Owner's Manual

Setup Menu
Registering Bluetooth Unit
Registers the Bluetooth unit to be connected.
D Display the Bluetooth Setup screen
Touch [.J > [,....J >[Bluetooth SETUP].
(page 62)
II Display the Conned Device List screen
Q..
~
[A2DP Connect Device]
Only for DNX5160 and DDX516
with optional
Bluetooth unit KCA-BT200 connected.
II Search for a Bluetooth unit
lIJ Displays the registered Bluetooth units.
The busy service becomes active. The available
service becomes inactive.
[ ... ]
When ... appears, the text display is
scrolled by touching it.
[Search] Searches for a Bluetooth unit.
[SP DEV] Registers a Bluetooth unit that
cannot
be registered by normal register
(pairing) operation.
@2
• A new devicp cannot be registered if there are
already 5 Bluetooth units registered. Delete
unnecessary registration.
See <Bluetooth Unit
Connection> (page
72).
T II Select the Bluetooth unit to register
lIJ Displays the searched Bluetooth unit.
[Search] Searches for a Bluetooth unit.
[Cancel] Cancels searching of Bluetooth unit.
D Enter PIN code
lIJ Enters a code number using the keypad.
[Enter] Confirms the entered PIN code. Enter
the PIN code specified for the Bluetooth unit
you are registering.
This button will not be active until at least four
PIN code digits have been entered.
[Cancel] Cancels registration of PIN code.
[Clear] Clears the code number.
Q..
~
You can also register from the Bluetooth unit side. For
the PIN code necessary for registration, see <Registering
Bluetooth Unit
PIN Code> (page 71)
If the error message appears even though the PIN code is
correct, try <Registering Special Bluetooth Unit>.
• The screens used in this manual
are for models with
optional Bluetooth unit KCA-BT200 connected.
Models
with built-in Bluetooth function do not have
some buttons described in this manual.
70 DNX SERIES DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160