed phone number. q Returns to the previous screen. Registers frequently used phone number to Hands Free control screen preset button. 4 Search phone number to register with each function 1 Display the Hands Free Preset List screen Display the "Hands Free" screen and touch [Setup]. See (page 45). 5 Register phone number ⁄ • Press [Delete] to delete the registered phone number.
SMS (Short Message Service) SMS Message screen Uses SMS function. 10 1 Display the SMS Select screen 11 12 13 12 p Calls the number in the selected message. q Creates a new message for the selected message. w Scrolls the message. e Returns to the previous screen. 2 Select a function 4 Create a message 1 2 15 14 3 4 5 1 Displays received message list. 2 Displays sent message list. 3 Displays the Message screen. If there is an unfinished message, the button will be active.
Setup Menu You can set up various receiver parameters. Setup Menu Audio Setup Displays the Setup menu to set various functions. You can setup a speaker network, etc. 1 Display the control screen of any source 1 Display the Audio SETUP screen Touch Menu" screen (page 56). in the "Setup ⁄ Touch any source button on the "Source Select" screen. 2 Display the Setup Menu • [Audio Setup] cannot be selected under the following conditions: – When no source is selected.
Crossover Network Setup DVD Setup You can set a crossover frequency of speakers. You can set up the DVD play. 1 Select the speaker to set the crossover 1 Display the DVD Setup screen Touch Menu" screen (page 56). 1 1 2 2 in the "Setup 2 Setup each item 1 2 4 3 1 2 3 4 3 Sets the High Pass Filter of the front speaker. Sets the High Pass Filter of the rear speaker. Sets the Low Pass Filter of the sub woofer. Switches to the crossover setup screen.
Setup Menu 6 7 8 Language Setup Selects a language you use for the speech and menus. 9 1 Select the language item to set 10 6 Returns to the "DVD Setup 1" screen. 7 Sets an angle mark display. ( "On") 8 Selects the screen display mode.*1 ( "16:9") "16:9": Displays wide pictures. "4:3 LB": Displays wide pictures in the Letter Box format (having black stripes at the top and bottom of screen). "4:3 PS": Displays wide pictures in the Pan & Scan format (showing pictures cut at the right and left ends).
Parental Level Setup 4 Select a parental level and complete the setup Sets a parental level. 1 Display the Parental Level code number screen 6 See (page 57) and touch [Parental Level]. 6 7 6 Selects a parental level. 7 Complete the parental level setup and returns to the "DVD Setup 2" screen. ⁄ 2 Enter the code number 1 2 • If a disc has higher parental lock level, you need to enter the code number. • The parental lock level varies depending on a loaded disc.
Setup Menu DivX Setup System Setup Checks the registration code. This code is needed when making a disc which has DRM (Digital Rights Management). You can set up the system parameters. 1 Display the System Setup screen Touch Menu" screen (page 56). 1 Display the DivX Setup screen Touch Menu" screen (page 56). in the "Setup in the "Setup 2 Setup each item 1 2 3 4 1 5 1 Moves to the "System Setup 2" screen. 2 Turns the key touch tone On or Off.
6 7 8 9 t Selects a picture display time. ( "Middle") The Display of a JPEG picture is changed. ("Short", "Middle", "Long") Panel Color Coordinate 6 Returns to the "System Setup 1" screen. 7 Moves to the "System Setup 3" screen. 8 Sets the button illumination color. See (page 61). 9 When set to "ON", the illumination color of the screen and buttons changes one after another. 10 Sets the screen and button illumination color.
Setup Menu 2 3 4 5 Adjusts the Red value. Adjusts the Green value. Adjusts the Blue. Returns to the "Panel Color Coordinate" screen. 3 Select a Preset number to register AV Interface Setup You can set audio and visual (AV) interface parameters. 1 Display the AV Interface screen Touch Menu" screen (page 56). in the "Setup 2 Setup each item 1 2 3 4 Adjusted color is registered to the selected Preset button. 4 Complete the color coordination 62 1 Moves to the "AV Interface 2" screen.
