GPS NAVIGATION SYSTEM DNX9140 DDX814 DDX8034BT MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System/DVD Receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Contents How to read this manual Before Use Notes 4 6 7 Initial Setup 97 Radio Listening 30 Functions of the buttons on the front panel 10 Picture in Picture Function Screen Switching Function Getting Started How to Display the Navigation Screen How to Select the Source How to Set a Medium / a Device Basic Operation How to Display the Source Control Screen How to Display Top Menu Screen Operation on the Playback Screen of Visual Sources How to Display the Easy Control Screen 11 11 12 12 12 13 14
Voice Control (DNX9140 only) Voice Control Other Functions 47 47 48 Character Entry 48 External Device Power Supply Control 48 Muting Audio Volume upon Reception of Phone Call 49 Screen Control 50 Screen Control 50 Hands Free Unit Control Before Use Downloading the Phonebook Receiving a Call During a Call Call Waiting Making a Call Calling by Phonebook Calling by Entering a Phone Number Making a Call Using Call Records Calling by Voice Recognition (DDX814/ DDX8034BT) Controlling Tone-based Services
How to read this manual This manual uses illustrations to explain its operations. Source Control Screen The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. Switches to the source control screen to use various functions. 1 Display the Source Control Screen See .
Function Icon Icons representing available functions are shown below. DEO DEO EO : Function of DVD-VIDEO playback. -VVR : Function of DVD-VR playback. -VR o CD : Function of Video CD playback. oCD : Function of CD (CD-DA) playback. : Function of Audio File playback. : Function of MPEG file playback. : Function of DivX file playback. : Function of JPEG file playback. : Function of Disc (DVD, CD) media. : Function of USB device. : Function of FM reception. : Function of SIRIUS source. : Function of XM source.
Before Use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. How to reset your unit • If the unit or the connected unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.
Notes About Audio files List of playable discs Disc types DVD CD Others Standard Support DVD Video DVD Audio DVD-VR DVD-R ‡ × ‡ ‡ DVD-RW ‡ DVD+R ‡ DVD+RW ‡ DVD-R DL (Dual layer) DVD+R DL (Double layer) DVD-RAM Music CD ‡ ‡ × ‡ CD-ROM ‡ CD-R ‡ CD-RW ‡ DTS-CD Video CD (VCD) Super video CD Photo CD CD-EXTRA ‡ ‡ × × % HDCD % CCCD Dualdisc Super audio CD × × % Remark Not compatible with CPRM.
Notes About Picture files • Acceptable picture files JPEG • Extensions jpg, jpeg • Acceptable media CD-R/RW/ROM, DVD±R/RW, mass-storage-class USB device Acceptable discs, disc formats, USB device file system, file and folder names and playing order are the same as those for audio files. See .
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 6 1 2 3 1 4 5 2 4 DVD disc marks Operation regulatory marks Symbol With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual.
Functions of the buttons on the front panel For DDX814/ DDX8034BT TOP ATT VOLUME AUD NAV SRC A B C D E TEL F G Reset button (page 6) SI indicator (page 70) Remote control sensor 1 sec. : Press for more than 1 second A Attenuation of the volume On/Off. 1 sec. Keep the tag data of the currently listening music of HD Radio. t B Volume adjustment. C Displays Graphic Equalizer screen.*1 „ 1 sec. Rear view display On/Off.*2 D DNX9140 Displays the navigation screen.
Functions of the buttons on the front panel F DNX9140 Hands Free control On/Off. 1 sec. 7 While watching the playback screen of a visual source Displays the Easy Control screen. & 7 While watching the navigation screen Displays the Screen Control screen. p 7 While watching the screen other than the above Screen Switching function On/Off. ! DDX814/ DDX8034BT Hands Free control On/Off. 1 sec. 7 While watching the playback screen of a visual source or the navigation screen Displays the Easy Control buttons.
Getting Started How to Display the Navigation Screen How to Select the Source DNX9140 Sources can be selected from the Source Select screen. Source Select screen NAV The navigation screen appears. DDX814/ DDX8034BT TOP SRC The Source Select screen appears. Touch the icon of the source. Use or to turn the page. For how to operate each source, see the following pages. The navigation screen appears. • For how to set up and use the navigation function, see the Navigation Instruction Manual.
Getting Started How to Set a Medium / a Device 7 Disc media 7 SD card (DNX9140 only) This SD card slot is used to upgrade the Navigation System. For how to upgrade the Navigation System, refer to the instruction manual of the navigation system. 0 Press the [0] button to open/close the front panel. If a disc is already inserted, it is ejected by pressing the [0] button. 7 iPod Press the [0] button for more than 1 second to open the front panel.
Basic Operation How to Display the Source Control Screen DDX814/ DDX8034BT On the Source Control screen you can find all the control buttons for the selected source. TOP Source Control Screen • For how to use each button, see the operation pages of each source. How to display the Source Control screen The Source Control Screen appears. DNX9140 While watching the navigation screen DNX9140/DDX814/ DDX8034BT While watching the Easy Control Screen TEL 1 sec. The Source Control Screen appears.
