DDX9716BTS DDX9716BTSR DDX8016DABS MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL © 2016 JVC KENWOOD Corporation B5A-1049-10 c (EN/QN)
CONTENTS BEFORE USE............................................................ 2 INITIAL SETTINGS................................................... 4 Initial setup.......................................................................... 4 Setting the security function........................................ 4 Calendar/clock settings.................................................. 6 BASICS..................................................................... 7 Component names and functions...............
BEFORE USE The marking of products using lasers The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.
INITIAL SETTINGS Initial setup [Language] When you power on the unit for the first time, the initial setting screen appears. • You can also change the settings on the screen. (Page 62) 1 Perform the initial settings. Touch the desired item to configure the setting. • You can scroll the screen by touching [J]/[K] to show more items. • If another setting screen is displayed, set the item, then touch [ ] to return to previous screen.
INITIAL SETTINGS 3 Display the screen. 6 Repeat step 5 to confirm your security code. Now, your security code is registered. • To return to the Home screen, press HOME on the monitor panel, or touch [ ] to the return to the previous screen. • When the unit is disconnected from the battery, you are required to enter the security code. Enter the correct security code, then confirm the entry. 4 Display the screen.
INITIAL SETTINGS Calendar/clock settings 1 Display the source/option selection screen. 4 Select the method to set the clock. • Scroll the page to show the item. [GPS-SYNC] [Manual] Synchronizes the clock time with the GPS. Sets the clock manually. (See the right column.) • To close the window, touch [Close]. 5 Select the appropriate time zone for [Time Zone]. 3 Display the screen.
BASICS Component names and functions ◊ Caution on the volume setting: Digital devices produce very little noise compared with other sources. Lower the volume before playing these digital sources to avoid damaging the speakers by sudden increase of the output level. DDX9716BTS/DDX9716BTSR 1 Monitor panel* 2 Screen (touch panel) 3 Power indicator/Security indicator • Lights up while the unit is turned on. • Flashes when the security function is activated.
BASICS ❏❏Turning off the screen Common operations ❏❏Turning on the power DDX9716BTS DDX9716BTSR DDX8016DABS On the touch panel: Select [Display OFF] on the pop-up short-cut menu. (Page 13) On the monitor panel: 2 DDX8016DABS (Hold) (Hold) (Hold) ❏❏Adjusting the volume To adjust the volume (0 to 35) DDX9716BTS DDX9716BTSR Press J to increase, and press K to decrease. • Holding J increases the volume continuously to level 15.
BASICS ❏❏Putting the unit in standby 1 Display the source/option selection screen. On the Home screen or the source control screen: Common screen operations ❏❏Touch screen operations To perform operations on the screen, you need to touch, touch and hold, flick or swipe to select an item, display setting menu screen or to change the page, etc. ❏❏Home screen descriptions You can select playback sources, display setting screens, or display information on the Home screen.
BASICS ❏❏Source/option selection screen descriptions You can display all playback sources and options on the source/option selection screen. • You can customize the source/option selection screen. (Page 13) 1 ❏❏Source control screen descriptions You can perform source playback operations on the source control screen. • The operation buttons and information displayed vary depending on the selected source.
BASICS ❏❏ screen descriptions ❏❏List screen descriptions You can change the detailed settings. (Page 62) During audio/video source playback, you can select the desired item easily from the list. 1 2 1 2 ❏❏Playback operations during video playback 3 1 2 3 Common operation buttons and indications: 1 Selects the menu category. 2 Returns to the previous screen. 3 Changes the page. [J]/[K]: Scrolls the page. • You can also scroll the page by swiping on the touch panel.
BASICS Selecting the playback source/ option 1 Display the source/option selection screen. On the Home screen or the source control screen: 2 Select a source/option. • To display more items, touch [ ]/[ ] or flick to change the page. 12 [Android Auto]/[Apple CarPlay]*1 *2 Switches to the Android Auto/ Apple CarPlay/App screen from the connected iPod touch/iPhone/ Android device*2. (Pages 24 – 25) [Radio] Switches to the radio broadcast. (Page 27) [Bluetooth] Plays a Bluetooth audio player.
BASICS Selecting the playback source on the Home screen • The 3 items displayed on the source/option selection screen as the large icons are shown on the Home screen. • You can change items displayed on this area by customizing the source/option selection screen. (See the right column.) Selecting the playback source on the source control screen Display source selection buttons by touching [ ]/[ ] on the source control screen (Page 10), then select a playback source.