# 5 11 6 7 12 8 13 9 14 10 15 5 Returns to the "AV Interface 1" screen. 6 Moves to the "AV Interface 3" screen. 7 Selects an AV source to be output at the AV OUTPUT port. ( "AV-IN") ⁄ • When in DVD source, "AV-OUT" cannot be set to USB. Or, when in USB source, "AV-OUT" cannot be set to DVD. • If "AV-OUT" is set to DVD or USB, the same source video or control screen as the front monitor is displayed in the rear monitor.
Setup Menu User Interface You can set up user interface parameters. 1 Display the User Interface screen Touch Menu" screen (page 56). in the "Setup 2 Setup each item 1 2 3 4 5 1 Moves to the "User Interface 2" screen. 2 Selects the background to display. "Change": Displays images entered into this unit. See (page 67). 3 Enables entering or deleting of background images into or from this unit. Press to enter the USB suspend mode, and then remove the USB device.
16 17 18 Direct Source Button Setup Registers the source displayed in the favorite source screen. 1 Displays the Direct SRC button Setup screen y Returns to the "User Interface 3" screen. u Sets whether to display the name of the , , , and buttons on the right side of the menu screen. i Registers the source displayed in the favorite source screen. See (page 65). See (page 64).
Setup Menu Entering Background Background Delete Loads a image for background. Deletes the background image. 1 Connect the device which has the image to load 1 Delete the image you have loaded 2 Display the User Interface screen Touch Menu" screen (page 56). in the "Setup 3 Display the Background Memory screen 2 Confirm 1 4 Select the image to load 1 Returns to the Pictrue Select screen. 1 3 2 4 2 5 1 2 3 4 5 Lists the files. Scroll the list. Returns to Media Select screen.
Background Select Touch Panel Adjustment Selects a image for background. You can adjust the touch panel operations. 1 Select Background Change screen 1 Display the Touch panel Adjustment screen Touch Menu" screen (page 56). in the "Setup 2 Start Touch panel setup 2 Select a image for background 2 1 3 Adjust the Touch panel 1 Returns to the initial background. 2 Returns to the original screen. 1 2 3 Set the image as the background Follow the instruction on the screen and touch the center of .
Setup Menu Clock Setup Monitor Setup You can adjust the clock time. You can adjust the position, picture quality and the screen mode of the monitor. 1 Display the Clock Setup screen Touch Menu" screen (page 56). in the "Setup 1 Displaying the Monitor Setup screen Touch Menu" screen (page 56). in the "Setup 2 Setup the Clock 2 Setup each item 2 1 3 2 1 2 5 3 4 3 5 4 1 2 3 4 Clock time display Adjusts hours. Adjusts minutes. Sets "00" minute. Setup examples: 3:00 – 3:29 \ 3:00 3:30 – 3:59 \
8 Selects a screen mode of the DVD playback screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" 9 Selects a screen mode of the iPod VIDEO playback screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" p Selects a screen mode of the USB playback screen. You can select any of the following screen mode.
Setup Menu Security Code Setup 4 Register your security code You can set a security code to protect your receiver system against theft. ⁄ • When the Security Code function is activated, it cannot be released. Note that your Security Code is in the 4 digit number entered in your "Car Audio Passport" in this package. 1 Display the Security Code Setup screen Touch Menu" screen (page 56).
If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code iPod Setup Performs setup when using iPod. 1 Display the iPod Setup screen Touch Menu" screen (page 56). in the "Setup 2 Setup each item 1 2 You must enter the same security code as that you have entered in Step 3. 2 Enter the security code 1 Sets the Audio book playback speed. 2 Sets Wide Screen on or off. ⁄ Now, you can use your Receiver.
Setup Menu TV Setup RDS Setup The TV signal receiving areas can be set. (with the optional accessory TV Tuner connected only) You can set RDS related parameters. 1 Display the RDS Setup screen 1 Displaying TV Setup screen Touch Menu" screen (page 56). in the "Setup Touch Menu" screen (page 56). in the "Setup 2 Setup each item 2 Setting up TV 1 1 2 3 4 5 2 1 Moves to "TV2 Area Set" screen. 2 Sets the present TV1 receiving area. 3 1 Moves to "RDS Setup 2" screen.