Basic Operation How to Display Top Menu Screen Top Menu Screen is the entrance to all the functions. You can enter source operation screen as well as various setup menu from this screen. Top Menu screen How to display the Top Menu screen Buttons on the Top Menu screen V ] Switches to the navigation screen. [NAV ] Switches to the source control screen [SRC of the selected source. [TEL ] Switches to the Hands Free Main screen. [NAV SETUP] Displays Navigation SETUP screen.
Basic Operation Operation on the Playback Screen of Visual Sources How to display the playback screen SRC While watching visual sources, basic operation is possible by touching the screen. The screen has 4 function areas. The function of each area is different depending on the sources. (Some areas are unavailable for some sources.) Playback screen of a visual source The Source Select screen appears. Touch the icon of the source. 2 1 3 The Playback screen of a visual source appears.
Basic Operation How to Display the Easy Control Screen Basic operation buttons of the selected source can be displayed on the playback screen of visual sources so that you can control the source without switching the screen. Easy Control Screen Buttons on the Easy Control Screen [∞] Changes the function as follows by touching the [∞] button. [SCRN] Displays Screen Control screen (page 50). [TEL] Switches to the Hands Free Main screen (page 52). [EXT SW] Switches to the EXT SW Control screen (page 48).
Watching DVD/Video CD You can play DVD/Video CD using various functions. • Set the remote controller mode switch to "DVD" mode before starting operation, see (page 91). Playback Screen Easy Control Screen Basic functions are available even when the playback screen is displayed. Displays the basic operation buttons on the screen. 1 Display the Playback Screen 1 Display the Easy Control Screen See (page 16).
Video CD Multi Function 1 [ ] Closes the multi function bar. DVD-VIDEO [38] Plays or pauses. [7] Stops playing. When touched twice, the disc is played from its beginning when you play it the next time. [0] Ejects a disc. [1], [¡] Fast Forwards or Fast Backwards. [4], [¢] DVD-VIDEO Searches for a chapter. DVD-VR Searches for a chapter. Video CD Selects a scene (when PBC is On) or a track (when PBC is Off ). [ ], [ ] DVD-VIDEO , DVD-VR Slow Forwards or Backwards. [ ] Switches to the playback screen.
Watching DVD/Video CD DVD-VIDEO Disc Menu Selects an option from the DVD-VIDEO Disc Menu. 1 Display the Playback Screen See (page 16). 2 Display the Menu Control 1 screen ⁄ • To cancel Highlight Control, press the [TEL] button for more than 1 second. • The Highlight Control is cleared automatically after approximately 10 seconds. 5 Operation on the Menu Control 2 screen 3 Operation on the Menu Control 1 screen [Menu] Calls the Menu.
[2], [3], [5], [∞] Scrolls the screen in the direction you touch. [Return] Returns to the previous screen. [Exit] Exits the Zoom Control screen. DVD-VR Menu Control [Zoom] Changes the zoom ratio at 4 levels (2 times, 3 times, 4 times, or off ) each time you touch. [2], [3], [5], [∞] Scrolls the screen in the direction you touch. [Return] Returns to the previous screen. [Exit] Exits the Zoom Control screen. Selects an option from the DVD-VR Disc Menu.
Music Disc/ Audio File Listening & Video File/ Picture File Watching You can recall various control screens during playback of CD, audio file, video file and picture file. • See (page 7) for playable discs. • See (page 7), (page 7) or (page 8) for playable files. Source Control Screen Switches to the source control screen to use various playback functions.
[4Line]/ [2Line] Switches the number of lines displayed in the Information Display. [FOLD]/ [Flist] Displays the folder list. [Plist] Audio File in USB Displays the play list. [SLIDE] Displays images in the folder currently being played one after another. If there is no image in the folder currently being played, initial background is displayed. For information on setting the image display time, see (page 86) or (page 86).
Music Disc/ Audio File Listening & Video File/ Picture File Watching Scrolls to the position of the specified initial USB device select Selects the connected USB device (or a partition). 1 Display the Source Control Screen See
Link search (Audio file in USB) Playback Screen (Video file, Picture file) Searches for another song of the currently selected artist. Basic functions are available even when the playback screen is displayed. 1 Display the Source Control Screen 1 Display the Playback Screen See
Music Disc/ Audio File Listening & Video File/ Picture File Watching Easy Control Screen (Video file, Picture file) Displays the basic operation buttons on the screen. [ ] ] [ ] [ [Exit] Reverses the picture horizontally. Rotates counter clockwise. Rotates clockwise. Ends Picture Control. 1 Display the Easy Control Screen See (page 17). 2 Operation on the Easy Control Screen 1 Movie Menu Control Selects an option from the Movie Menu.
iPod Control You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP301V (optional accessory). You can also display video contents on this unit when connecting an iPod with video. Playback Screen Easy Control Screen Basic functions are available even when the playback screen is displayed. Displays the basic operation buttons on the screen.
iPod Control Source Control Screen Switches to the source control screen to use various playback functions. 1 Display the Source Control Screen See (page 14). 2 Operation on the Source Control Screen [ARDM] Starts or stops Album Random Play (plays randomly from current album).* [INFO] Displays information screen of music/ video being played. [LINK] MUSIC Searches for another song of the currently selected artist. See (page 29).