DISCS Playing a disc • If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. • For playable disc types/file types, see page 76. ❏❏Inserting a disc Insert a disc with the label side facing up. • For DDX9716BTS/DDX9716BTSR: To open the monitor panel, see page 8. DDX9716BTS DDX9716BTSR • If “ ” appears on the screen, the unit cannot accept the operation you have tried to do.
DISCS Operation buttons • Available buttons on the screen and operations differ depending on the type of disc/file being played back. [Hide] Hides the indicators and buttons. Displays the other operation button [ ] window. • To hide the window, touch [ ]. Selects Repeat playback mode. [ ] (Page 17) Selects Random playback mode. [ ] (Page 17) Displays the [ ] screen. (Page 54) Displays the folder/track list. [ ] (Page 16) [S] [T] • Selects a chapter/track.
DISCS ❏❏Selecting a folder/track on the list To search all folders/tracks in a disc To search in the folder containing the current track 1 Display the folder/track list. ❏❏Activating PBC (Playback Control) function (for VCD only) While playing a VCD with PBC... 2 Select an item. • Proceed until you select the desired track. • For details about the list operation, see page 11. • Scroll the page to show more items. • To hide the list, touch [ ]. • The PBC indicator lights up.
DISCS ❏❏Video menu operations (except for VCD) You can display the video menu screen during video playback. • The operation buttons disappear when [Hide] is touched or when no operation is done for about 5 seconds. 1 Display the video menu screen. • Available buttons on the screen and operations differ depending on the type of disc/file being played back. [TOP] Displays the top menu. [MENU] Displays the disc menu. [Return] Displays the previous screen. [Enter] Confirms the selection.
USB DISCS Settings for DVD playback 1 ❏❏Setting items [Menu Language] Select the initial disc menu language. (Initial: English) (Page 78) [Subtitle Language] Select the initial subtitle language or turn subtitles off (Off). (Initial: English) (Page 78) Select the initial audio language. (Initial: Original) (Page 78) You can change the dynamic range while playing using Dolby Digital software. • Wide: Select this to enjoy a powerful sound at a low volume level with its full dynamic range.
USB Playback operations When the operation buttons are not displayed on the screen, touch the area shown on the illustration. • To change settings for video playback, see page 58. ❏❏Indications and buttons on the source control screen For audio playback 1 2 1 2 3 4 For video playback 4 Playback information • The information displayed on the screen differs depending on the type of file being played back. 1 Playback mode (See below.
USB ❏❏Selecting a track in a list To search all folders/tracks in a USB device 1 Display the list. 3 Select the desired track. • Proceed until you select the desired track. • For details about the list operation, see page 11. From : 1 Select the file type. 2 Select a category, then the item in the selected category. 2 Select the list type. From : Select the folder, then the item in the selected folder.
iPod/iPhone Preparation ❏❏Connecting iPod/iPhone • For details about connecting iPod/iPhone, see page 71. • For playable iPod/iPhone types, see page 77. Connect your iPod/iPhone according to your purpose or the type of iPod/iPhone. Wired connection • To listen to music: –– For Lightning connector models: Use USB Audio cable for iPod/iPhone—KCA-iP103 (optional accessory). –– For 30-pin connector models: Use USB Audio cable for iPod/iPhone—KCA-iP102 (optional accessory).
iPod/iPhone Playback operations When the operation buttons are not displayed on the screen, touch the area shown on the illustration. • To change settings for video playback, see page 58. ❏❏Indications and buttons on the source control screen 1 2 3 4 Playback information 1 Playback mode (See the right column.) 2 Song information • Touching [<] scrolls the text if not all of the text is shown.
iPod/iPhone ❏❏Selecting an audio track from the list To search all tracks in iPod/iPhone 1 Display the list. 2 Select the list type. 3 Select the desired track. • Proceed until you select the desired track. • For details about the list operation, see page 11. From : Select a category, then the item in the selected category. • Available categories differ depending on the type of your iPod/iPhone.
APPS—Android Auto™/Apple CarPlay You can use an App of the connected iPod touch/ iPhone/Android on this unit.
