DDX7015 DDX7045 MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL MONITEUR ET LECTEUR DVD INTEGRE MODE D’EMPLOI MONITOR CON RECEPTOR DVD MANUAL DE INSTRUCCIONES © PRINTED IN JAPAN B64-2841-00/00 (K)(AI)
Contents Before Use ..............................................................4 English About discs ............................................................6 Notes on playing MP3/WMA ................................7 DDX7015/7045 Basic operation ............................8 Basic Operations of Remote Controller ............10 Switch Screen Mode............................................12 Control during DVD Video or Video CD Playback............................................
Before Use 2WARNING English To prevent injury and/or fire, take the following precautions: • Ensure that the unit is securely installed. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery or ground wires, make sure to use automotive-grade wires or other wires with an area of 0.75mm2 (AWG18) or more to prevent cable deterioration and damage to the cable coating. • To prevent short circuits, never put or leave any metallic objects (e.g.
About discs Notes on playing MP3/WMA Removing discs • Don’t touch the recording surface of the disc. When removing discs from this unit pull them out horizontally. English Handling discs This unit can play MP3 (MPEG1, 2 Audio Layer 3)/WMA. Note, however, that the MP3/WMA recording media and formats acceptable are limited. When writing MP3/WMA, pay attention to the following restrictions. Discs that can’t be used • Discs that aren’t round can’t be used.
DDX7015/7045 Basic operation 1 Play Disc [Disc insertion slot] English A disc is played when you insert it. 2 Play/Pause [38] key 7 Track/Station Selectors [SEEK] key Selects a music or chapter, track, or frequency. 8 Attenuator/Loudness [ATT]/[LOUD] key Pauses and replays a disc. 3 Eject Disc [EJECT] key The disc is ejected. 4 Switch Video Sources [V.SEL] key The video sources are switched each time you press the key. Attenuates the volume. Press it again to cancel muting.
Basic Operations of Remote Controller 6 Joystick [DVD] [VCD] t [DISC] Select a folder or a disc. English Enters your selection from the DVD/VCD Disc Menu. 7 [DVD] [VCD] [TV] FM: Switches to TV1, TV2, or VIDEO. Returns to the previous screen when the DVD/VCD Disc Menu is used. [TUNER] FM: Switches to the FM1, FM2, or FM3 band. AM: Switches to the AM band. 8 [DVD] Calls the Top menu of DVD Disc Menu. 9 Switch Video Sources [V.SEL] key The video sources are switched each time you press the key.
Switch Screen Mode The Screen mode of the monitor changes each time the [MODE] key is pressed. English [MODE] key AUTO Full picture mode [FULL] Justify picture mode [JUST] Cinema picture mode [CINEMA] Zoom picture mode [ZOOM] Normal picture mode [NORMAL] • When the Menu, Easy Control screen, or Navigation is selected, it is shown in the full-size display mode automatically. Their Screen mode cannot be changed. • The Screen mode can be set for each of DVD/VCD, TV, and video images.
Control during DVD Video or Video CD Playback Control during DVD Video or Video CD Playback English Various control screens appear when you play back a DVD Video (DVD) or a Video Displaying the DVD/VCD Playback screen Displaying the Easy Control Panel 1 Title Number Display You can use the following operations when displaying DVD/VCD images. 2 Chapter Number Display Plays back the DVD or VCD.
Control during DVD Video or Video CD Playback English Displaying the DVD/VCD Control screen i Ejects the disc from the built-in disc player. Plays a DVD/VCD using various functions. o Calls the Sound Effects Menu. (see page 84) ; Calls the Setup Menu. (see page 57) a Displays the Source Select screen. (see page 55) s Fast Forwards or Rewinds.
Control during DVD Video or Video CD Playback DVD Disc Menu 2 Select Disc Menu options English Selects an option from the DVD Disc Menu. Disc Menu 1 Displays the Disc Menu Control screen VCD Zoom Control Direct Search Displays an enlarged VCD screen. You can search for a DVD/VCD chapter, scene or track by entering its number.
Tuner Control Tuner Control English Various control screens appear in the Tuner Source mode. Displaying the Easy Control Panel Displaying the Tuner Control screen The Tuner Control Panel is displayed in a floating position of the selected picture. 1 Switches the source. 5 Calls the Tuner Menu. You can tune in a station using various functions. 2 Switches the band (to AM or FM1/2/3). 6 Calls the Sound Effects Menu. (see page 84) 3 Tunes in a station 7 Displays the Source Select screen.
