Owner's Manual

Setup Menu
iii Load the image
IT] Rotates the image.
~
• See <About Picture files> (page 6) for readable image
specifications.
•
The [Memory] button on the "Background" screen
becomes active only in STANDBY source mode.
• Pressing the [Memory] button on the "Background"
screen switches the AV OUT source to OFF.
For resetting the AV OUT source, refer to <AV Interface
Setup> section.
•
While loading the Background image, any other
operation
is prohibited.
Background Change
Selects a image for background.
D Select Background Change screen
B Select a image for background
IT] Returns to the initial background.
II Set the image as the background
r ,
C!
Panel Color Coordinate
Sets the button illumination color.
D Display the Color screen
Touch [e] > [:t--] >[Display] >[Color].
(page
62)
B Display the Panel Color Coordinate screen
[Initialize]
Initialization resets the settings
made using the
Panel Color to the default
settings made
at the factory.
[Panel Color Scan] When set to "ON", the
illumination color
of the buttons changes one
after another.
~
~
• When touching [SET] or [Initialize], make sure [Panel
Color Scan] is set to "OFF".
II Select a color
P e! Color Coordinate ~l AM
:H~P_8Gl:l'~ Ad,ust .'!-"'"
m .. RldgevlewRo_ad___ 99999.99,",
IT] Sets to the touched color.
[Adjust] Sets and registers favorite color to the
preset buttons ([Pl] -
[P3J).
68 DNX SERIES DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160