DIGITAL MEDIA RECEIVER KIV-700 INSTRUCTION MANUAL Before reading this manual, click the button below to check the latest edition and the modified pages.
Contents Before Use 3 Component Names and Functions 4 General Operation 5 Exit of the Demonstration Mode Power and Source Select Volume Menu List Operation iPod/iPhone Operation 6 Basic Operation Selecting a Song by Browsing iPod Play Mode iPod Setting Selecting the Search Mode Direct Search Related Search Alphabet Search Skip Search My Playlist USB device/ Internal Memory Operation 14 Basic Operation File Search Skip Search Play Mode Direct Music Search USB Setting Copying from USB device Delet
Before Use 2WARNING To prevent injury or fire, take the following precautions: • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Do not use this unit before canceling Demonstration mode This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode.
Component Names and Functions 1 2 8 9 3 4 Rear view AUX 5 6 7 1 [MENU] button To select a song or set functions. See
General Operation Exit of the Demonstration Mode Menu List Operation Turn off the demonstration mode when you use it for the first time after installation. The basic operating procedure for using this function is described below. The individual function items are covered in the operating procedures. Press the [Volume] knob to quit the demonstration mode when the message “To Cancel DEMO Press the volume knob” is displayed (approx. 15 seconds).
iPod/iPhone Operation SRC MENU Volume DISP SEARCH MODE TI Basic Operation Playing iPod • Connect an iPod When connected, the source is switched automatically and a song starts playing. • Select iPod source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select the “iPod” display. ✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source. Song Select Press the [4] or [¢] button.
Selecting a Song by Browsing iPod Display “Music” “Playlists” “Artists” “Albums” “Songs” “Podcasts” “Genres” “Composers” “Audiobooks” “Videos”*1 “Video Playlists” “Movies” “Music Videos” “TV Shows” “Video Podcasts” “Rentals” Items Playlists Artists Albums Songs Podcasts Genres Composers Audio books move to the first hierarchy, select a Menu item, and set it’s parameters. • Characters which cannot be displayed are left blank.
iPod/iPhone Operation Play Mode • This mode is not compatible with music information display. The display will show “iPod By Hand Mode”. • iPod can be operated when it conforms to the iPod control function. • When you cancel the hand mode while playing a video file, the video file stops and a music file starts. You can select a Play Mode, such as Random play and Repeat play. 1 2 Select iPod source 3 Turn the [Volume] knob and press it when the desired item is displayed. Select “Play Mode”.
Selecting the Search Mode You can select the most suited search method for the desired song. Search mode in Normal playing Display “Direct Search” “Related Search” “Recall My Playlist” “Delete My Playlist” “Register My Playlist” Overview You can quickly search the desired song by specifying its Search item (artist, album, etc.) and character. Refer to (page 10). Searches for music of the same artist or genre as the one being played. (Music only) Refer to the (page 10).
iPod/iPhone Operation Direct Search ⁄ You can quickly search the desired song by specifying its Search item (artist, album, etc.) and character. • Characters that can be entered are alphabetical characters (A to Z), numerical characters (0 to 9), and “ * ”. • “ * ” indicates characters other than alphabetical and numerical characters. You cannot enter any more characters when entering “ * ” in the first character position.
Alphabet Search Skip Search You can select a song by alphabet. This function searches songs whose name contain the specified character(s) in the list of the selected Search item (artist, album, etc). You can scroll up or down according to the number of the selected Search items so that you can quickly switch the display position. 1 2 Select iPod source Enter browsing mode Press the [MENU] button. Turn the [Volume] knob and press it when the desired item is displayed.
iPod/iPhone Operation My Playlist Allows you to register your favorite songs in the Playlist of this unit. You can register up to 30 songs in the Playlist. Deleting a Song from the Playlist 1 2 Press the [SEARCH MODE] button. 3 Turn the [Volume] knob and press it when the desired item is displayed. Select ”Delete One” or ”Delete All”. Selecting “Delete All” moves to step 5 and all songs are deleted. 4 Turn the [Volume] knob and press it when the desired item is displayed.