APPS—Android Auto™/Apple CarPlay Using Apps of iPhone—Apple CarPlay ❏❏About CarPlay CarPlay is a smarter, safer way to use your iPhone in the car. CarPlay takes the things you want to do with iPhone while driving and displays them on the screen of the unit. You can get directions, make calls, send and receive messages, and listen to the music from iPhone while driving. You can also use Siri voice control to make it easier to operate iPhone. • For details about CarPlay, visit
APPS—Android Auto™/Apple CarPlay ❏❏Operation buttons and available Apps on the home screen of CarPlay You can use the Apps of the connected iPhone. • The items displayed and the language used on the screen differ depending on the connected device. 1 3 2 1 Application buttons Starts the application. 2 [ ] button • On the App screen: Displays the home screen of CarPlay. (Touch) • On the home screen of CarPlay: Activates Siri.
Radio Listening to the radio ❏❏Indications and buttons on the source control screen 1 2 3 4 5 6 78 9 p Radio reception information 1 Preset no. 2 Seek mode (See the right column.) 3 Text information • Touching [<] scrolls the text if not all of the text is shown. • Touching [ ] switches the information as follows: –– Frequency/PS name/Radio Text/title and artist –– Frequency/PTY genre/Radio Text plus 4 Preset list (Page 28) 5 Standby reception indicators (Page 29) 6 AF indicator (Page 30) 7 LO.
Radio Presetting stations 3 Select a preset number to store. FM Radio Data System features ❏❏Storing stations in the memory ❏❏Searching for FM Radio Data System programs—PTY Search You can preset 15 stations for FM and 5 stations for AM. Automatic presetting—AME (Auto Memory) You can search for your favorite programs being broadcast by selecting the PTY code. (Hold) 1 Display the screen. The station selected in step 1 is stored. • Scroll the page to show more items.
Radio Selecting a language for the PTY search 1 Display the screen. ❏❏Activating/deactivating TI/News Standby Reception To deactivate TI Standby Reception: Touch [TI]. (The TI indicator turns off.) TI Standby Reception You can receive traffic information even while listening to another source by activating TI Standby Reception. • The volume adjustment for Traffic Information is automatically memorized.
Radio News Standby Reception 1 Display the screen. ❏❏Tracing the same program—NetworkTracking Reception ❏❏Automatic TI station seek—Auto TP Seek When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM Radio Data System station of the same network, possibly broadcasting the same program with stronger signals. • When shipped from the factory, Network-Tracking Reception is activated.
DIGITAL RADIO (DAB) (Only for DDX8016DABS) About DAB (Digital Audio Broadcasting) What is DAB system? DAB (Digital Audio Broadcasting) is one of the digital radio broadcasting systems available today. It can deliver digital quality sound without any annoying interference or signal distortion. Furthermore, it can carry text and data. In contrast to FM broadcast, where each program is transmitted on its own frequency, DAB combines several programs (called “services”) to form one “ensemble.
DIGITAL RADIO (DAB) ❏❏Selecting a service from the service list 1 Display the screen. ❏❏Selecting a preset station from the list Presetting services ❏❏Storing services in the memory You can preset 15 services. 1 Select a service you want to preset. (Page 31) 2 Display the preset list. 2 Select a category (1), then select a service from the list (2). 3 Select a preset number to store. • Touch [ A–Z] to search a service by initial. • Touch and hold [ ] to update the .
DIGITAL RADIO (DAB) Radio Data System features ❏❏Searching for Radio Data System programs—PTY Search You can search for your favorite programs being broadcast by selecting the PTY code. 1 Display the screen. • Scroll the page to show more items. PTY Search starts. If there is a service broadcasting a program of the same PTY code as you have selected, that service is tuned in.
DIGITAL RADIO (DAB) Using the Replay function You can temporarily record the broadcast from the current time, and replay the recorded data. • You can not use the Replay function ([Instant Replay] button is not available) in the following cases: –– When the data is not recorded. –– When receiving a service of the program type selected for . (Page 35) • When the recording capacity is full, the older recorded data is deleted and recording continues.
DIGITAL RADIO (DAB) Settings for Digital Audio Radio You can set the Digital Radio related items. If the service of the set program type begins with the ensemble being received, the unit switches from any source to Digital Radio for service reception. Select the type of program. announcement item you activated begins with the ensemble being received, this unit switches from any source to the announcement received.
