Owner's Manual
Table Of Contents
- Instruction Manual
- Before Use
- Basic Operations
- Functions of the Buttons on the Front Panel
- Turning on the Unit
- Initial Settings
- Adjusting the volume
- Display Adjustment (DDX9907XR / DDX9707S / DMX957XR)
- Viewing Angle (DMX907S / DMX9707S)
- Touch screen operations
- HOME screen descriptions
- Popup menu
- Source selection screen description
- Source control screen descriptions
- List screen
- Widget
- Disc 
- APPS
- USB
- iPod/iPhone
- Radio 
- HD Radio™ Tuner 
- SiriusXM®
- Bluetooth Control
- Other External Components
- Setup
- Controlling Audio
- Remote control
- Connection/Installation
- Troubleshooting
- Appendix
- Quick Start Guide
- Contents
- Before Use
- Basic Operations
- Functions of the Buttons on the Front Panel
- Turning on the Unit
- Initial Settings
- Adjusting the volume
- Display Adjustment (DDX9DDX9DMX957XR07S07XR / 10 / 10)
- Viewing Angle (DMX9DMX9707S7S / 10)
- Touch screen operations
- HOME screen descriptions
- Popup menu
- Source selection screen description
- Source control screen descriptions
- List screen
- Disc 
- USB/iPod
- HD Radio™ Tuner/Radio
- Bluetooth Control
- Controlling Audio
- Connection/Installation
- Appendix
- Correction
- Warranty
Controlling Audio
91English
■ [SW Level]
Adjust the subwoofer volume. This setting
is not available when Subwoofer is set to
“None”. See Speaker / X’over setup (P.88).
Ñ Recall the EQ curve
1
Touch [Preset Select].
2
Select an EQ curve.
NOTE
• [iPod] is available for the iPod and Apple CarPlay
sources and it is connected via USB.
• [iPod] is also available for the Apple CarPlay
source that is connected wirelessly.
Ñ Save the EQ curve
1
Adjust the EQ curve.
2
Touch [Memory].
3
Select where to save.
Volume Offset
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
1
Press the [MENU] button.
Popup menu appears.
2
Touch [Audio].
Audio screen appears.
3
Touch [Volume Offset].
4
Touch [+] or [-] to adjust the level.
■ [Initialize]
Returns to the initial settings.
NOTE
• If you have increased the volume first, then
reduce the volume using “Volume Offset”.
Switching the current source to another source
suddenly may output extremely loud sound.