Bluetooth Setup Registering Bluetooth Unit Registers and selects Bluetooth unit. Registers the Bluetooth unit to be connected. 1 Display the Bluetooth Setup screen Touch Menu" screen (page 56). 1 Display the Connect Device List screen in the "Setup 2 Setup each item 1 2 2 Search for a Bluetooth unit 1 1 Sets cell-phone for Hands Free and Audio player for Bluetooth Audio.
Setup Menu q Returns to the previous screen. Registering Bluetooth Unit PIN Code 4 Enter PIN code Enter the PIN code specified for the Bluetooth unit to register. Sets the PIN code of this unit (DNX5220BT only) or KCA-BT200 to enter when registering (pairing) from the cell-phone or audio player side. 1 Display the Receiver PIN Code screen 12 13 14 15 w e r t Enters a code number. Cancels registration of PIN code. Enters PIN code. Clears the code number.
Registering Special Bluetooth Unit Bluetooth Unit Connection Registers Special Bluetooth unit that results in error by normal operation by selecting from model name. Selects the Bluetooth unit to connect. 1 Display the Connect Device List screen 1 Display the Special Device List screen 2 Select a registered Bluetooth unit 2 Select a model name 1 1 2 2 3 3 3 4 1 Displays the Bluetooth unit name that can be registered. 2 Scrolls the name of the Bluetooth unit. 3 Scrolls.
Setup Menu Deleting Bluetooth Unit Software Information Deletes the registered Bluetooth unit. Checks the software version of this unit. 1 Display the Connect Device List screen 1 Display the Software Information screen Touch Menu" screen (page 56). in the "Setup 1 2 2 Select a Bluetooth unit to delete 1 Displays the software version. 2 Uses for Bluetooth firmware update.
Setup Memory 3 Memorize or recall the settings Audio Setup and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. 1 Display the Setup Memory screen Touch Menu" screen (page 56). in the "Setup When memorizing the Audio Setup and AV Interface settings: If settings have already been memorized, a confirmation message appears. Touch .
Audio Control Audio Control Menu Audio Control Displays the Audio Control menu to set the sound effect function of this unit. You can adjust the front/rear and right/left audio balance. 1 Display the control screen of any source 1 Display Audio Control screen in the "Audio Touch Control Menu" screen (page 78). 2 Set the each item 1 4 5 2 6 Touch any source button on the "Source Select" screen.
9 Adjusts the volume of the present source based on the difference level of original volume. ⁄ • If you have increased the volume first, then reduced the volume using the "Vol. Offset", the sound generated if you suddenly switch to another source may be extremely loud. Equalizer Control You can set up the equalizer. 1 Display Equalizer Control Touch in the "Audio Control Menu" screen (page 78). 2 Display the Equalizer screen 1 2 3 1 Selects an equalizer curve type.
Audio Control Tone Setup Zone Control You can set a Tone curve. You can set the front and rear audio source. 1 Display the Tone screen 1 Display Zone Control Touch in the "Audio Control Menu" screen (page 78). 1 See (page 79). 2 Set the Tone 1 2 5 3 6 4 7 1 Displays the current source. 2 Set the Zone Control 2 8 9 3 1 2 3 4 5 6 7 Tone curve becomes flat. Bass adjustment items are displayed. Middle adjustment items are displayed. Treble adjustment items are displayed.
set to "Front", "DVD" or "USB", the same source screen or control screen is displayed in the rear monitor. See (page 62). English B64̲3978̲0000EN̲P56̲96.indd 81 81 07.12.
Remote Controller For DDX5022Y/DDX52RY : This unit can be operated using the Remote Controller supplied with this unit. For DNX5220BT/DNX5220/DDX5022 : Optional Remote Controller KNA-RCDV330 is designed for controlling this unit. ¤ • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving. • Do not place the battery near an open flame or heat source.
OUT IN O O V.SEL IN POSITION O O O AUD ENTER • DVD • • Volume control Adjusts the volume. ENTER Enters options. OUT POSITION O O O O ZOOM O AM− Y AUD ENTER O VOL • DVD • TV• • NAVI AUDIO RETURN MODE/TOP MENU FNC/MENU/PBC 2 ZONE 2ABC 3 DEF Volume attenuator Press the key once to lower the volume. Press again to restore the previous volume. Hands-free communication Enters the dialing method selection mode. When a call comes in, it answers the call. CANCEL VOICE R.
