Owner's Manual

HD Radio™ tuner
HD Radio™ tuner
8
[S]/[T]
Searches for a station.
• The search method differs according
to the selected seek mode (see
page 20).
[CH
K]/
[CH
J]
Selects a sub-channel when receiving
an HD Radio multicast channel.
Selecting a station/channel by specifying
frequency/channel number—Direct Search
You can search for a station by entering the desired
frequency or channel number.
1 Display the <10Key Direct> screen.
On the source control screen, touch as follows:
2 Select a search method ([FREQ]: by
frequency/[CH]: by channel) (
1), enter the
frequency or channel number (
2), then
start searching (
3).
• Touch [BS] to delete the last entry.
Storing preset stations in the memory
You can preset 15 stations for FM and 5 stations for
AM.
Automatic presetting — AME (Auto
Memory)
1 Select the band.
On the source control screen, touch as follows:
2 Start automatic presetting.
A confirmation message appears. Touch [Yes].
The local stations with the strongest signals are
found and stored automatically.
Manual presetting
1 Select the band, then tune in to a station
you want to store.
• See “Playback information on the source control
screen” on page 20 for details.
2 Display the preset list.
On the source control screen, touch as follows:
3 Select a preset number to store into.
(Hold)
The station selected in step 1 is stored into the
preset number you have selected.
To hide the preset list: Touch [
] on the preset list.
21
ENGLISH
ENDDX2018TCKR.indb21 2017/11/3015:35