Owner's Manual

Setup
84
User Interface Setup
You can setup user interface parameters.
1
Press the [MENU] button.
 Popup menu appears.
2
Touch [SETUP].
 SETUP screen appears.
3
Touch [User Interface].
 User Interface screen appears.
4
Set each parameter as follows.
■ [Small Audio Text]
Change the text size for the source control
screen.
[ON] : Change the text size smaller.
[OFF] (Default): Cancel.
■ [Steering Remote Controller]
(DDX819WBTL)
Sets the desired function in the steering
remote controller.
See Learning function of steering remote.
(P.85)
■ [Beep] (Except DDX9906XR)
Turn the key touch tone on or off.
Default is “ON”.
■ [Beep Volume] (DDX9906XR)
Set the sound volume of the key touch tone.
"0" (Off ) – "3" (Default) – "5"
■ [Widget SETUP]
Set up the widget displayed on the Home
screen. (P.20)
■ [Parking Assist Display]
(Except DDX819WBTL)
When an ADS adapter is connected, you can
display information about obstacles around
the car.
[ON]: Always displays information.
[Dyn.] (Default): Displays information when
the sensor detects obstacles.
[OFF]: Cancels this function.
This can be set when the iDataLink
(commercially available) is connected.
■ [Parking Assist Position]
(Except DDX819WBTL)
Select where to display information about
obstacles on the screen (left or right).
“Left”/“Right” (Default)
This can be set when the iDataLink
(commercially available) is connected.
■ [Language Select]
Select a language.
■ [Touch Panel Adjust]
(DDX8706S / DDX819WBTL /
DMX9706S)
Adjust the sensing position of the touch
panel. (P.85)
■ [Time Format]
Select the time display format.
"12-Hour" (Default)/"24-Hour"
■ [Clock]
[GPS-SYNC ](Default): Synchronizes the clock
time with the GPS. (Except DDX819WBTL)
[RDS-SYNC]: Synchronizes the clock time
with the RDS. (DDX819WBTL only)
[Manual]: Set the clock manually.
■ [Time Zone]
If you have selected [Manual] for Clock,
select the time zone.
■ [Clock Adjust]
If you select [Manual] for Clock, adjust the
date and time manually. (P.84)
Ñ Adjust the date and time
manually
1
Touch [Clock] on the User Interface screen.
2
Select [Manual].
3
Touch [Time Zone] on the User Interface
screen.
4
Select the time zone.
5
Touch [Clock Adjust] on the User Interface
screen.