OTHER EXTERNAL COMPONENTS Using a camera • To connect a camera, see page 72. • To use a rear view camera, a REVERSE lead connection is required. (Page 70) ❏❏Settings for the camera 1 Display the source/option selection screen. On the Home screen or the source control screen: 2 Display the screen. 3 Display the screen. 4 Configure the camera settings. • Scroll the page to show more items.
OTHER EXTERNAL COMPONENTS ❏❏Displaying the picture from the camera The camera screen is displayed when you shift the gear to the reverse (R) position. To switch the screen between the front view camera and the rear view camera Using external audio/video players—AV‑IN When the operation buttons are not displayed on the screen, touch the area shown on the illustration. • To change settings for video playback, see page 58. • To erase the operation buttons, touch the screen.
OTHER EXTERNAL COMPONENTS Watching a TV (Only for DDX8016DABS) When the operation buttons are not displayed on the screen, touch the area shown on the illustration. • To change settings for video playback, see page 58. ❏❏Displaying the TV screen 1 Select “AV-IN1” as the source. (Page 12) 2 Turn on the TV. Preparation • Connect the TV tuner box to the AV-IN1 input terminal and TV tuner remote control output terminal. (Page 72) • Select [ON] for [TV Tuner Control].
ENGLISH 39
BLUETOOTH Information for using Bluetooth® devices Connecting Bluetooth devices ❏❏Activating/deactivating the Bluetooth function When you use the Bluetooth device, activate the Bluetooth function on the unit. Bluetooth is a short-range wireless radio communication technology for mobile devices such as mobile phones, portable PCs, and other devices. Bluetooth devices can be connected without cables and communicate with each other.
BLUETOOTH Auto pairing When is set to [ON], iOS devices (such as iPhone) are automatically paired when connected via USB. (Page 49) Pairing a Bluetooth device from the target device 1 Search for the unit (“DDX****”) from your For a Bluetooth device compatible with Bluetooth 2.0: Select the unit (“DDX****”) on your Bluetooth device. • If a PIN code is required, enter the PIN code shown on the screen (initial: “0000”). –– To change PIN code, see page 43.
BLUETOOTH ❏❏Connecting/disconnecting a paired Bluetooth device 5 Select the device you want to connect/ disconnect. Two devices can be connected simultaneously. ❏❏Deleting a paired Bluetooth device 1 Display the
BLUETOOTH ❏❏Changing the PIN code 1 Display the screen. (Page 42) 2 Display the PIN code input screen. 3 Enter the PIN code (1), then confirm the entry (2). ❏❏Change the device name of the unit displayed on the paired device 1 Display the screen. (Page 42) Using a Bluetooth mobile phone ❏❏Receiving a call When a call comes in... 2 Display the device name entry screen. 3 Enter the device name (1), then confirm the entry (2).
BLUETOOTH ❏❏Ending a call While talking... ❏❏Adjusting the volume during a call/ echo cancel level/noise reduction volume ❏❏Switching between handsfree mode and phone mode While talking... 1 Display the window. While talking... Each time you touch the button, the talking method is switched ( : handsfree mode / : phone mode). 2 level. • −10 to +10 (initial: 0). * • −5 to +5 (initial: 0).
BLUETOOTH ❏❏Switching between two connected devices When two devices are connected, you can change the device to use. While using a Bluetooth mobile phone, select the device you want to use. ❏❏Sending dial tone during a call ❏❏Making a call You can send dial tone during a call using the DTMF (Dual Tone Multi Frequency) function. 1 Display the phone control screen. 1 Display the tone input window. On the Home screen or the source control screen: While talking... 1 Display the phone control screen.
BLUETOOTH From the call history ( missed calls/ received calls/ dialed calls) Display the call history list (1), then select the target to make a call (2). • If the initial character is a number, touch [1] and then select the number. • Touch [ ] to delete the last entry. • Touch [ ] to hide the keyboard. From the preset list Display the preset list (1), then select the target to make a call (2). 3 Select a contact to call. • Scroll the page to show more items.
BLUETOOTH Voice dialing • Available only when the connected mobile phone has a voice recognition system. 1 Activate voice dialing. • You can also activate voice dialing by holding /VOICE on the monitor panel. 2 Say the name of the person you want to call. ❏❏Presetting phone numbers You can preset up to 10 phone numbers. 1 Display the preset list. (Page 45) 2 3 Select a position to store into. 4 Select a method to add a phone number to preset list, then register the number to the preset list.