Tuner Control English Seek Mode Manual Memory Preset Select Set Station Name Sets a station selection. Stores the current receiving station in memory. Lists and tunes in stations in memory one after the other. Names a station. 1 Select a station you wish to store in memory SEEK SEEK is not shown, touch FM AM FM If 1 Tune in a station you wish to name 1 Call the Tuner Menu . Next AM Menu The mode is switched each time you touch the button.
Tuner Control English Direct Search Traffic Information Search for Program Type Radio Text Tunes in a station when its frequency is entered. When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. A program is tuned when you set its program type. You can display the radio text. 1 Select a band 1 1 Call the Tuner Menu Call the Tuner Menu When the traffic bulletin starts... Menu The Traffic Information screen appears automatically.
CD/MP3/WMA/WMA/Disc Changer Play Control CD/MP3/WMA/WMA/Disc Changer Play Control English You can call various control screens during CD/MP3/WMA/WMA/Disc Changer Displaying the Easy Control Panel The CD/MP3/WMA/Disc Changer Play Control Panel is displayed in a floating position of the selected picture. playback. Displaying the CD/MP3/WMA/ Disc Changer Control screen 1 Switches the source. 2 Stops to play the built-in disc player. You can play the CD/MP3/WMA/disc changer using various functions.
CD/MP3/WMA/Disc Changer Play Control English MP3/WMA Control screen Disc Changer/CD player Control screen During play by the disc changer During MP3/WMA play DVD MP3/WMA27 Menu Audio 32 + 31 30 Set Up Direct SRC 28 38 33 SCN Next 32 34 PEP ¡ 3 KENWOOD 43 REP 39 36 IN 37 SCRL DISP P j Calls the MP3/WMA Menu. 30 28 35 RDM 1 40 FREP 1 3 : 5290 0 : 0 0 : 3 8 41 CD- CH Set Up l Stops to play. When pressed twice, the disc is played back from its beginning in the next time.
CD/MP3/WMA/Disc Changer Play Control Set Disc Name English Names a CD. 1 Play a CD you wish to name Displaying the CD/MP3/WMA/ Disc Changer Menu screen You can select menu options using various functions. 2 Call the CD/Disc Changer Menu The directory of an MP3/WMA disc are listed for quick search. 1 Call the MP3/WMA Menu Selects options from various function menus. Returns to the CD/MP3/WMA/Disc Changer Control screen.
CD/MP3/WMA/Disc Changer Play Control Mute Telephone English ID3/WMA TAG Display (during MP3/WMA play) Disc Select (during play by disc changer) The ID3/WMA TAG information of MP3/WMA file is listed. The discs loaded on the disc changer are listed for quick disc selection. 1 Call the MP3/WMA Menu 1 Calls the Disc Changer Menu Menu Direct Search Mute Telephone Searches for a disc or a song when its number is entered. When the telephone is called, the system is paused automatically.
TV Control TV Control (with the optional accessory TV Tuner connected only) English Various control screens appear in the TV Source mode. Displaying the TV Picture screen Displaying the TV Control screen Various control screens appear in the TV Source mode. Selects the TV Pictures. TV Picture screen Preset 3 2 3 2ch MODE: F U L L AV-OUT: AV - I N 4 6 TV1 1 5 1 TV Band Number Display You can tune in a TV station using various functions. r Calls the Sound Effects Menu.
TV Control English Seek Mode Manual Memory Set Station Name Direct Search Sets a TV station selection. Stores the current receiving channel in memory. Names a station. Tunes in a station when its channel number is entered. SEEK 1 Select a station you wish to name 1 Select a channel you wish to store in memory 1 Selects the Direct Search mode TV If SEEK is not shown, touch TV . Next The mode is switched each time you touch the button.
SIRIUS Tuner Control SIRIUS Tuner Control (with the optional accessory SIRIUS Tuner connected only) English Various control screens appear in the SIRIUS Tuner source mode. Displaying the Easy Control Panel Displaying the SIRIUS Tuner Control screen The SIRIUS Tuner Control Panel is displayed in a floating position of the selected picture. 1 Switches the source. 5 Calls the SIRIUS Tuner Menu. 2 Switches the band. 6 Calls the Sound Effects Menu.
