Owner's Manual
Table Of Contents
- Instruction Manual
- Reset
- Clock Set (Menu Item)
- Table of Contents
- Using This Manual
- Parts & Controls
- Initial Setup
- Basic Operation
- Watching a DVD / VCD
- Music Disc & Audio File Playback
- iPod Control
- Radio Operation
- SIRIUS / XM Control
- HD Radio Control
- Bluetooth Audio Control
- Character Entry
- Cell Phone Mute
- Screen Control
- Hands Free Unit Control
- Before Use
- Registering a Bluetooth Unit (Menu Item)
- Downloading the Phonebook
- Receiving a Call
- During a Call
- Call Waiting
- Making a Call
- Calling by Phonebook
- Calling by Entering a Phone Number
- Making a Call Using Call Records
- Calling by Voice Recognition
- Controlling Tone-Based Services
- Setting Up the Hands-Free Phone
- Voice Registration
- Key Word Voice Registration
- Phone Number Preset
- SMS
- Audio Control Settings
- Setup Menu
- Displaying the Setup Menu
- List of Items
- DivX Setup
- Software Information
- User Interface
- Language Setting
- Touch Panel Adjustment
- Clock Setup
- Security Indicator Setup
- Setup Memory
- Entering Background
- Panel Color Coordinates
- Screen Adjustment
- Registering a Bluetooth Unit
- Registering Bluetooth Unit PIN Code
- Bluetooth Unit Connection
- Bluetooth Hands-Free / Audio Output Setup
- AV Input Setup
- AV Interface Setup
- Navigation Setup
- Speaker Setup
- DVD Setup
- DVD Language Setup
- DVD Parental Level Setup
- Disc Setup
- USB Setup
- iPod Setup
- SIRIUS Parental Code Setup
- SIRIUS Parental Lock Setup
- SIRIUS Parental Lock Channel Select
- Using the Remote Control
- Status Bar Indicator Items
- DVD Language Codes
- Troubleshooting
- Error Codes / Messages
- Specs
- Installation Manual
- Kenwood Navigation Note
&
Mounting and wiring this product requires skills and
experience
For
safety's
sake,
leave the
mounting
and wiring
work
to
professionals
Make
sure
to
ground the unit to a negative
12V
DC
power
supply.
Do
not
install the unit in a spot exposed
to
direct sunlight
or excessive heat or humidity. Also avoid places
with
too
much dust or the possibility
of
water splashing.
Do
not
use your
own
screws.
Use
only the screws provided.
If you
use
the wrong
screws,
you could damage the unit.
If the power
is
not
turned
ON
("PROTECT"
is
displayed),
the speaker wire may have a short-circuit or touched the
chassis
of
the vehicle and the protection function may
have been activated. Therefore, the speaker wire should be
checked.
If your
car's
ignition does not have
an
ACC
position, connect
the ignition wires
to
a power source that can
be
turned on
and
off
with
the ignition
key.
If you connect the ignition
wire
to
a power source
with
a constant voltage supply,
as
with
battery wires, the battery may die.
If the console
has
a lid, make
sure
to
install the unit
so
that
the faceplate will not hit the lid when closing and opening.
If the
fuse
blows, first make
sure
the wires aren't touching
to cause a short Circuit, then replace the old fuse
with
one
with
the
same
rating.
Insulate unconnected wires
with
vinyl tape or other similar
material.
To
prevent a short circuit,
do
not
remove the
caps
on the ends
of
the unconnected wires or the terminals.
Connect the speaker wires correctly to the terminals
to
which they correspond. The unit may be damaged or
fail
to
work
if
you share the 8 wires or ground them to any metal
part
in
the car
When only
two
speakers
are
being connected to the
system, connect the connectors either to both the front
output
terminals or to both the
rear
output
terminals (do
not
mix front and
rear).
For
example, if you connect the
c:B
connector
of
the left speaker
to
a front
output
terminal,
do
not
connect the 8 connector to a
rear
output
terminal.
After the unit
is
installed, check whether the brake lamps,
blinkers, wipers, etc. on the car
are
working properly.
Mount
the unit
so
that the
mounting
angle
is
30°
or
less.
Do not
press
hard on the panel surface when installing the
unit to the vehicle. Otherwise
scars,
damage, or failure may
result.
This
unit
has
the cooling fan to decrease the internal
temperature. Do
not
mount
the unit
in
a place where the
cooling
fan
of
the unit
are
blocked. Blocking these openings
will inhibit the cooling
of
the internal temperature and
result
in
malfunction.
Cooling fan
100
Reception may drop if there
are
metal objects near the
Bluetooth antenna. (DNX6960/ DNX6160/ DNX6020EX/
DNX6460BT/ DDX616/ DDX6046BT only)
Bluetooth antenna
unit
& CAUTION
Install this unit in the console
of
your vehicle.
Do
not
touch the metal part
of
this unit during and
shortly after the
use
of
the unit. Metal part such
as
the heat sink and enclosure become hot.
English
I 3