English | 13
USB device/ Internal Memory Operation SRC MENU Volume 4 38 ¢ DISP SEARCH MODE When connecting the USB device, usage of the CA-U1EX (option) is recommended. TI Basic Operation Playing USB device • Connect a USB device When connected, the source is switched automatically and a song starts playing. • Select USB/ Internal memory source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select the “USB” or “Int.Mem.” display.
File Search Selecting the file you want to listen to from the device being played now. USB device/ Internal memory source Display “USB List”/ “Internal Memory List” Items Folder or file name list. press the [MENU] button for at least 1 second to move to the first hierarchy. Remarks • Displaying picture files The playback of audio file continues even when a picture file is selected during playback. Pressing the [4] or [¢] button switches between picture files.
USB device/ Internal Memory Operation Play Mode Function of remote control You can select a Play Mode, such as Random play and Repeat play. Searching the music by entering the file number. 1 2 Select USB/ Internal memory source 3 Turn the [Volume] knob and press it when the desired item is displayed. Select “Play Mode”. 4 Select the setting item Turn the [Volume] knob and press it when the desired item is displayed. Enter Menu List mode Press the [MENU] button.
(]Int Mem) ¡! ¡CD000_001 ⁄ ¡" ]CD001 ¡# • The setting of “Skip Search” in (page 8) ¡CD001_003 and ¡P that in (page 16) are always the same. Changing the setting of one reflects the other. ¡CD001_010 CD ✍✍Cancelling copy 1. Press the [Volume] knob. 2. Turn the [Volume] knob and press it when the desired item is displayed. Select “YES”. 7 Function of USB source Copying from USB device Copy files and folders from USB device to internal memory.
USB device/ Internal Memory Operation Function of Internal memory source Deleting file or folder Deleting Files in Memory 1 2 Select Internal memory source 3 Enter Delete mode Turn the [Volume] knob and press it when the desired item is displayed. Select “Settings” > “Internal Memory Delete”. 4 Select a file or folder to delete Deleting Files in Memory. Display “Settings” “Internal Memory Delete” “Internal Memory Format” Items Delete a folder or file.
Function of USB or Internal memory source Function of USB or Internal memory source Picture File Viewing Wallpaper Downloading You can select and view a picture file in the device. You can use downloaded picture for the display of this unit. 1 2 Select USB or Internal memory source Select a picture file See (page 15) and select a picture file to be displayed. 1. Press the [MENU] button. 2. Turn the [Volume] knob and press it when the desired item is displayed.
Disc Changer Control (Optional) SRC MENU Volume DISP SEARCH MODE Play Mode You can select a Play Mode, such as Random play and Repeat play. 4 38 ¢ 1 2 Select CD changer source 3 Turn the [Volume] knob and press it when the desired item is displayed. Select “Play Mode”. 4 Select the setting item Turn the [Volume] knob and press it when the desired item is displayed. Basic Operation Select CD changer source Press the [SRC] button.
Function of remote control Direct Music Search Searching the music by entering the track number. 1 Enter Direct Music Search mode Press the [DIRECT] button on the remote control. 2 Enter the music number Press the number buttons on the remote control. 3 Search the music Press the [4] or [¢] button. Cancelling Direct Music Search Press the [DIRECT] button. ⁄ • Direct Music Search cannot be performed during playing of Random play or scan play.
Tuner Operation Display example of information display mode SEARCH MODE SRC MENU Volume 1 4 ¢ TI 2 1 Station information (see (page 34)) 2 Status indicator (see (page 64)) Basic Operation Selecting Tuner source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select the “TUNER” display. ✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source.
“Auto TP Seek” 5 6 Sets whether to switch to the station only in the specific region using the “AF” control. “ON”/ “OFF” When traffic information station reception is poor, automatically searches for a station that can be received better. “ON”/ “OFF” Station Preset Memory 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory ( 2 Enter Menu List mode Press the [MENU] button.