SIRIUS Tuner Control Channel Search 3 Select a category English The categories and channels are listed for your channel selection. cat.HITS 0 etc. Direct Channel Search Information Display A channel is tuned when you enter its number. The tuned program information is displayed. 1 Call the SIRIUS Tuner Menu 1 Call the SIRIUS Tuner Menu Menu Menu 1 Call the SIRIUS Tuner Menu The channel list of the selected category appears. Menu Channel Selection screen 1 2 Display the Information screen CH.
HD Radio Control HD Radio Control (with the optional accessory HD Radio tuner connected only) English Various control screens appear in the HD Radio Source mode. Displaying the Easy Control Panel Displaying the HD Radio Control screen The HD Radio Control Panel is displayed in a floating position of the selected picture. 1 Switches the source. 5 Calls the HD Radio Menu. You can tune in a station using various functions. 2 Switches the band (HD FM1/2/3, HD AM).
HD Radio Control English Seek Mode Manual Memory Receive Mode Title Display Sets a station selection. Stores the current receiving station in memory. The digital or analog program is selected and received. An information about the received song is displayed. 1 Select a station you wish to store in memory SEEK 1 Call the HD Radio Menu If SEEK is not shown, touch . Next The mode is switched each time you touch the button.
DAB Tuner control DAB Tuner control (with the optional accessory DAB tuner connected only) English Various control screens appear in the DAB Tuner source mode. Displaying the Easy Control Panel Displaying the DAB Tuner Control screen The DAB Tuner Control Panel is displayed in a floating position of the selected picture. 2 Switches the band (to DAB1/2/3) AV-OUT: AV - I N You can select the Ensemble and services using various functions.
DAB Tuner control English Seek Mode Service Preset Memory Service Select Language Filter A service selection method can be set. The current receiving service is stored in memory. The service list of the currently receiving ensemble is displayed for your selection. The languages are list for your selection. SEEK If SEEK 1 Select a service you wish to store in memory is not shown, touch Menu Band . Next The mode display is switched each time you touch the button.
DAB Tuner control Search for Program Type Select a Language English The services are received when you set its program type. Display the Language select screen DAB Information DAB Announcement The DAB information is displayed. When the Announcement you have turned on starts, any source is switched to the Announcement automatically. 1 Call the DAB Tuner Menu 1 Call the DAB Tuner Menu LANG When the announcement starts... Menu The Announcement screen appears automatically.
Weather Band Tuner Control Weather Band Tuner Control (with the optional accessory Weather Band Tuner connected only) English Various control screens appear in the Weather Band Tuner source mode. Displaying the Easy Control Panel The Weather Band Tuner Control Panel is displayed in a floating position of the selected picture. Displaying the Weather Band Tuner Control screen 1 Switches the source. 3 Calls the Sound Effects Menu. (see page 84) 2 Tunes in a station. 4 Displays the Source Select screen.
Character Entry Source Select English How To Use the Character Entry screen Source Select The source you wish to listen to can be selected quickly. When you select the Set Disc Name mode or others, the following screen appears for character entry. Displaying the Control screen Character Entry screen 1 1 KENWOOD 3 4 4 2 a b c d e f g h i j k l m n t u o p q r s v w x y z Space Ok Press this key several times unit the Control screen appears.
Adjusting the Monitor Display Position and Quality Setup Menu English Adjusting the Monitor Display Position and Quality Setup Menu You can adjust the position and picture quality of the monitor. You can set up various receiver parameters. Displaying the Screen Control screen Displaying the Control screen 1 Brightness Control Disabled if the Auto Dimmer is On. You can adjust the picture quality using the following keys.
Setup Menu English Audio Set Up Crossover Network Setup You can setup a speaker network, etc. You can set a crossover frequency of speakers. X ' Ov e r Displaying the Audio Set Up screen 1 Returns to the Control screen of the previous source. Au d i o S e t Up 2 Calls the Sound Effects Menu. (see page 84) 3 Calls the Setup Menu. Speaker setup screen 3 Audio 2 Set Up SRC 1 5 Menu 4 Displays the X'Over setup screen.
Setup Menu Audio Set Up (with the optional accessory DSP unit connected only) English You can set up more detailed settings by connecting the optional accessory DSP Displaying the Car Type Set Up screen If your vehicle type is selected, the Digital Time Alignment is set automatically (for timing adjustment of sound output for each channel) to have the highest surround effects. Au d i o S e t 2 Set Up Menu 4 Car SRC Up 1 Returns to the Control screen of the previous source.
