Owner's Manual

Basic Operations
Basic Operations
Adjusting the volume
DDX5018BT DDX718WBTL
DMX718WBTL
DDX795
DDX775BH
DDX6018BT
DMX6018BT
You can adjust the volume (00 to 40) by pressing J to
increase and pressing
K to decrease.
• Holding
J increases the volume continuously to
level 15.
DDX595/DDX575BT
You can adjust the volume (00 to 40) by turning
the knob to the right to increase and to the left to
decrease.
Attenuating the sound
(Only for DDX795/DDX775BH/DDX595/DDX575BT/
DDX6018BT/DMX6018BT/DDX718WBTL/
DMX718WBTL)
DDX595
DDX575BT
DDX718WBTL
DMX718WBTL
DDX795
DDX775BH
DDX6018BT
DMX6018BT
(Hold)(Hold)(Hold)
The ATT indicator lights up.
To cancel attenuation: Press and hold the same
button again.
Monitor panel operations
(Only for DDX795/DDX775BH/DDX6018BT/
DMX6018BT/DDX718WBTL/DMX718WBTL)
1 Display the <Angle Adjust> screen.
DDX718WBTLDDX795
DDX775BH
DDX6018BT
DMX6018BT/DMX718WBTL
Press MENU on the monitor panel to display the
pop-up short-cut menu, then touch [Angle].
2 Perform the adjustment or operation.
E.g. Angle adjust screen for DDX795
[0] – [6] Selects a monitor angle.
(The monitor panel will stay in
this angle when you turn on
the unit.)
<Off Position> Sets the angle of the monitor
panel you want when you
turn off the unit or the ignition
switch of the vehicle.
• Select the monitor angle,
then touch [Memory].
[
M DISC EJECT]
(Only for DDX795/DDX775BH/
DDX6018BT/DDX718WBTL)
(Touch) Ejects the disc.
To return the monitor panel to
the selected angle:
Press
M on the monitor panel.
• To return to the previous screen, touch [
] on the
setting screen.
6
ENGLISH
ENDDX2018TCKR.indb6 2017/11/3015:34