MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL DDX7025

Setup Menu
AV Interface
You can set audio and visual (AV) interface parameters.
Displaying the AV I/F 1 screen
AV I/F 1 screen
AV I /F Set Up
1
Returns to the Control screen of the previous
source.
2
Calls the Sound Effects Menu. (see page 76)
3
Calls the Setup Menu.
4
Selects a navigation system connection. ( RGB)
"RGB"
:
Allows the Kenwood’s Navigation System
to connect via its interface cable.
"AV-IN": Allows a third-party navigation system to
connect via the AV INPUT port.
"OFF"
:
Must be used if no navigation system is
connected. (The navigation display is
cancelled when the AV source is switched.)
5
Sets a name to be displayed when you select a
system that is connected via the AV INPUT port.
( VIDEO)
If you have set the navigation system connection to
"AV-IN", the display is fixed to "NAV".
6
Sets an image display of the system that is
connected via the AV INPUT port. ( Normal)
"Normal"
:
When the image source is switched, an
image entered via the AV INPUT port is
displayed.
"AUTO": When an image signal is entered via the
AV INPUT port, this image is displayed.
7
Sets how the rear camera image is displayed.
"Reverse": Displays with left and right reversed.
"Normal": Displays as it is.
"R-CAM View" can be set only when "AV-IN Name"
is set to "R-CAM".
8
Displays the AV I/F 2 screen.
If is not shown,
touch or to display it.
AV I /F Set Up
English
62 English
Menu
AV I/F 1
Norma l
VIDEO
AV - I N
NAV
AV- I N Name
AV- I N
Norma l
R-CAM View
Set Up
SRC
Audio
1
4
4
8
5
5
6
7
3
2
DDX7025_E(En)v3.6 04.4.18 5:16 PM ページ62