Tuner Operation Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the radio band you wish to store in the preset memory 2 Enter Menu List mode Press the [MENU] button. 3 Enter Auto Memory Entry mode Turn the [Volume] knob and press it when the desired item is displayed. Select “Settings” > “Auto Memory”. 4 Open Auto Memory Entry Turn the [Volume] knob and press it when the desired item is displayed. Select “YES”.
PTY (Program Type) Program Type Preset Selecting the Program Type below and searching for a station. Putting the Program Type in the Preset button memory and quick recall.
Bluetooth Audio Control (Optional) Basic Operation SRC MENU Volume 4 38 ¢ TI Selecting Bluetooth Audio source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select the “BT AUD EXT” display. ✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source. Connecting a Bluetooth Device Pause and play Press the [38] button. Before using the Bluetooth device, you need to connect Bluetooth device to this unit.
English | 27
Operation of Hands-Free Phoning (Optional) DISP SEARCH MODE SRC MENU Volume ⁄ • When registering from this unit, refer to (page 51). • For details on the Bluetooth cell-phone with the hands-free function, see in the instruction manual of the Bluetooth Unit. 4 38 ¢ TI Connecting a Bluetooth Device Before using the Bluetooth device, you need to connect Bluetooth device to this unit. The following 3 steps procedure is necessary. Step 1.
Call Waiting Making a Call Answering Another Incoming Call with the Current Call Suspended Turn the [Volume] knob and press it when the desired item is displayed. Select “Answer”. 1 Enter Bluetooth mode Press the [TI] button for at least 1 second. 2 Select a dialing method Turn the [Volume] knob and press it when the desired item is displayed. Answering another Incoming Call after Terminating the Current Call Press the [SRC] button or press the [TI] button for at least 1 second.
Operation of Hands-Free Phoning (Optional) Calling a Number in the Phone Book Dial a Number 1 Enter Bluetooth mode Press the [TI] button for at least 1 second. 1 Enter Bluetooth mode Press the [TI] button for at least 1 second. 2 Select the Phone Book mode Turn the [Volume] knob and press it when the desired item is displayed. Select “Phonebook”. 2 Select the number dial mode Turn the [Volume] knob and press it when the desired item is displayed. Select “Number Dial”.
Make a Voice Dialing Call 1 Enter voice recognition mode Press the [VOL] button for at least 1 second. 2 “Phonebook Name?” is displayed. When a beep is heard, say the name within 2 seconds. 3 “Phonebook Type?” is displayed. When a beep is heard, say the category name within 2 seconds.
Display Settings SRC MENU Volume DISP Display “Settings” “Display & Illumination” “Display Select” “Display Off Mode” Switching display Press the [DISP] button. Artwork large Video *1 Information Clock Display Type Displays song information. (Only for iPod/ USB/ Internal Memory source) Displays artwork and song information, etc., separately. (Only for iPod/ USB/ Internal Memory source) Displays video of a video file. (Video file only) Displays station information, etc.
Illumination Color Selection Customization of Clock Display Selecting the Illumination Color of the panel. You can customize the display of the Clock Display mode. 1 Enter Menu List mode Press the [MENU] button. 2 Enter Illumination color selection mode Turn the [Volume] knob and press it when the desired item is displayed. Select “Settings” > “Display & Illumination” > “Key Color Select”.
Display Settings Customization of Display You can customize the display of the Artwork small, Artwork large, or Information mode. 1 Select the source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. ✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source. 2 Enter Menu List mode Press the [MENU] button.
Information Music title Folder name File name Display “TITLE***” “FLD***” “FILE***” Auxiliary Input Display Setting Selecting the display when changing to Auxiliary input source. 1 Select the AUX source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select the “AUX” display. ✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source. 2 Enter Menu List mode Press the [MENU] button.
Clock and Other Functions SRC MENU Volume Clock and Date Adjustment 5 Select Summer Time Turn the [Volume] knob and press it when the desired item is displayed. Select “Summer Time” > “ON” or “OFF”. 6 Enter Date adjustment mode Turn the [Volume] knob and press it when the desired item is displayed. Select “Date Adjust”. 7 Adjusting Date 1. Turn the [Volume] knob and press it when the desired item is displayed. Select month, day or year. 2.