Scrolls to the position of the specified initial Link search (Music file) Searches for another song of the currently selected artist. 1 Display the Source Control Screen See
Radio Listening Various control screens appear in the Tuner Source mode. • Set the remote controller mode switch to "AUD" mode before starting operation, see (page 91). Source Control Screen Multi Function Switches to the source control screen to use various functions. 1 Display the Source Control Screen See (page 14). 2 Operation on the Source Control screen 1 [FM] Switches to the FM1/2/3 band. [AM] Switches to the AM band.
Preset Select Auto Memory Lists and selects memorized station. Stores stations with good reception in memory automatically. 1 Display the Source Control Screen See
Radio Listening Manual Memory Stores the current receiving station in memory. 1 Display the Source Control Screen See (page 30). 2 Select a station you wish to store in memory Radio Text (North American sales area only) You can display the radio text. (Only when receiving the FM broadcast) 1 Select a station See (page 30). 2 Display the radio text 3 Store in memory 1 2 sec. Continue to touch until the memory number appears.
Set Station Name Assigns a name to a station. 1 Tune in to the station to name See (page 30). 2 Start Name set Traffic Information (North American sales area only) When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. 1 Display the Source Control Screen See (page 30). 2 Set the Traffic information mode 3 Enter the name See (page 48) for information on how to enter a name.
Radio Listening Search by Program Type (North American sales area only) A program is tuned when you set its program type. (Only when receiving the FM broadcast) 1 Display the Source Control Screen See (page 30). 2 Enter Program Type Search mode 3 Select a Program Type 1 1 Program Type is displayed. Touch to select a Program Type. [Search] Searches for the program type. It is displayed when the Program type is selected. [User] Continue to touch more than 2 seconds.
TV Watching (DDX8034BT only) Various control screens appear in the TV source mode. You can only operate TV with the optional accessory TV Tuner connected. Function During TV Screen Easy Control Screen Basic functions are available even when the TV screen is displayed. Displays the basic operation buttons on the screen. 1 Display the TV screen 1 Display the Easy Control Screen See (page 16). See (page 17).
TV Watching (DDX8034BT only) Source Control Screen Multi Function Switches to source control screen to use various functions. 1 Display the Source Control Screen See (page 14). 2 Operation on the Source Control Screen 1 [BAND] Switches to TV1 or TV2. [4], [¢] Select a channel. Use the [SEEK] to change the channel tuning sequence. [List] Display the TV Preset List Screen. (page 38). [ ] Switches to the TV screen.
Auto Memory Manual Memory Stores stations with good reception in memory automatically. Stores the current receiving channel in memory. 1 Display the Source Control Screen See (page 36). 1 Display the Source Control Screen See (page 36). 2 Select a band you wish to store in memory 2 Select a station you wish to store in memory 3 Select the Auto Memory mode 3 Store in memory 4 Start Auto Memory 2 sec. Continue to touch until the memory number appears.
TV Watching (DDX8034BT only) Preset Select Set Station Name Lists and selects memorized station. Assigns a name to a station. 1 Display the Source Control Screen 1 Tune in to the station to name See (page 36). 2 Start Preset Select See (page 36). 2 Start Name set 3 Select a station 1 3 Enter the name See (page 48) for information on how to enter a name. 4 End Name set 1 Memorized stations are displayed. Touch to tune in.
SIRIUS/XM Control (North American sales area only) Various control screens appear in the Satellite radio source mode. (only with the optional accessory Satellite radio connected. To connect the SIRIUS tuner, a conversion cable CA-SR20V (optional accessory) is necessary and to connect the XM tuner, an XM interface Box KCA-XM100V (optional accessory) is necessary.) • This document uses the SIRIUS display as an example.
SIRIUS/XM Control (North American sales area only) Channel Search Channel Memory Specifying the desired category and selecting a channel. Stores the current receiving channel in memory. 1 Display the Source Control Screen See (page 39). 2 Display the Category List Screen 1 Display the Source Control Screen See (page 39). 2 Select a channel you wish to store in memory 3 Select a category 1 3 Store in memory 1 Selects a category.
Direct Channel Search Tuning in by entering the desired channel number. 1 Display the Source Control Screen See (page 39). 2 Start Direct Channel Search 3 Enter the channel number 1 1 Enters the channel number. [Cancel] Cancels the direct channel search. [Clear] Clears the channel number. 4 Tune in the channel English B64-4378-00_00_K_En.indd 41 41 09.2.
HD Radio Control (North American sales area only) Various control screens appear in the HD Radio Source mode. (only with the optional accessory HD Radio tuner connected) Source Control Screen Multi Function Switches to the source control screen to use various functions. 1 Display the Source Control Screen See (page 14). 2 Operation on the Source Control screen 1 [HD FM] Switches to the HD FM1/2/3 band. [HD AM] Switches to the HD AM band.
Auto Memory Manual Memory Stores stations with good reception in memory automatically. Stores the current receiving station in memory. 1 Display the Source Control Screen See (page 42). 1 Display the Source Control Screen See (page 42). 2 Select a band you wish to store in memory 2 Select a station you wish to store in memory 3 Select the Auto Memory mode 3 Store in memory 4 Start Auto Memory 2 sec. Continue to touch until the memory number appears.
