Owner's Manual

Setup Menu
Navigation Setup
You can set Navigation parameters.
D Display the Navigation Setup screen
Touch [eJ > [~J >[Navigation). (page 62)
II Set each item
[On Screen Navigation] Sets an on-screen
display of the navigation screen. ([:t.] "OFF")
(DDX series only)
"Auto": Information is displayed for 5 seconds
when updated.
"OFF": Information is not displayed.
~
~
[On Screen Navigation]
It can be set only when [Navigation Input] is set to "AV-
IN".
[NAV Interrupt Speaker] Selects speakers
used for voice gUidance of the navigation
system.
(~ "Front All")
"Front L": Uses the front left side speaker for
voice guidance.
"Front R": Uses the front right side speaker for
voice guidance.
"Front All": Uses both front speakers for voice
guidance.
[NAV Voice Volume] Adjusts the volume for
voice gUidance of the navigation system.
Ori DNX series: "25", DDX series: "21 ")
[NAV Mute] Mutes the volume during voice
gUidance of the navigation system.
(ll) "ON")
When turned "ON", the volume level drops for
voice guidance.
[Navigation Input] Selects a navigation
system connection.
(~ "RGB") (DDX series only)
"RGB": Allows the Kenwood's Navigation
System to connect via its interface
cable.
"AV-IN": Allows a third-party navigation system
to connect via the AV INPUT1 port.
"OFF": Must be used if no navigation system is
connected.
(The naVigation display is cancelled
when the AV source is SWitched.)
74 DNX SERIES DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160