Initial Settings “Built in AUX” hen this is set to ON, AUX source can be W selected. “ON”: Allows AUX source to be selected. Use this setting when the built-in AUX terminal is connected to the external equipment all the time. “OFF”: Disable AUX source selection. Use this setting when the built-in AUX terminal is not used. “Favorite Delete” Deletes Favorite Preset Memory. Refer to (page 49). “Built in AMP” Selecting “OFF” turns off the built-in amplifier.
Clock and Other Functions Demonstration Mode Setting Activating Security Code Turning the demonstration mode ON/OFF. ⁄ 1 Enter Menu List mode Press the [MENU] button. 2 Enter Demonstration mode setting Turn the [Volume] knob and press it when the desired item is displayed. Select “DEMO Mode”. • You can set the Security Code with a 4 digit number of your choice. • The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up.
Entering Security Code The Security Code is required to use the audio unit when the unit is first used after removed from the battery power source or the Reset button is pressed. 1 2 Turn the power ON. Do the step 4 through 5 operation, and enter the Security Code. “Approved” is displayed. Now, you can use the unit. Deactivating Security Code To deactivate the Security Code function. 1 Select the Standby Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed.
Audio Adjustments “2Zone Select” Sets the Dual Zone System. “2Zone Front/Rear” - Dual Zone System (page 43). “Preset” Sets the audio preset. - Audio Preset Recall (page 47). - Audio Preset Memory (page 46). SRC MENU Volume ( 1 Select the source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select a source other than “STANDBY”. ✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source.
Preset Equalizer Curve Select Manual Equalizer Control You can select following Equalizer curve. You can adjust following Equalizer Control items. Display “Natural” “User” “Rock” “Pops” “Easy” “Top40” “Jazz” “Game” “iPod” Equalizer curve Natural User* Rock Pops Easy Top 40 Jazz Game iPod (During iPod source only) * The Equalizer curve set in the section is recalled. 1 Enter Audio Control mode Press the [Volume] knob.
Audio Adjustments Listening Position Selection Listening Position Fine Adjustments The sound environment can be compensated in accordance with the selected position. According to the listening position, select the position from the following settings. Making fine adjustment of the value specified at Preset position selection per speaker. Compensation seat Not compensating. Front-Left seat Front-Right seat Front seat Display “ALL” “FL” “FR” “F ALL” 1 Enter Audio Control mode Press the [Volume] knob.
Dual Zone System The separate sources can be selected for Front channel and Rear channel. Display Overview “2Zone Rear Volume”*1 Adjust the volume of Rear channel. “0” — “35” “Detailed Setup” “2Zone Select” The Dual Zone System is enabled by selecting a sub source. “OFF”/ “USB” (“iPod”)/ “INT MEM”/ “AUX” “2Zone Front/Rear”*1 Specifies the destination of sub source sound when the Dual Zone function is turned on. “Rear”/ “Front” ( : Factory setting) *1 The Dual Zone System is enabled.
DSP Setup SRC MENU Volume Speaker Setting The speaker X’Over is automatically set when the position and size of each speaker are selected from the following items. Speaker “FRONT” Item “Location” “Size” Car Type Selection You can compensate the delay of the sound arrival time by selecting your environment from the following car types. Display “Off” “Compact” “Sedan” “Wagon” “Minivan” “SUV” “Passenger Van” “Tweeter” “REAR” Overview Not compensating.
5 Car Type Fine Adjustments Adjusting fine tuning of the speaker position compensation value specified at (page 44). Display “Front” “Rear” “SW” Item Front speaker Rear speaker Subwoofer Exit Audio Control mode Press the [MENU] button for at least 1 second. Range 0 – 440 cm 0 – 440 cm 0 – 440 cm 1 Enter Audio Control mode Press the [Volume] knob. 2 Enter Car Type Adjustment mode Turn the [Volume] knob and press it when the desired item is displayed.