HD Radio Control (North American sales area only) Receive mode Direct Search Sets the radio broadcasts receive mode. Tuning in by entering the desired frequency or channel number. 1 Display the Source Control Screen See (page 42). 2 Display the Receive mode screen KTC-HR300 (optional accessory) connected only. 1 Display the Source Control Screen See (page 42).
iTunes Tagging (HD Radio Tagging) Using an iTunes Tagging enabled HD Radio you can tag your music. When you hear a song you enjoy on your local HD Radio station, you only have to press the [ATT] button for at least 1 second. The song’s information will then be saved on this unit. The saved songs will then show up in a playlist called “Purchased” in iTunes the very next time you sync your iPod to your computer.
Bluetooth Audio Control You can listen to audio files stored in Bluetooth audio player and cell-phone. Before Use • You need to register your audio player and cell-phone before using it with this unit. For more details, see (page 75). • If you have registered two or more audio players or cellphones, you need to select one of them. For more details, see (page 77). Source Control Screen Switches to control screen to use various functions.
Voice Control (DNX9140 only) The unit is equipped with Automatic Speech Recognition function which allows you to operate it with your voice. The supported languages are US English, UK English, French, German, Dutch, Italian, and Spanish. For information on the recognizable voice commands, refer to (separate volume). • ASR on the Language Setting screen should be set to "Enabled". See (page 68). Voice Control 1 Enter into the Voice control mode Press the TALK switch.
Other Functions Character Entry External Device Power Supply Control Character Entry screen Controlling the external device power supply. 1 Display the Source Select Screen 1 See (page 12). 2 Display the EXT SW Control screen 1 Enters characters. [2], [3] Shifts the cursor. [5], [∞] Scrolls up or down the character button display. [QWE]/ [ABC] Sets the key layout of the character buttons. ABC : Alphabetical key layout. QWE : Qwerty key layout. [Clear] Clears the character.
Muting Audio Volume upon Reception of Phone Call When a telephone call is received... The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen When the call ends... Hang up the phone. The system resumes playing automatically. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to . • Playback of the source output at the AV OUTPUT port may not be paused even a call comes in.
Screen Control Setting the monitor screen. Screen Control 1 Display the Easy Control Screen See (page 17). 2 Display the Screen Control screen "NAV-SYNC": Turning the Dimmer function On or Off according to the Navigation Day/Night display setting. (DNX9140 only) [Mode] Selects a screen mode. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" ⁄ • The Screen Control screen is displayed only when you have applied the parking brake.
Hands Free Unit Control Various functions can be used in the Hands Free control mode. Before Use • You need to register your cell-phone before using it with this unit. For more details, see (page 75). • If you have registered two or more cell-phones, you need to select one of them. For more details, see (page 77). • To use the Phone Book, it must be downloaded to this unit in advance. For details, see (page 51).
Hands Free Unit Control Call Waiting [ [ ] • Answering another incoming call with the current call suspended • Switching between the current call and waiting call Each touch of this button switches the calling party. ] • Answering another incoming call after terminating the current call • Answering the waiting call after terminating the current call Making a Call Displaying the control screen and using various functions.
Calling by Phonebook Calling by Entering a Phone Number You can call a person using his/her phone number that you have registered in the Phonebook. Makes a call by entering a phone number. 1 Display the Hands-Free Control screen See (page 52). 1 Display the Hands-Free Control screen See (page 52).
Hands Free Unit Control Making a Call Using Call Records Calls by selecting a phone number from the outgoing, incoming, or missed calls list. 1 Display the Hands-Free Control screen See (page 52). 2 Display the Voice Recognition screen 1 Display the Hands-Free Control screen See (page 52).
Controlling Tone-based Services Setting Up the Hands-Free Phone Uses tone base service using DTMF (Dual Tone Multi Frequency). The Hands-Free system can be set as follows. 1 Display the Talking screen See (page 53). 1 Display the Hands-Free Control screen See (page 52).
Hands Free Unit Control [Call Beep] Sets the beep of the incoming call. ( "ON") "ON": Beep is heard. "OFF": Beep is canceled. [SMS Receive Beep] Sets the beep of the incoming SMS. ( "ON") "ON": Beep is heard. "OFF": Beep is canceled. [Phone Information Use] Sets whether to use cell-phone phonebook, outgoing calls list, incoming calls list and missed calls list. ( "ON") "ON": Yes. "OFF": No. [SMS Use] Sets the SMS function. ( "ON") "ON": Use SMS function. "OFF": SMS not available.
5 Say the name to register (2nd try) Say within 2 seconds after the Beep. 6 End voice registration Key Word Voice Registration (DDX814/ DDX8034BT) Registers the voice to select the Phone number category by Voice Recognition. 1 Display the Hands Free Setup screen See (page 55). 2 Display the Key Word List screen ⁄ • A message is displayed if the voice is not recognized. Read the message for the further operation.
Hands Free Unit Control 5 Say the phone category to register (1st try) Phone Number Preset Registers frequently used phone number to Hands Free control screen preset button. 1 Display the Hands-Free Control screen See (page 52). 2 Select the Preset number to register Say within 2 seconds after the Beep. 6 Say the phone category to register (2nd try) Say within 2 seconds after the Beep. 7 End voice registration 1 sec.
