Operation Manual

ENGLISH 65
A lot of noise is generated.
Turn off (uncheck) “VoiceOver” on the iPod/
iPhone. For details, visit <http://www.apple.com>.
No operations are available when playing back a
track containing Artwork.
Operate the unit after the Artwork is loaded.
Videos cannot be played.
Connect with USB Audio and Video cable
KCA-iP202 for iPod/iPhone except for iPhone
5/iPod touch (5th Generation)/iPod nano (7th
Generation) or KCA-HD100 and USB2.0 cable
through Lightning-Digital AV adapter for iPhone
5/iPod touch (5th Generation)/iPod nano (7th
Generation) . Other cables cannot be used.
No sound of videos comes out.
Connect with USB Audio and Video cable
KCA-iP202 for iPod/iPhone except for iPhone
5/iPod touch (5th Generation)/iPod nano (7th
Generation) or KCA-HD100 and USB2.0 cable
through Lightning-Digital AV adapter for iPhone
5/iPod touch (5th Generation)/iPod nano (7th
Generation). Other cables cannot be used.
Tuner
AME automatic presetting does not work.
Store stations manually. (Page 21 )
Static noise while listening to the radio.
Connect the aerial firmly.
Digital Radio (DAB)
Cannot receive an ensemble.
Your area is not covered by the ensemble.
The DAB aerial is not properly extended or
positioned.
Adjust the aerial and try the ensemble scanning
again.
Connect an active antenna (not supplied).
AV-IN1/AV-IN2
No picture appears on the screen.
Turn on the video component if it is not on.
Connect the video component correctly.
Bluetooth
Phone sound quality is poor.
Reduce the distance between the unit and the
Bluetooth mobile phone.
Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped while using a
Bluetooth audio player.
Reduce the distance between the unit and the
Bluetooth audio player.
Disconnect the device connected for Bluetooth
phone.
Turn off, then turn on the unit.
(When the sound is not yet restored) connect the
player again.
The connected audio player cannot be
controlled.
Check whether the connected audio player
supports AVRCP (Audio Video Remote Control
Profile).
Bluetooth device does not detect the unit.
Search from the Bluetooth device again.
REFERENCES
DDX_Mid_E.indb 65 2014/01/23 19:50