Owner's Manual

Radio
Radio
4 Text information
• Touching [<] scrolls the text if not all of the text
is shown.
• Touching [
] switches the information (e.g.
frequency, PS name, Radio Text, title, artist, etc.).
−The availability of the information vary
depending on the reception, selected station.
5 Preset list
6 Selects the band (AM/FM)
7 Operation keys*
8 Indicators
• TI: Lights up in white when receiving the traffic
information, and lights in orange when being
standby for Traffic Information Reception.
• ST: Lights up when receiving stereo broadcast.
• MONO: Lights up when receiving stations in
monaural forcibly.
* See the following “Operation keys on source control screen”.
Operation keys on source control screen
• The appearance of the operation keys may differ,
however the similar operation keys have the same
operations.
• See also “Common operation keys on source control
screen” on page 11.
Touching the operation keys performs the following
actions:
1
[TI]* (For FM RBDS features)
Activates TI standby reception mode.
• When TI is activated, the unit is ready
to switch to traffic information if
available. The TI indicator lights up in
white.
• If the TI indicator lights up in orange,
tune into a station providing Radio
Broadcast Data System signals.
• The volume adjustment for traffic
information is automatically
memorized. The next time the unit
switches to traffic information, the
volume is set to the memorized level.
• To deactivate, touch [TI] again.
[MONO]* Activates monaural mode for better FM
reception (stereo effect will be lost).
• The MONO indicator lights up while
monaural mode is activated.
• To deactivate, touch [MONO] again.
[PTY]* (For FM RBDS features)
Enters PTY search mode.
1 Touch a PTY code.
2 Touch [Search] to search for.
If there is a station broadcasting a
program of the same PTY code as you
have selected, that station is tuned in.
[AME]
Presets stations automatically.
7
[S]/[T]
Searches for a station.
• The search method differs according
to the selected seek mode.
* Appears only when FM is selected as the source.
Storing preset stations in the memory
You can preset 15 stations for FM and 5 stations for
AM.
Automatic presetting — AME (Auto
Memory)
On the source control screen, touch as follows:
A confirmation message appears. Touch [Yes].
The local stations with the strongest signals are found
and stored automatically.
23
ENGLISH
ENDDX2018TCKR.indb23 2017/11/3015:35