5 Register phone number SMS (Short Message Service) Uses SMS function. 1 Display the Hands-Free Control screen See (page 52). 2 Display the SMS Select screen 3 Select a function [ [ [ [ ] Displays the SMS create menu screen. ] Displays received message list. ] Displays sent message list. ] Displays the SMS Create Menu screen. The button will be active when any message has been created after power-on. [Download] Retrieves SMS messages from the cell-phone.
Hands Free Unit Control SMS Message screen Creates a new message for the selected message. Create a message character buttons. ABC : Alphabetical key layout. QWE : Qwerty key layout. [Clear] Erases the entered character. If touched more than 1 second, all the input characters are erased. [Space] Enters a space. [SET] Saves the message and returns to the Create SMS Menu screen. Only one draft message can be saved / retained in memory at any one time.
Audio Control Audio Control Menu Audio Control Displays the Audio Control menu to set the sound effect function of this unit. You can adjust the front/rear and right/left audio balance. 1 Display the Source Select Screen 1 Display the Audio Control screen Touch [ SRC ]>[ ] > [Audio Control]. (page 61) 2 Set each item 1 2 Display the Audio Control menu In this manual, the above selection is indicated as: Touch [ ] > [ ].
Audio Control Equalizer Control Graphic Equalizer Setup You can set up the equalizer. You can Manually set the equalizer curve. 1 Display the Equalizer screen 1 Display the Equalizer screen Touch [ ]>[ ] > [Equalizer]. (page 61) 2 Set each item Touch [ ]>[ ] > [Equalizer]. (page 61) 2 Display the Graphic Equalizer screen ⁄ • When "iPod" is selected in , the [EQ] button is deactivated. "iPod" uses its equalizer function. [SystemQ] Selects an equalizer curve type.
Zone Control SRS WOW Control You can set the front and rear audio source. You can set up the SRS WOW effect. 1 Display the Zone Control screen 1 Display the SRS WOW Control screen Touch [ ]>[ ] > [Zone Control]. (page 61) 2 Set the Zone Control Touch [ ]>[ ] > [SRS WOW]. (page 61) 2 Set the SRS WOW Control 1 1 Sets a SRS WOW. You can select any of the following sound fields.
Audio Control Surround Control Dolby Pro Logic II Music Adjustment You can set up the sound field. 1 Display the Dolby Pro Logic II Music Adjust screen 1 Display the Surround Control screen Touch [ 61) ]>[ ] > [Surround Control]. (page 2 Set the Surround Control 1 1 Sets a sound field. You can select any of the following sound fields. "Bypass"/ "Bypass+Center"/ "Dolby PLII Movie"/ "Dolby PLII Music"/ "Dolby PLII Matrix" [Stream Information] Displays the present source information.
Position You can adjust the sound effects according to your listening position. Position DTA Control You can fine-adjust your listening position. 1 Display the Position DTA screen 1 Display the Position screen Touch [ ]>[ ] > [Position]. (page 61) 2 Set the Position Control 2 Select a speaker you wish to adjust 1 2 3 4 5 6 [P1] - [P3] Stores the present adjustment setup in memory, or calls it from memory. To store your adjustment in memory: Continue to touch [P1] to [P3] more than 2 seconds.
Setup Menu You can set up various receiver parameters. How to Display SETUP Menu Screen Displays the Setup menu to set various functions. 1 Display the Source Select Screen SRC 2 Display the Setup Menu Screen In this manual, the above selection is indicated as: Touch [ ] > [ ].
DivX Setup Software Information Checks the registration code. This code is needed when making a disc which has DRM (Digital Rights Management). Checks the software version of this unit. 1 Display the DivX Setup screen Touch [ ] > [ (page 66) 1 Display the Software Information screen ] > [Information] > Touch [ ] > [ [Software]. (page 66) ] > [Information] > [DivX]. Displays the software version. Displays the registration code.
Setup Menu User Interface Language Setting You can setup user interface parameters. You can select the display language for the control screen and audio file tags. 1 Display the User Interface screen ] > [System] > [User Touch [ ] > [ Interface]. (page 66) 2 Set each item 1 Display the User Interface screen Touch [ ] > [ ] > [System] > [User Interface]. (page 66) 2 Display the Language Setting screen 3 Select a language [Beep] Turns the key touch tone On or Off.
Touch Panel Adjustment Clock Setup You can adjust the touch panel operations. You can adjust the clock time. 1 Display the Touch panel Adjustment screen 1 Display the Clock Setup screen Touch [ ] > [ (page 66) ] > [System] > [Touch]. 2 Adjust the Touch panel Touch [ ] > [ (page 66) 2 Setup the Clock 1 Follow the instruction on the screen and touch the center of . [Cancel] Cancels the adjustment and returns to the Touch Panel Adjust screen. [Reset] Resets to the initial status.
Setup Menu Security Setup 5 Register your security code You can set a security code to protect your receiver system against theft. ⁄ 6 Reenter the security code • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 digit number of your choice. 1 Display the Security screen Touch [ ] > [ (page 66) ] > [System] > [Security].
