Owner's Manual

C5
D23
D22
D21
FRONT VIEW CAMERA
REAR VIEW CAMERA
VIDEO OUT
ENGLISH 81
CONNECTION/INSTALLATION
CONNECTION/INSTALLATION
R Connecting wires to terminals for DDX751WBTL (for Toyota Cars)
See page83.
See page83.
See page83.
See page84.
USB terminal (1.0 m): See page82.
10 A fuse
Connect to the vehicle’s reverse lamp
harness when using the optional rear
view camera.
Connect to the
vehicle’s parking
brake detection switch
harness.
• For best safety, be
sure to connect the
parking sensor.
Purple with white stripe (Reverse sensor wire)
Light green (Parking sensor wire)
See page83.
See page 83.
See page83.
3
1
*
1
If no connections are made, do not let the cable come out from the tab.
*
2
When using Antenna Control, connect the ANT CONT lead (blue) to A5
(blue) on the wiring harness.
Connect the antenna cord to the
antenna terminal.
Connect to power control terminal
when using the optional power
amplifier.
Connect to the vehicle’s harness.
Connect to the vehicle’s harness.
Connect to the vehicle’s harness.
• Depending on the type of vehicle, it cannot
be connected. In this case, connect the JASO
plug directly to the unit.
Not used.
Blue with white stripe
(Power control wire)
(12 V
200 mA)
Brown (Mute control wire)
*
1
*
2
Pin Color and functions of Connector A, B, C and D
A1 Orange/White Dimmer
A2 Yellow Battery
A4 Red Ignition (ACC)
A5 Blue Antenna control (12 V
300 mA)
A6 Black Ground connection
A8/A7
White ª / White/Black ·
Left speaker (front)
A10/A9
Gray ª / Gray/Black ·
Right speaker (front)
B2/B1
Green ª / Green/Black ·
Left speaker (rear)
B6/B5
Purple ª / Purple/Black ·
Right speaker (rear)
C5 Blue Antenna control
D21 Light green/Red Input 1
D22 Purple/Red Input 2
D23 Gray/Red Ground
Connector C
Connector B
Connector A
Connect to the vehicle’s steering remote harness.
• Depending on the type of vehicle, it cannot be connected.
Connector D
9
7
2017DDX-EntryK.indb81 2016/10/3113:12