DSP Setup X’Over Setting Audio Preset Memory Fine adjusting the following setting values corresponding to the X’Over values set in the section (page 44). Registering the value setup by Sound Control.
Audio Preset Recall Recalling the sound setup registered by
Favorite Control • If the contents in iPod are changed after the FAVORITE registration, the list registered in this unit becomes different from that in iPod. In this case, perform the FAVORITE registration again. FAV SRC MENU Volume Favorite Preset Recall Retrieving an item registered to Favorite. Favorite Preset Memory Registering the operation procedure to select your favorite broadcast station or iPod Playlists/ Artists, etc.
Favorite Preset Memory Delete Deleting an item registered to Favorite. 1 Select the Standby Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select the “STANDBY” display. ✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source. 2 Enter Menu List mode Press the [MENU] button. 3 Enter Favorite Preset Memory Delete mode Turn the [Volume] knob and press it when the desired item is displayed.
Bluetooth Setup (Optional) “Bluetooth HF/ You can specify output speakers for hands-free Audio” voice communication and Bluetooth audio sound. “Front”: Outputs voice from the front speakers. “All”: Outputs voice from the front and rear speakers. “Call Beep” You can output a beep from the speaker when a call comes in. “ON”: Beep is heard. “OFF”: Beep is canceled. “BT F/W Update” Display the version of the firmware of this unit. “Mic Gain”*1 Adjust the sensitivity of the microphone for a telephone call.
Registering Bluetooth Device To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to 5 Bluetooth devices to this unit. Registering from this unit 1 Enter Bluetooth mode Press the [TI] button for at least 1 second. 2 Enter Bluetooth device registration mode Turn the [Volume] knob and press it when the desired item is displayed. Select “BT Settings” > “Detailed Setup” > “Device Registration”. Search for the Bluetooth device.
Bluetooth Setup (Optional) Registering PIN Code By operating the Bluetooth device, specify the PIN code necessary for registering this unit. 1 Enter Bluetooth mode Press the [TI] button for at least 1 second. 2 Enter PIN code edit mode Turn the [Volume] knob and press it when the desired item is displayed. Select “BT Settings” > “Detailed Setup” > “PIN Code Edit”. The current setting of PIN code is displayed. 3 4 5 Input the PIN code 1.
Deleting a Registered Bluetooth Device You can delete a registered Bluetooth device. 1 Enter Bluetooth mode Press the [TI] button for at least 1 second. 2 Enter Bluetooth device deletion mode Turn the [Volume] knob and press it when the desired item is displayed. Select “BT Settings” > “Detailed Setup” > “Device Delete”. “(name)” is displayed. 3 Select the Bluetooth device Turn the [Volume] knob. 4 Delete the selected Bluetooth device Press the [Volume] knob.
Bluetooth Setup (Optional) Adding a Voice Dialing Command Add a voice tag to the phone book for voice dialing. You can register up to 35 voice tags. 1 Enter Bluetooth mode Press the [TI] button for at least 1 second. 2 Enter Phone book name edit mode Turn the [Volume] knob and press it when the desired item is displayed. Select “BT Settings” > “Voice Tag” > “Phonebook Name Edit”.
Setting a Voice Command for Category Add a voice tag to the phone number category (type) for voice calling. 1 Enter Bluetooth mode Press the [TI] button for at least 1 second. 2 Enter Phone Number type edit mode Turn the [Volume] knob and press it when the desired item is displayed. Select “BT Settings” > “Voice Tag” > “Phonebook Type Edit”. 3 Select the category (type) you wish to set Turn the [Volume] knob and press it when the desired item is displayed.
SMS (Short Message Service) (Optional) SRC MENU Volume DISP Display the SMS The SMS arrived at the cell-phone is displayed on the receiver. A newly arrived message is displayed. ¤ TI Downloading the SMS Download the short message (SMS) arrived at the cell-phone so that it can be read on this unit. 1 Enter Bluetooth mode Press the [TI] button for at least 1 second. 2 Enter SMS download mode Turn the [Volume] knob and press it when the desired item is displayed. Select “BT Settings” > “SMS Download”.