Monitor Angle Control EXT SW Setup You can adjust the position of the monitor. Setting up power specification of the external device for which the power is controlled from this unit. 1 Display the Angle Setup screen Touch [ ] > [ (page 66) ] > [System] > [Angle]. 2 Set the Monitor Angle 1 1 Display the Angle Setup screen Touch [ ] > [ (page 66) ] > [System] > [EXT SW]. 2 Perform EXT SW Setup 1 Sets the Monitor angle. [Memory] Stores the current monitor angle as the angle during power off.
Setup Menu Setup Memory Audio Control, AV-IN SETUP, AV Interface, Navigation, and Audio SETUP settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. 1 Display the SETUP Memory screen Touch [ ] > [ ] > [System] > [SETUP Memory].
Entering Background 6 Load the image Loads a image for background. 1 Connect the device which has the image to load 1 2 Display the Background screen ] > [Display] > Touch [ ] > [ [Background]. (page 66) 3 Display the Background Memory screen 1 Rotates the image. ⁄ • See (page 8) for readable image specifications. • This operation is not possible when USB is selected as the source. Background Change Selects a image for background. [Change] Selects a image for background.
Setup Menu Panel Color Coordinate To register your original color Sets the button illumination color. 1 Start the RGB coordinate 1 Display the Color screen Touch [ ] > [ (page 66) ] > [Display] > [Color]. 2 Adjust each color value 2 Display the Panel Color Coordinate screen 1 [Initialize] Initialization resets the settings made using the Panel Color to the default settings made at the factory.
Screen Adjustment Registering Bluetooth Unit You can adjust the screen mode of the monitor. Registers the Bluetooth unit to be connected. 1 Display the Screen Adjust screen 1 Display the Bluetooth Setup screen Touch [ ] > [ Adjust]. (page 66) ] > [Display] > [Screen 2 Set each item [Bright] Brightness Control [Contrast] Contrast Control [Black] Black Level Adjustment [Dimmer] Dimmer Mode Setup "ON": The display dims. "OFF": The display doesn’t dim.
Setup Menu 4 Select the Bluetooth unit to register 1 Registering Special Bluetooth Unit Registers Special Bluetooth unit, that resulted in error by normal registration method, by selecting from the listed models. 1 Display the Special Device List screen 1 Displays the searched Bluetooth unit. [Search] Searches for a Bluetooth unit. [Cancel] Cancels searching of Bluetooth unit. 2 Select a model name 5 Enter PIN code 1 Displays the Bluetooth unit name that can be registered.
Registering Bluetooth Unit PIN Code Bluetooth Unit Connection Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side. Selects the Bluetooth unit to connect. 1 Display the Bluetooth Setup screen Touch [ ] > [ (page 66) ] > [Bluetooth SETUP]. 1 Display the Bluetooth Setup screen Touch [ ] > [ (page 66) ] > [Bluetooth SETUP].
Setup Menu AV Input Setup AV Interface Setup You can set AV input parameters. You can set audio and visual (AV) interface parameters. 1 Display the AV-IN Setup screen Touch [ ]>[ ] > [AV-IN SETUP]. (page 66) 2 Set each item 1 Display the AV Interface screen Touch [ ]>[ ] > [AV Interface]. (page 66) 2 Set each item [AV-IN2 Interruption] Sets an image display of the system that is connected via the AV INPUT2 port.
Navigation Setup You can set Navigation parameters. 1 Display the Navigation Setup screen Touch [ ]>[ ] > [Navigation]. (page 66) [On Screen Navigation] Sets an on-screen display of the navigation screen. ( "OFF") (DDX814/ DDX8034BT only) "Auto": Information is displayed for 5 seconds when updated. "OFF": Information is not displayed. 2 Set each item [NAV Interrupt Speaker] Selects speakers used for voice guidance of the navigation system.
Setup Menu DSP Bypass Control Speaker Setup Temporarily bypassing DSP (Digital Signal Processor) System. You can select a speaker type and its size to get the best sound effects. 1 Display the Audio SETUP screen 1 Display the Speaker Select screen Touch [ 66) ]>[ ] > [Audio SETUP]. (page 2 Set the DSP Select Touch [ ] > [ ] > [Audio SETUP] > [Speaker Select].
3 Select a speaker type Crossover Network Setup You can set a crossover frequency of speakers. 1 Select the speaker to set the crossover 1 2 3 You can select any of the following speaker types.
Setup Menu Car Type (DTA) Setup Speaker Location setup You can setup the car type and speaker network, etc. 1 Display the Speaker Location Setup screen 1 Display the Car Type Setup screen Touch [ ] > [ Type]. (page 66) ] > [Audio SETUP] > [Car 2 Set the speaker locations 2 Setup the Car Type If your car type is selected, the Digital Time Alignment and Equalizer is set automatically (for timing adjustment of sound output for each channel) to have the highest surround effects.
Channel Level 3 Set a delay time You can set the volume at each setup position. 1 Display the Car Type Setup screen ] > [Audio SETUP] > Touch [ ] > [ [Channel Level]. (page 66) 2 Select a speaker you wish to adjust Make fine adjustment of the delay time of the speaker output specified at to have a more suitable environment for your vehicle.
Setup Menu DVD Setup You can set up the DVD play. 1 Display the DVD Setup screen Touch [ ]>[ ] > [DVD SETUP]. (page 66) 2 Set each item Scan format (showing pictures cut at the right and left ends). [Parental Level] Displays the Parental Lock screen.*1 ( "OFF") (See , page 85) [Disc SETUP] Makes the settings related to the disc media. (See , page 86) ⁄ • * Disabled when a DVD is being played.