BLUETOOTH ❏❏Editing phonebook 2 Start transferring the phonebook. To transfer the phonebook If the connected Bluetooth mobile phone is compatible with Phone Book Access Profile (PBAP), you can transfer the phonebook of the mobile phone to the unit. To delete contact from the phonebook 1 Display the window. (See the far left column.) 2 Display the screen. 1 Display the phone book (1), then display the window (2).
BLUETOOTH Settings for Bluetooth mobile phone You can change various settings for using Bluetooth mobile phones on the screen. 1 Display the screen. (Page 42) 2 Display the screen. • You can also display the screen by touching [ ] on the phone control screen. (Page 45) 3 Configure the Bluetooth settings (1), then confirm the adjustments (2).
BLUETOOTH Operation buttons • Available buttons on the screen and operations differ depending on the connected device. Displays the other operation button [ ] window. • To hide the window, touch [ ]. Selects Repeat playback mode. [ ] • : Repeats the current track/file. • : Repeats all tracks/files in the current folder. • ALL: Repeats the all tracks/files in the device. Selects Random playback mode. [ ]*1 • : Randomly plays all tracks in current folder. • ALL: Randomly plays all tracks in current album.
SETTINGS Settings for using applications of iPod/iPhone/Android/BlackBerry 3 Display the screen. Before using applications of iPod/iPhone/Android/ BlackBerry, select the device to use and connection method. Preparation: Connect iPod touch/iPhone/Android/BlackBerry device. • For Android/BlackBerry: Connect the Android/ BlackBerry device via Bluetooth or both with a cable and via Bluetooth. –– For Bluetooth connection, see page 40. –– For wired connection, see page 72.
SETTINGS Selecting different sources for the front and rear monitors—Zone Control 4 Select the source for front and rear, and adjust the volume for the rear source. You can select different sources for both this unit and an external monitor connected to the VIDEO OUT and AV-OUT AUDIO terminals. (Page 72) 1 Display the source/option selection screen. On the Home screen or the source control screen: [Zone Select] 2 Display the
SETTINGS Sound adjustment—Audio You can adjust the various audio settings on the
SETTINGS ❏❏Using the sound equalization • The adjustment is memorized for each source until you adjust the sound again. If the source is a disc, the adjustment is stored for each of the following categories. –– DVD-Video –– CD/VCD/Audio files/Video files (Page 75) • You cannot adjust the sound when the unit is in standby. 3 Display the preset sound modes (1), then select a sound mode (2).
SETTINGS ❏❏Setting the listening position You can adjust the sound effects according to your listening position. 1 Display the screen. (Page 53) 2 Display the screen. Adjusting the Digital Time Alignment (DTA) Make fine adjustments to the delay time of the speaker output to create a more suitable environment for your vehicle. 4 Touch [Level] (1), then adjust the output volume for each speaker (2). 1 Display the screen. (See the left column.
SETTINGS ❏❏Localizing the sound image—Front Focus 4 Touch [Delay] (1), then adjust the sound image precisely (2). 5 Touch [Level] (1), then adjust the output volume for each speaker (2). You can localize the sound image in front of the selected seat. 1 Display the screen. (Page 55) 2 Touch [Front Focus] (1), then select the listening position to set as the front position (2).
SETTINGS ❏❏Adjusting the volume balance 1 Display the screen. (Page 53) 2 Display the screen. ❏❏Adjusting the volume output according to different sources You can adjust and store the auto-adjustment volume level for each source. The volume level will automatically increase or decrease when you change the source. 1 Display the screen. (Page 53) 2 Display the screen. 3 Adjust the volume balance. 3 Adjust the volume output level for each source.
SETTINGS ❏❏Adjusting the sound effect 1 Display the screen. (Page 53) 2 Display the screen. 3 Adjust each item. *1 58 Selects the bass boost level. • OFF (Initial)/1/2/3 Adjusts loudness. (The LOUD indicator lights up when the loudness is adjusted.) • OFF (Initial)/Low/High Reduces the driving noise by raising the bandwidth.
SETTINGS Adjusts the brightness of the backlight. (−4 to +4) Adjusts the contrast. (−4 to +4) Adjusts the blackness. (−4 to +4) Adjusts the brightness. (−4 to +4) Adjusts the color. (−4 to +4) Adjusts the tint. (−4 to +4) Selects the aspect ratio. • Full: Displays the picture fully. The aspect ratio is changed if necessary. • Normal: Display the picture in the aspect ratio of 4:3.