Setup Menu English Channel Level DTA Setup Set the volume at each setup position. Manually set the sound output timing of each channel. 1 Select a speaker you wish to adjust 3 Set a delay time 1 Display the DTA Setup screen The speakers are virtually moved to the desired distance. When the values of front speakers increase, they are virtually moved forward. When the values of rear speakers and subwoofer increase, they are virtually moved backward.
Setup Menu English High Pass Filter Setup Low Pass Filter Setup You can manually set a High Pass Filter of Crossover Network. You can manually set a Low Pass Filter of Crossover Network. X ' Ov e r HPF HPF F r o n t (P61 7) X ' Ov e r LPF (P61 8) 1 1 HPF R e a r 100 Hz 1 100 Hz 1 3 100 Hz 3 5 100 Hz 6 2 2 3 2 2 4 4 6 5 7 1 Sets a crossover frequency of Front High Pass Filter. 2 Sets a crossover slope of Front High Pass Filter.
Setup Menu DVD Setup English You can set up the DVD play. Displaying the DVD SETUP 1 screen Displaying the DVD SETUP 2 screen 9 Sets an angle mark display. ( 1 Returns to the Control screen of the previous source. DVD SETUP 2 Calls the Sound Effects Menu. (see page 84) 3 Calls the Setup Menu. DVD SETUP 1 screen Audio 2 Set Up SRC 1 Menu 4 Selects a disc menu language.
Setup Menu Language Setup English Abbreviation Select a language you use for the speech and menus. 1 Display the Language Setup screen See (see page 66) and select a language you wish to use. Audio LANG c en d 1 a 4 4 3 b e f g h i j k l m n o p q r s t u v w x y z C l e ar 2 Can c e l ORIGN Enter 5 1 Enters a language code. 2 Cancels the language setup and returns to the DVD SETUP 1 screen. 3 Clears the language code.
Setup Menu System Setup English You can set up the system parameters. Displaying the System Set Up 1 screen Displaying the System Set Up 2 screen 8 Selects an illumination color of receiver keys. ( Red) "Green": Green "Red": Red 1 Returns to the Control screen of the previous source. S y s t em S e t U p 2 Calls the Sound Effects Menu. (see page 84) 3 Calls the Setup Menu. System Set Up 1 screen 3 Audio 2 Set Up SRC Menu 4 Turns the key touch tone On or Off.
Setup Menu AV Interface English You can set audio and visual (AV) interface parameters. Displaying the AV I/F 1 screen Displaying the AV I/F 2 screen 1 Returns to the Control screen of the previous source. AV I / F Set Up 8 Selects an AV source to be output at the AV OUTPUT port. ( AV-IN) If you select DVD as a source when the optional accessory DSP unit is connected, no DVD sound is output to the AV output port. 2 Calls the Sound Effects Menu. (see page 84) 3 Calls the Setup Menu.
Setup Menu User Interface English You can set up user interface (IF) parameters. Displaying the User I/F 1 screen Displaying the User I/F 2 screen 6 Sets an on-screen display of the DVD playback screen. ( MANU) If you set to "Auto", an information is displayed for 5 seconds when updated. 7 Sets an on-screen display of the navigation screen. ( Auto) If you set to "Auto", an information is displayed for 5 seconds when updated. 1 Returns to the Control screen of the previous source.
Setup Menu English Touch Panel Adjust Clock You can adjust the touch panel operations. Adjusts the clock time 1 Display the Touch Panel Adjust screen 1 Display the Clock Screen Ad j ust If Ad j ust is not shown, touch Ad j ust or If or 3 Audio 2 Menu 3 To u c h A d j u s t 4 Set Set Up SRC is not shown, touch Ad j ust to display it. Audio to display it.
Setup Menu Security Code Setup English If you have pressed the Reset button or if you have disconnected the Receiver from battery... 2 Start the security code registration You can set a security code to protect your receiver system against theft. When the Security Code function is activated, the code can't be changed and the function can't be released. Note, the Security Code can be set as the 4 digit number of your choice.