DVD Parental Level Setup Sets a parental level. 5 Select a parental level and complete the setup 1 Display the DVD Setup screen ]>[ Touch [ ] > [DVD SETUP]. (page 66) 2 Display the Parental Level code number screen Selects a parental level. ⁄ 3 Enter the code number • If a disc has higher parental lock level, you need to enter the code number. • The parental lock level varies depending on a loaded disc.
Setup Menu Disc Setup USB Setup Performs setup when using disc media. Performs setup when using USB. 1 Display the DVD Setup screen 1 Display the USB Setup screen Touch [ ]>[ ] > [DVD SETUP]. (page 66) 2 Display the Disc Setup screen 3 Set each item [Picture Display Time] Selects a picture display time. *1 ( "Long") The Display of a JPEG picture is changed. ("Short", "Middle", "Long") [CD Read] Sets a music CD playback.
iPod Setup SIRIUS Parental Code Setup Performs setup when using iPod. Sets a SIRIUS Parental code. 1 Display the iPod Setup screen 1 Display the SIRIUS Setup screen Touch [ ]>[ ] > [iPod SETUP]. (page 66) 2 Set each item ]>[ Touch [ 66) ] > [SIRIUS SETUP]. (page 2 Display the Parental Code screen [AudioBook Speed] Sets the Audio book playback speed. ( "Normal") [Wide Screen] Sets Wide Screen on or off. ( "OFF") [On Screen iPod] Sets an on-screen display of the iPod Playback screen.
Setup Menu 4 Enter the new code number SIRIUS Parental Lock Setup Sets a SIRIUS Parental Lock function on or off. 1 Display the SIRIUS Setup screen Touch [ 66) ]>[ ] > [SIRIUS SETUP]. (page 2 Display the Parental Code screen 5 Confirm the code number Enter the same code number as you input in step 4. ⁄ • You need to complete beforehand. SIRIUS Parental code is now set, and the display returns to SIRIUS Setup screen.
SIRIUS Parental Lock Channel Select 5 Set the parental lock for each channel Selects the channel to enable SIRIUS Parental lock function. 1 2 1 Display the SIRIUS Setup screen Touch [ 66) ]>[ ] > [SIRIUS SETUP]. (page 3 2 Display the Parental Code screen 3 Enter the code number Enter the same code number as you input in . 1 Channel list 2 Sets the Parental lock function on or off for each channel.
Setup Menu TV Setup The TV signal receiving areas can be set. (only when the optional accessory TV Tuner connected) 1 Displaying TV SETUP screen Touch [ ]>[ ] > [TV SETUP]. (page 66) 2 Set each item [On Screen TV] Sets an on-screen display of the TV screen. ( "Auto") (only when the optional accessory TV tuner connected) "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. 90 DNX9140/DDX814/DDX8034BT B64-4378-00_00_K_En.
Remote Controller This unit can be operated using the Remote Controller supplied with this unit. ¤ • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving. • Do not place the battery near an open flame or heat source. This may cause the battery to explode. • Do not recharge, short, break up or heat the battery or place it in an open fire.
Remote Controller Common operations (AUD mode) Source switching Switches to the source to be played. Display angle Switches the display angle each time it is pressed. NAVI O AUDIO RETURN MODE/TOP MENU FNC/MENU/PBC ROUTEM CANCEL VOICE AV OUT OPEN VIEW MAP DIR SUBTITLE DISP ANGLE O O ENTER • DVD • • Cursor key Moves the cursor when displaying menu. ZOOM MENU OUT O MAP DIR ANGLE O O D O 1 VOL ZOOM AM− O Y 2 ZONE 2ABC 3 DEF CLEAR ENTER Enters options.
DVD/VCD (DVD mode) Track search and file search Selects the track or file to be played. VIEW Track number Cancel MAP DIR ANGLE FM+ O O O D O 1 VCD 2.X (PBC ON) O VCD 1.X, VCD 2.X (PBC OFF) VOL ZOOM AM− O Y 2 ZONE 2ABC 3 DEF 1 Play/Pause Pauses the track. Press again to resume playing. DISP SRC V.SEL ZOOM MENU OUT Scene number Number Cancel Once you have switched to the direct search feature, specify the search number from the numeric keypad, and then press [ENTER] key.
Remote Controller ZOOM Switches the zoom ratio each time you press this key. VIEW Direct search R.VOL 7PQRS 8TUV 9WXYZ CLEAR 1 + DIRECT 0 # BS ATT MAP DIR ANGLE FM+ O O O D O 1 O VOL ZOOM AM− O Y 2 ZONE 2ABC 3 DEF 1 Picture Angle Switches the picture angle each time you press this key.
Radio (AUD mode) NAVI (NAVI mode) Band switching Switches to bands received by the unit. Joystick Scrolls the map, or moves the cursor. ZOOM MENU O VOL AM− O Y 2 ZONE MAP DIR R.VOL BS OUT ATT O 9WXYZ 2ABC 1 Example: 810kHz (AM) 8TUV 0 IN POSITION 1 AUD ENTER V.SEL ZOOM 0 MENU OUT IN POSITION O AUD ENTER O O 1 Y TV• DISP SRC Numeric keypad • DVD • MENU Displays Main menu. Example: 92.1MHz (FM) 0 O DISP V.