SETTINGS ❏❏Customizing the background 1 Display the screen. (Page 59) 2 Display the screen. ❏❏Storing your favorite image for the background 5 Rotate the image if necessary (1), then confirm the selection (2). You can set your favorite image stored on the connected USB device. • Use a JPEG file with a resolution of 800 x 480 pixels. • The color of the captured image may look different from that of the actual scene. 1 Connect the USB device on which the image is stored.
SETTINGS Customizing the system settings 4 Select an option. ❏❏Memorizing/recalling the settings • You can memorize the settings changed in the screen and recall the memorized settings any time. • The memorized settings are kept even when the unit is reset. • You cannot perform the operation when [SETUP Memory] is set to [Lock]. Unlock the setting beforehand. 1 Display the source/option selection screen.
SETTINGS ❏❏Adjusting the touch position 4 Display the screen. You can adjust the touch position on the touch panel if the position touched and the operation performed do not match. ❏❏Displaying the menu screen 1 Display the source/option selection screen. 1 Display the source/option selection screen. On the Home screen or the source control screen: On the Home screen or the source control screen: 5 Touch the center of the marks at the lower 2 Display the screen.
SETTINGS ❏❏ setting screen ❏❏ setting screen [APP/iPod SETUP] • APP Connection select: Select the device and connection method. (Page 51) • iPod Connection: Select the connection method of iPod/iPhone. (Page 21) [TV Tuner Control]*1 • ON: Enables control of TV operation on “AV-IN1”. • OFF (Initial): Select this to use “AV-IN1” with components other than TV Tuner. [AV-OUT] You can determine the use of the external component connected to the VIDEO OUT/ AV-OUT AUDIO terminal.
SETTINGS ❏❏ setting screen ❏❏ setting screen [R-CAM Interruption] • ON: Displays the picture from the rear view camera when you shift the gear to the reverse (R) position. • OFF (Initial): Select this when no camera is connected. [Parking Guidelines] • ON (Initial): Displays the parking guidelines to enable easier parking when you shift the gear to the reverse (R) position. • OFF: Hides the parking guidelines. [Guidelines Setup] Adjust the parking guidelines.
REMOTE CONTROLLER Overview Optional Remote Controller KNA-RCDV331 is designed for controlling this unit. Refer to the instruction manual that comes with the remote controller. ◊ Caution: • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result if the Remote Controller falls down and gets wedged under the pedals while driving. • Do not leave the battery near fire or under direct sunlight.
REMOTE CONTROLLER ❏❏DVD/VCD (DVD mode) J/K/H/I S/T I/W Moves the cursor when displaying a menu. Selects a track. Starts/pauses playback. Stops and memorizes the point o where the disc stops. • Specifies the number to search for in direct search. • : Fast forwards/ backwards. –– Fast forward/backward 0–9 speed changes each time you press this key. • : Slow forwards/ backwards during pause. MODE/TOP MENU Shows the disc top menu. FNC/PBC/MENU Shows the disc menu. SUBTITLE Changes the subtitle language.
REMOTE CONTROLLER Using the steering remote controller (Only for DDX8016DABS) You can assign functions to the keys of the remote controller on the steering wheel. • This function is available only when your vehicle is equipped with the electrical steering remote controller. • You can only register/change the functions while you are parked. • If your steering remote controller is not compatible, learning may not be completed and an error message may appear.
CONNECTION/INSTALLATION Before installing the unit ◊ WARNING • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. • Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow). The power supply must be connected to the wires via the fuse.
CONNECTION/INSTALLATION ❏❏Supplied accessories for installation 1 2 3 4 5 6 7 Wiring harness × 1 Trim plate × 1 Extraction keys × 2 USB extension cable (1.0 m) × 1 GPS antenna (3.5 m) × 1 Metal plate × 1 Microphone (3 m) × 1 ❏❏Installation procedure 1 To prevent a short circuit, remove the key 2 3 4 5 6 7 from the ignition and disconnect the “ battery. Make the proper input and output wire connections for each unit. Connect the speaker wires of the wiring harness.