Setup Menu SIRIUS Setup (with the optional accessory SIRIUS Tuner connected only) English You can display the SIRIUS ID. Displaying the SIRIUS Set Up screen 1 Returns to the Control screen of the previous source. SIRIUS Set Up 2 Calls the Sound Effects Menu. (see page 84) 3 Calls the Setup Menu. SIRIUS Set Up screen 3 Audio 1 Set Up SRC Menu SIR I US I D 1 2 3 4 5 6 7 8 9 0 12 4 Displays the SIRIUS ID If 4 SIRIUS Set Up touch or is not shown, to display it.
Setup Menu English DAB Set Up (with the optional accessory DAB Tuner connected only) Announcement Selection The DAB reception can be set. Various announcement reception parameters can be set. Displaying the DAB Set Up screen 1 Displays the Announcement Selection screen 1 Calls the Sound Effects Menu. (see page 84) Set 2 Returns to the Control screen of the previous source. DA B S e t U p Anoncemen t 3 Calls the Setup Menu.
Sound Effects Menu English Sound Effects Menu Audio Control You can set up the receiver sound effects. You can adjust the front and rear and right and left audio balance. Displaying the Control screen Displaying the Audio Control 1 screen 1 Returns to the Control screen of the previous source. Au d i o Co n t r o l 2 Calls the Setup Menu. (see page 57) Control screen 3 Calls the Sound Effects Menu.
Sound Effects Menu English Equalizer Tone curve setup You can set up the equalizer. You can set a Tone curve. 5 Set a Q factor Q factor 1 Display the Tone setup screen Displaying the Equalizer screen You can set it up only when Bass or Middle is adjusted. To n e 1 Returns to the Control screen of the previous source. Equa l i z e r 2 Calls the Setup Menu. (see page 57) 3 Calls the Sound Effects Menu.
Sound Effects Menu Parametric Equalizer 5 Set a Q value English You can Manually set the equalizer curve by adjusting the center frequency, gain and Q value. (with the optional accessory DSP unit connected only) Store or call the equalizer curve into/from memory 1 Display the Parametric Equalizer screen To store the equalizer curve in memory: P-EQ — P1 P aramet r i c 1 2 Band1 Hz 800 dB +12 3. 0 0 Band2 Hz 800 dB +12 Equ a l i z e r 3 Band3 KHz 2.25 dB +12 Band4 KHz 2.25 dB +12 3. 0 0 3.
Sound Effects Menu English Zone Control Digital Effect (with the optional accessory DSP unit connected only) You can set the front and rear audio source. You can set up the Digital Effect. Displaying the Zone Control screen Displaying the Digital Effect screen 1 Returns to the Control screen of the previous source. 1 Returns to the Control screen of the previous source. 2 Calls the Setup Menu. (see page 57) Zone C on t r o l Digital E f f e c t 2 Calls the Setup Menu.
Sound Effects Menu Position (with the optional accessory DSP unit connected only) English You can adjust the sound effects according to your listening position. Displaying the Position screen 1 Returns to the Control screen of the previous source. 2 Calls the Setup Menu. (see page 57) Po s i t io n 3 Calls the Sound Effects Menu. 4 Sets a listening position. You can select any of "Front R" (Right front), "Front L" (Left front), "Front" (All front), "Rear" (All rear) and "ALL" (All) positions.
Glossary DVD: Digital Versatile Disc English A type of disc which contains recording of audio/video packaged media with high video and audio quality, such as a movie, featuring large recording capacity and digital signal processing capability. Troubleshooting Guide Title number (DVD) The title is the largest unit of video and audio recorded in a DVD. It usually corresponds to a single movie of video software or an album (sometimes a piece of music) of music software.
Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. English • Attenuator is turned on. • The fader or balance settings are set all the way to one side. • The input/output wires or wiring harness are connected incorrectly. ■ General The power does not turn on. • The fuse has blown.
Troubleshooting Guide The viewing angle cannot be changed. English • The DVD disc being played does not contain the recording of more than one angle. • You are attempting to switch the angle in a DVD section where more than one angle is not recorded. ■ MP3/WMA source • The viewing angle cannot be changed when the DVD disc being played does not contain the recording of more than one angle. • More than one viewing angle may be recorded only in limited sections in a disc.
Specifications 2CAUTION Specifications subject to change without notice. English Monitor Section Picture size ..........................................6.95 inches (diagonal) wide 154.1(W)×87.1(H)mm Display system......................................Transparent TN LCD panel Drive system ..........................................TFT active matrix system Number of pixels ................................336,960 (480H×234V×RGB) Effective pixels ...............................................................