Remote Controller O AUDIO RETURN CANCEL VOICE MAP DIR SUBTITLE ROUTEM ANGLE O MODE/TOP MENU FNC/MENU/PBC ROUTEM OPEN VIEW MAP DIR ANGLE FM+ D O ZOOM O FM+ O O O D VIEW VOL ZOOM O Y 2 ZONE MAP DIR ANGLE O ROUTEM VOICE AV OUT OPEN VIEW MAP DIR O 1 AUDIO RETURN CANCEL SUBTITLE O 2 ZONE 2ABC 3 DEF Direct tuning (NTSC TV type only) 7PQRS 8TUV 9WXYZ CLEAR MAP DIR Switches between the heading up navigation and north up navigation map displays.
Initial Setup When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is displayed. Initial Setup 3 End initial setup 1 Turns the power On 2 Set each item ⁄ • The settings above can be changed in (page 66). [Language] Select the language used for the control screen and setting items. (page 68) [Angle] You can adjust the position of the monitor. (page 71) [iPod AV Interface Use] Sets the terminal to which the iPod is connected to.
Status bar Indicator items Shown below is a list of indicators displayed on the Status bar. Source Display Overview General Indicates that the attenuator is active. Turns on the Dual zone function. Indicates the connection state of the Bluetooth hands-free unit. (Orange: Connected. White: Not connected.) DVD/CD "FO-REP" Indicates that the Folder repeat function is ON. MEDIA "IN" Indicates that a disc is inserted. (White: A Disc is inside the unit. Orange: Error at the disc player.
DVD Language Codes Code Language Code Language Code Language aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gli gn gu ha he hi hr hu hy ia ie ik id Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish
Help? Troubleshooting Some functions of this unit may be disabled by some settings made on this unit. ! ! • Cannot set up the subwoofer. • Cannot set up subwoofer phase. • No output from the subwoofer. • Cannot set up the low pass filter. • Cannot set up the high pass filter. ▲ Subwoofer is not set to On. ☞ (page 80) ▲ The DSP Select is Bypass. ☞ (page 80) ▲ The Dual zone function is enabled. ☞ (page 63) ▲ The unit is set to STANDBY source.
Help? Error When the unit fails to operate correctly, the cause of the failure appears on the display. "Protect" : Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. ➡ Wire or insulate the speaker cord as appropriate and then push the Reset button. "Hot Error" : When the internal temperature of this unit rises to 60°C or more, the protection circuit is activated and you may not be able to operate the unit.
Help? Error "Check SIRIUS" : The unit cannot recognize the connected SIRIUS Tuner Box. ➡ Check the connection of the SIRIUS Tuner Box. "Antenna Error" : Something is wrong with the anntena. ➡ Check the connection of the antenna. "Off Air" : The broadcast of the selected channel has finished. "Navigation Error. Please turn on power again later." (DNX9140 only) : The communication error has occurred due to severely cold temperature. ➡ Turn on power again after warming your car interior.
Specifications Monitor section USB interface section Picture Size : 6.98 inches (diagonal) wide : 157.2 mm (W) x 82.3 mm (H) Display System : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 1,152,000 (800H x 480V x RGB) Effective Pixels : 99.99 % Pixel Arrangement : RGB striped arrangement Back Lighting : Cold Cathode Fluorescent Tube USB Standard : USB 2.
Specifications FM tuner section Audio section Frequency Range 200 kHz : 87.9 MHz – 107.9 MHz (DNX9140/DDX814) 50 kHz : 87.5 MHz – 108.0 MHz (DDX8034BT) Usable Sensitivity (S/N : 30 dB) : 9.3 dBf (0.8 μV/ 75 Ω) Quieting Sensitivity (S/N : 50 dB) : 15.2 dBf (1.6 μV/ 75 Ω) Frequency Response (± 3.0 dB) : 30 Hz – 15 kHz S/N Ratio (dB) : 70 dB (MONO) Selectivity (± 400 kHz) : ≥ 80 dB Stereo Separation : 35 dB (1 kHz) Maximum Power (Front & Rear) : 50 W x 4 Full Bandwidth Power (Front & Rear) (4 Ω, 14.
Navigation section (DNX9140 only) Receiver : High-sensitivity GPS receiver Reception Frequency : 1575.42 MHz (C/A code) Acquisition Times Cold : < 38 seconds Factory Reset : < 45 seconds (On average for a stationary receiver with a clear view of the sky) Accuracy Position : < 10 meters typical Velocity : 0.05 m/sec. RMS Position Method : GPS Antenna : External GPS antenna External SW Maximum Power Supply Current : 500 mA General Operating voltage : 14.4 V (10.
About DivX DivX is a popular media technology created by DivX, Inc. DivX media Files contain highly compressed video with high visual quality that maintains a relatively small file size. DivX files can also include advanced media features like menus, subtitles, and alternate audio tracks. Many DivX media files are available for download online, and you can create your own using your personal content and easy-to-use tools from DivX.com.
DDX8034BT: The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.
B64-4378-00_00_K_En.indd 108 09.2.