Owner's Manual

Audio Control
Equalizer Control
You can set up the equalizer.
D Display the Equalizer screen
Touch [Ga] > [{l@J] > [Equalizer]. (page 59)
II Set each item
[SystemQ] Selects an equalizer curve type.
You can select any of the following equalizer
curves.
"Natural"l "Rock"j "Pop"l "Easy"l "Top40"1
"Jazz"l "User"
~
~
. "User":
Your own tone curve can be created. See <Tone
Setup> (page 60).
[SystemQ-EX] Selects items to be adjusted for
tone curve setup.
If selected "OFF", only Level can be set up for
tone
curves.
[Tone] Displays the Tone curve setup screen.
(page 60)
Tone Setup
You can set a Tone curve.
D Display the Equalizer screen
Touch [€I] > [~] > [Equalizer). (page 59)
D Display the Tone Control screen
"
To <e~
E!!!' ,.. Ridgeview Road 99.99'rn
-----_ ...
D Set the Tone
[Bass] Bass adjustment items are displayed.
[Middle] Middle adjustment items
are
displayed.
[Treble] Treble adjustment items are displayed.
[Flat]
Tone level becomes 0 (fiat).
[FREQ] Sets the Center frequency.
[Level] Sets the level.
[Q Factor] Sets the Q factor. (Only [Bass] and
[Middle] can be set)
[Bass DC EXT] Bass DC Extend settings. (Only
[Bass] can be set)
If turned "ON", it extends the bass center
frequency to the low register
by approximately
20%.
[SW Level] Adjusts the subwoofer volume.
The setting is available when subwoofer is set
to "ON". See <Speaker Setup> (page 75).
60 e DNX SERIES ONX6960/0NX6160/0NX6020EX/ONX6460BTjDNX5160