English | 57
Basic Operations of Remote Control In Tuner source VOL SRC • Band select: [FM+]/[AM–] • Station select: [4]/[¢] • Recall preset stations: [1] — [6] ATT ENT/ 38 5/∞ EXIT AUD AM– FM+ 0—9 DIRECT (page 16, 21, 21, 24, 30) General control • Volume control: [VOL] • Source select: [SRC] • Volume reduce: [ATT] When the button is pressed again, the volume returns to the previous level.
Preparing the remote control unit Hands-free phone control Making a call • Enter the dialing method selection mode: [ • Select a dialing method: [ENT] • Number dial input: Input a digit: [0] – [9] Input “+”: [¢] Input “#”: [FM+] Input “*”: [AM–] Clear the entered phone number: [4] • Make a call: [DIRECT] ] Receiving a call • Answer the call: [ ] • Switch between the private talk mode and the hands-free talk mode: [ENT] Call waiting • Answer Another Incoming Call with the Current Call Suspended: [ ] • Ans
Appendix About Audio file • Playable Audio file AAC-LC (.m4a) MP3 (.mp3) WMA (.wma) Linear PCM (WAV) (.wav) • Playable USB device USB mass storage class • Playable USB device file system FAT16, FAT32 Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device. • Playing order of the Audio file In the example of folder/file tree shown below, the files are played in the order from ① to ⑩.
About USB device • When the USB device is connected to this unit, it will be charged from the unit when the unit is turned on. • Install the USB device in the place where it will not prevent you from driving your vehicle properly. • Take backups of the audio files used with this unit. The files can be erased depending on the operating conditions of the USB device. We shall have no compensation for any damage arising out of erasure of the stored data. • No USB device comes with this unit.
Appendix Menu List Common function items Display “Settings” “Clock & Date” “Clock Adjust” “Time Synchronized” “Summer Time” “Sub Clock Adjust” “Date Adjust” “Date Mode” “Display & Illumination” “Display Select” “Type Select” “Side Select” “Text Select” “Graphic Select” “Display Off Mode” “Display Dimmer” “Text Scroll” “Key Color Select” “Key ILLUMI Dimmer” “ILLUMI Effect” “ILLUMI Music SYNC” “Aspect Set” “Monitor Setup” “RDS Setting” “News” “AF” “RDS Regional” “Auto TP Seek” “DEMO Mode” Page – 36 – – 34,
Function items appearing when the USB source is selected Display Page “USB List” 15 “Copy from USB” 17 “Play Mode” 16 “File Scan” “Folder Random” “All Random” “File Repeat” “Folder Repeat” “Port Up” 14 “Drive Select” 14 “Slide” 19 “Save as Wallpaper” 19 “Settings” – “Device F/W Version” 16 “Device F/W Update” “Clock & Date” – “Display & Illumination” – “RDS Setting” – Function items appearing when the Music Editor media source is selected Display Page “Music” 15 “Playlists” “Artists” “Albums” “Songs” “Genre
Appendix Function items appearing when an AUX source is selected Display Page “Settings” – “Name Set” 35 “Clock & Date” – “Display & Illumination” – “RDS Setting” – Function items appearing when an Hands-Free source is selected Display Page “Preset Call” 29 “Phonebook” 30 “In Call” 30 “Out Call” “Missed Call” “SMS Inbox” 56 “Number Dial” 30 “BT Settings” – “Phone Selection” 52 “Audio Selection” “SMS Download” 56 “Voice Tag” 54 “Detailed Setup” – “Device Registration” 51 “Special Device Select” “Device Delet
Time zone list Continent Area City Continent City Hawaii Alaska Pacific Time Arizona Mountain Time Central Time Eastern time Indiana Atlantic Time Mid-Atlantic W.Central Africa Abu Dhabi Adelaide Amman Amsterdam Anchorage Ankara Athens Atlanta Auckland Baghdad Baku Bangkok Beijing Beirut Berlin Bogotá Brasilia Brussels Bucharest Budapest Buenos Aires Cairo Cape Verde Is.
