Owner's Manual

Security Code Setup
(DDX819WBTL)
You can set up a security code to protect your
receiver system against theft.
When the Security Code function is activated,
the code cannot be changed and the function
cannot be deactivated. Note that the Security
Code can be set with a 4 to 8 digit number of
your choice.
Preparation
• Set DEMO to OFF in the Special screen.
See Special Setup (P.86) in the Instruction
Manual.
D Press the MENU button.
► Popup menu appears.
f) Touch SETUP.
a:
cce(cor ·, p..i,(Hf (dnlt-'1.-1 Auno U')B
4.C ~ rrr-, •
► SETUP Menu screen appears.
D Touch Security.
C SET UP
Audio
f,
-
AV D1~pldy lJ<.er Interface Camera
·, ,
Special
Bluetooth
~ec.uoty
► Security screen appears.
D Touch Security Code Set on the Security
screen.
► Security Code Set screen appears.
El Enter a security code with 4 to 8 digits
and touch Enter.
Secur ity Code S et ~
Please enter a new security code . (13
Fnter
Basic Operations
0 Enter the same code again and touch
Enter.
Now, your security code is registered.
NOTE
• This setting is available when demonstration
mode is set to 'OFF". See Special Setup (P.86)
in the Instruction Manual.
• Touch BS to delete the last entry.
• If you enter a different security code, the
procedure returns to step 5 (for first code entry).
• If you have disconnected the Receiver from the
battery, enter the correct security code as that
you have entered in step 5 and touch Enter. You
can use your receiver.
To change the security code:
D Touch Security Code Change on the
Security screen.
► Security Code Set screen appears.
f) Enter the current registered security code
and touch Enter.
D Enter a new security code with 4 to 8
digit number and touch Enter.
D Enter the same code again and touch
Enter.
The new security code is registered.
To clear the security code:
D Touch Security Code Cancellation on
the Security screen.
► Security Code Set screen appears.
f) Enter the current registered security code
and touch Enter.
The security code is cleared.
English I 7