CONNECTION/INSTALLATION Connection ❏❏Connecting wires to terminals * Only for DDX8016DABS. Connect GPS antenna (5). (Page 73) Page 73 Page 72 Page 72* Page 72 VIDEO OUT Page 72 REAR VIEW CAMERA FRONT VIEW CAMERA Connect the USB extension cable (4). (Page 71) Page 72* AV-IN Page 72* Page 72* Page 72 Connect the antenna cord to the antenna terminal.
CONNECTION/INSTALLATION ❏❏Connecting the USB extension cable ❏❏Connecting an iPod/iPhone Connect the USB extension cable (4) to connect a USB device/iPod/iPhone/smartphone. 1.0 m USB device/iPod/iPhone/smartphone • Connect the USB extension cable (4) beforehand. (See the left column.) iPod/iPhone (30-pin connector models) (commercially available) 4 ❏❏Connecting a USB device • Connect the USB extension cable (4) beforehand. (See above.) USB device* (commercially available) 1.
CONNECTION/INSTALLATION ❏❏Connecting a smartphone/Android device • Connect the USB extension cable (4) beforehand. (Page 71) ❏❏Connecting external components VIDEO OUT DDX9716BTS DDX9716BTSR REAR VIEW CAMERA FRONT VIEW CAMERA Smartphone/Android device (commercially available) 1 2 3 4 5 6 DDX8016DABS AV-IN Micro USB 7 8 9 p Micro USB to USB cable (commercially available) q w 1.
CONNECTION/INSTALLATION ❏❏Connecting microphone for Bluetooth ❏❏Connecting the GPS antenna Connect the microphone (7) to the MIC terminal. • To install the microphone, peel off the adhesive tape, fix it on the installation position, then adjust the direction of the microphone to face the driver. After installing, fix the microphone cable to the car with clamps (commercially available). –– Clean the installation surface beforehand. Connect the GPS antenna (5) to the GPS terminal.
CONNECTION/INSTALLATION Removing the unit ❏❏Removing the trim plate 1 Engage the catch pins on the extraction key (3) and remove the two locks on the lower part. Lower the frame and pull it forward. ❏❏Removing the unit 1 Remove the trim plate. (See the left column.) 2 Insert the two extraction keys (3), then pull them as illustrated so that the unit can be removed. 2 3 3 2 Remove from the upper two catches. • The frame can be removed from the top side in the same manner.
REFERENCES Maintenance ❏❏Caution on cleaning the unit Do not use any solvent (for example, thinner, benzine, etc.), detergent, or insecticide. This may damage the monitor or the unit. Recommended cleaning method: Gently wipe the panel with a soft, dry cloth. ❏❏Moisture condensation Moisture may condense on the lens inside the unit in the following cases: • After starting the heater in the car. • If it becomes very humid inside the car. Should this occur, the unit may malfunction.
REFERENCES Playing MP3/WMA/WAV/AAC-LC/FLAC/Vorbis files • This unit can play back files with the extension code <.mp3>, <.wma>, <.wav>, <.m4a>, <.flac> or <.ogg> (regardless of the letter case—upper/ lower).
REFERENCES Unplayable discs • Unplayable disc types and formats are as follows: –– DVD-Audio/DVD-ROM/DVD-VR discs –– DivX/DVD+VR/DVD-RAM recorded on DVD-R/ RW or +R/+RW –– SVCD (Super Video CD), CD Text (CD-DA), CDROM, CD-I (CD-I Ready), DTS-CD –– MPEG1/MPEG2/MPEG4/WMV/MKV recorded on CD-R/RW • Discs that are not round. • Discs with coloring on the recording surface or discs that are dirty. • Recordable/Rewritable discs that have not been finalized. • 8 cm discs.
REFERENCES • For some iPod/iPhone models, the performance may be abnormal or unstable during operation. In this case, disconnect the iPod/iPhone device, then check its condition. If the performance is not improved or slow, reset your iPod/iPhone. • When you turn on this unit, the iPod/iPhone is charged through the unit. • The text information may not be displayed correctly.
REFERENCES Error message list If an error occurs while using the unit, a message appears. Take appropriate action according to the following message/remedy/cause list. “No Signal”/“No Video Signal”: • Start playback on the external component connected to the AV-IN1 or iPod/AV-IN2 input terminal (DDX8016DABS) or AV-IN/iPod input terminal (DDX9716BTS/DDX9716BTSR). • Check the cords and connections. • Signal input is too weak. “There is an error in the speaker wiring. Please check the connections.