Remote Controller DVD/VCD/CD/Audio files (DVD mode) CD Folder search Selects the folder to be played. Track number Play time Cancel ANGLE O FM+ O D O O O O Y 1 Audio files VOL ZOOM AM− 2 ZONE 2ABC 3 DEF 1 Track search and file search Selects the track or file to be played. VIEW VCD 1.X, VCD 2.
O MAP DIR O O MODE/TOP MENU FNC/MENU/PBC NAVI OPEN MAP DIR O FM+ D ZOOM VOL O AM− Y 2 ZONE Channel Selection The TV channel to receive is selected. CANCEL VIEW MAP DIR SUBTITLE ANGLE O FM+ O O O D VOL ZOOM O 1 ZOOM Switches the zoom ratio each time you press this key. FM+ D O ANGLE SUBTITLE AUDIO RETURN VOICE VIEW OPEN MAP DIR O SUBTITLE Switches the subtitle language.
Remote Controller Radio (AUD mode) NAVI (NAVI mode) Band switching Switches to bands received by the unit. Joystick Scrolls the map, or moves the cursor. O VOL O 2 ZONE TV• • Station selection Switches to broadcast stations received by the unit. ENTER Performs the selected function.
O ENTER O ROUTEM Displays Route Option menu. O MODE/TOP MENU FNC/MENU/PBC ROUTEM VOICE AV OUT OPEN VIEW MAP DIR • TV• • NAVI AUDIO RETURN CANCEL SUBTITLE ANGLE O VIEW Switches between 2D and 3D map displays.
DVD Language Codes 88 Code Language Code Language Code Language aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gli gn gu ha he hi hr hu hy ia ie ik id Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian
Help? Error When the unit fails to operate correctly, the cause of the failure appears on the display. Protect : Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. ➡ Wire or insulate the speaker cord as appropriate and then push the Reset button (page 6). Hot Error : When the internal temperature of this unit rises to 60°C or more, the protection circuit is activated and you may not be able to operate the unit.
Help? Troubleshooting Some functions of this unit may be disabled by some settings made on this unit. ! ! ! ! General ? • Cannot select the output destination of the subsource in the Dual zone. • Cannot adjust the volume of the rear speakers. ▲ The Dual zone function is disabled. ☞ (page 80) Cannot play audio files. ▲ "CD Read" of (page 60) is set to "2". ? ! Cannot perform Repeat play. ▲ The PBC function is enabled. ! • Cannot set up the equalizer.
English B64̲3978̲0000EN̲P56̲96.indd 91 91 07.12.
Specifications Monitor section USB interface section Picture Size : 6.1 inches (diagonal) wide : 136.08 mm (W) x 71.96 mm (H) Display Sytem : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 336,960 (480H x 234V x RGB) Effective Pixels : 99.99 % Pixel Arrangement : RGB striped arrangement Back Lighting : Cold Cathode Fluorescent Tube USB Standard : USB 1.1/ 2.
Video section Color System of External Video Input : NTSC/PAL External Video Input Level (mini jack) : 1 Vp-p/ 75 Ω External Audio Max Input Level (mini jack) : 2 V/ 25 kΩ Video Output Level (RCA jacks) : 1 Vp-p/ 75 Ω Audio Output Level (RCA jacks) : 1.2 V/ 10 kΩ Analog RGB input (DDX5022/DDX5022Y/ DDX52RY only) : 0.7 Vp-p/ 75 Ω Audio section Maximum Power (Front & Rear) : 50 W x 4 Full Bandwidth Power (Front & Rear) (PWR DIN 45324, +B=14.
The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.
DNX5220/DDX5022/DDX5022Y/DDX52RY: Declaration of Conformity with regard to the EMC Directive 2004/108/EC DNX5220BT: Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative's: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands English Hereby, Kenwood declares that this unit DNX5220BT is in compliance with the essential requirements and other relevant pr
B64̲3978̲0000EN̲P56̲96.indd 96 07.12.