Appendix This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State. Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) roducts and batteries with the symbol P (crossed-out wheeled bin) cannot be disposed as household waste.
Accessories/ Installation Procedure Accessories 3 1 ..........1 2 • 2 m ..........1 4 ..........2 • • 2.5 m ..........1 • be linked with the ignition (i.e., it will not turn on and off along with the ignition). If you want to link the unit’s power with the ignition, connect the ignition wire to a power source that can be turned on and off with the ignition key. Use a commercially available conversion connector if the connector does not fit in the vehicle connector.
Connecting Wires to Terminals USB device (commercially available) For the sake of safety, be sure to connect the parking sensor. Connect to the vehicle’s parking brake detection switch harness. not remove the cap when you do not use ⁄ Do the USB cable. The connector will cause the ⁄ unit to malfunction if it gets in touch with any metallic part of the vehicle.
Connector Function Guide Pin Numbers for ISO Connectors External Power Connector A-4 A-5 A-6 A-7 A-8 Cable Colour Functions Yellow Blue/White Orange/White Red Black Battery Power Control Dimmer Ignition (ACC) Earth (Ground) Connection Speaker Connector B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black Rear Right (+) Rear Right (–) Front Right (+) Front Right (–) Front Left (+) Front Left (–) Rear Left (+) Rear Left (–) 2WARNING Connecting the ISO
Installation/Removing the Unit Installation Removing the hard rubber frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level. Lift up and pull the frame forward as shown in the figure. Lock Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Accessory 2 Removal tool ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! ! ! • Cannot set up the subwoofer. • No output from the subwoofer. • Cannot set up the subwoofer position of Manual position setting. ▲ • The Dual zone function is enabled. (page 43) • In the speaker select option, None is selected for the subwoofer. (page 44) • Cannot set up the equalizer. • Cannot set up the Bass Boost.
Troubleshooting Guide Hands-free ? The hands-free talk volume is low. The hands-free talk volume is set at a low level. The hands-free talk volume can be adjusted independently. Adjust it during hands-free talk. “Mic Gain” and “Noise Reduction” (page 50). ? No sound is heard from the rear speakers. You are talking in the hand-free talk mode. No sound is heard from the rear speakers in the hands-free talk mode. ? No beep is heard at reception of an incoming call.
No Media File/Error 15: • The connected USB device contains no playable audio file. • Media was played that does not have data recorded that the unit can play. USB ERROR: iPod Error: HF Error 07: Some trouble may have occurred to the connected USB device. Remove the USB device, then cycle the power switch to ON. If the same display is repeated, use another USB device. The memory cannot be accessed. Turn off the power and on again.
Specifications FM tuner section Frequency range (50 kHz space) : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 0.7 μV/75 Ω Quieting Sensitivity (S/N = 46dB) : 1.6 μV/75 Ω Frequency response (±3.
Audio/ Video section Maximum output power : 50 W x 4 Output power (DIN 45324, +B=14.4V) : 30 W x 4 Speaker Impedance : 4 – 8 Ω Tone action BAND1 (62.5 Hz): ±9 dB BAND2 (250 Hz): ±9 dB BAND3 (1 kHz): ±9 dB BAND4 (4 kHz): ±9 dB BAND5 (16 kHz): ±9 dB Preout level / Load (CD/CD-CH) : 4000 mV/10 kΩ Preout impedance : ≤ 600 Ω iPod terminal Video output level : 1 Vp-p (75 Ω) Audio output level : 1.
Declaration of Conformity with regard to the EMC Directive 2004/108/EC Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative's: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands For Turkey Bu ürün 26891sayılı Resmi Gazete’de yayımlanan Elektrikli ve Elektronik Eşyalarda Bazı Zararlı Maddelerin Kullanımının Sınırlandırılmasına Dair Yönetmeliğe uygun olarak üretilmiştir.