REFERENCES ❏❏Discs ❏❏USB Recordable/Rewritable discs cannot be played back. • Insert a finalized disc. • Finalize the discs with the component which you used for recording. “Reading” does not disappear from the screen. • Turn the power off and on again. Tracks on the Recordable/Rewritable discs cannot be skipped. • Insert a finalized disc. • Finalize the discs with the component which you used for recording. Playback does not start. • The format of files is not supported by the unit.
REFERENCES ❏❏Digital Radio (DAB) (only for DDX8016DABS) Cannot receive an ensemble. • Your area is not covered by the ensemble. The DAB aerial is not properly extended or positioned. • Adjust the aerial and try the ensemble scanning again. • Connect an active aerial (not supplied). ❏❏AV-IN No picture appears on the screen. • Turn on the video component if it is not on. • Connect the video component correctly.
REFERENCES Specifications ❏❏Monitor section Picture Size (W × H) DDX9716BTS/DDX9716BTSR: 6.95 inches (diagonal) wide 156.6 mm × 81.6 mm DDX8016DABS: 6.2 inches (diagonal) wide 137.5 mm × 77.2 mm Display System Transparent TN LCD panel Drive System TFT active matrix system Number of Pixels 1 152 000 (800H × 480V × RGB) Effective Pixels 99.99 % Pixel Arrangement RGB striped arrangement Back Lighting LED ❏❏DVD player section ❏❏USB interface section D/A Converter Audio Decoder USB Standard USB 2.
REFERENCES ❏❏DSP section ❏❏FM radio section Graphics equalizer BAND 13 Band Frequency (Hz) (BAND1-13) 62.5/100/160/250/400/630/1k/ 1.6k/2.5k/4k/6.3k/10k/16k Gain –9/–8/–7/–6/–5/–4/–3/–2/ –1/0/1/2/3/4/5/6/7/8/9 dB Frequency Range (50 kHz) 87.5 MHz to 108.0 MHz 2 Way X'Over HIGH PASS FILTER frequency (Hz) Through/30/40/50/60/70/80/90/ 100/120/150/180/220/250 SLOPE –6/–12/–18/–24 dB/Oct. LOW PASS FILTER frequency (Hz) 30/40/50/60/70/80/90/100/120/ 150/180/220/250/Through SLOPE –6/–12/–18/–24 dB/Oct.
REFERENCES ❏❏Video section ❏❏General ❏❏Trademarks and licenses Color System of External Video Input NTSC/PAL Operating Voltage External Video Input Level (mini jack) 1 Vp-p/75 Ω Maximum Current Consumption 15 A External Audio Max Input Level (mini jack) 2 V/25 kΩ Video Output Level (RCA jack) 1 Vp-p/75 Ω Installation Dimensions (W × H × D) DDX9716BTS/DDX9716BTSR: 182 mm × 112 mm × 162 mm DDX8016DABS: 182 mm ×112 mm ×153 mm Audio Output Level (mini jack) 1.
REFERENCES • BlackBerry®, RIM®, Research In Motion® and related trademarks, names and logos are the property of Research In Motion Limited and are registered and/or used in the U.S. and countries around the world. Used under license from Research In Motion Limited. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
REFERENCES • libvorbis Copyright (c) 2002-2008 Xiph.org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: –– Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Declaration of Conformity with regard to the EMC Directive Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer: JVC KENWOOD Corporation 3-12 Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan EU Representative: JVCKENWOOD NEDERLAND B.V.
Spotify With Spotify, your music is everywhere. Working out, partying or relaxing, the right music is always at your fingertips. There are millions of songs on Spotify— from old favorites to the latest hits. Just choose the music you love, or let Spotify surprise you. You can stream Spotify from connected iPod touch/iPhone or Android devices. • Install the latest version of the Spotify application on your iPod touch/iPhone/Android and create an account.
Spotify ❏❏Creating your station (Start Radio) ❏❏Selecting a track 1 1 Display the list selection screen. 2 Select the list type (//) (1), then select a desired item (2). desired track. The playback of your station starts with the selected track. • You can personalize your station using thumb up ([ ]) or thumb down ([ ]). • Press [ • Press [ ] to return to the top layer. ] to return to the upper layer.