DIGITAL MEDIA RECEIVER KIV-BT900 KIV-700 INSTRUCTION MANUAL Before reading this manual, click the button below to check the latest edition and the modified pages. Check the latest edition Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new Digital Media-receiver.
Contents Before Use 3 Component Names and Functions 4 General Operation 5 Exit of the Demonstration Mode Power and Source Select Volume Menu List Operation iPod/iPhone Operation 6 Basic Operation Selecting a Song by Browsing iPod Play Mode iPod Setting Selecting the Search Mode Direct Search Related Search Alphabet Search Skip Search My Playlist USB device/ Zune/ Internal Memory Operation 14 Basic Operation File Search Skip Search Play Mode Direct Music Search USB Setting Copying from USB device D
Before Use 2WARNING To prevent injury or fire, take the following precautions: • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Do not use this unit before canceling Demonstration mode This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode.
Component Names and Functions 1 2 9 10 3 4 5 Rear view AUX 6 7 8 1 [MENU] button To select a song or set functions. See
General Operation Exit of the Demonstration Mode Menu List Operation Turn off the demonstration mode when you use it for the first time after installation. The basic operating procedure for using this function is described below. The individual function items are covered in the operating procedures. Press the [Volume] knob to quit the demonstration mode when the message “To Cancel DEMO Press the volume knob” is displayed (approx. 15 seconds).
iPod/iPhone Operation SRC MENU Volume DISP SEARCH MODE iPod VIDEO IN iPod AUDIO IN 4 38 ¢ iPod AUDIO OUT iPod VIDEO OUT / PLAY MODE Basic Operation ⁄ Playing iPod • For more details on USB HUB, see (page 67). • Connect an iPod When connected, the source is switched automatically and a song starts playing. • Select iPod source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select the “iPod” display.
Selecting a Song by Browsing iPod Display “Music” “Playlists” “Artists” “Albums” “Songs” “Podcasts” “Genres” “Composers” “Audiobooks” “Videos”*1 “Video Playlists” “Movies” “Music Videos” “TV Shows” “Video Podcasts” “Rentals” Items Playlists Artists Albums Songs Podcasts Genres Composers Audio books Video Playlists Movies Music Videos TV Shows Video Podcasts Rentals mode after searching a song, the memorized position is displayed.
iPod/iPhone Operation Play Mode You can select a Play Mode, such as Random play and Repeat play. 1 2 Select iPod source 3 Select the Play Mode Turn the [Volume] knob and press it when the desired item is displayed. Enter Play Mode in the Menu List KIV-BT900: Press the [Volume] knob for at least 1 second. KIV-700: Press the [PLAY MODE] button. ✍✍You can also select from “Play Mode” in Menu List mode.
iPod Setting Selecting the Search Mode You can select following iPod Setting items. You can select the most suited search method for the desired song. 1 2 Select iPod source 3 Turn the [Volume] knob and press it when the desired item is displayed. Select “Settings”. 4 Select the setting item Turn the [Volume] knob and press it when the desired item is displayed. Search mode in Normal playing Enter Menu List mode Press the [MENU] button.
iPod/iPhone Operation Direct Search ⁄ You can quickly search the desired song by specifying its Search item (artist, album, etc.) and character. • Characters that can be entered are alphabetical characters (A to Z), numerical characters (0 to 9), and “ * ”. • “ * ” indicates characters other than alphabetical and numerical characters. You cannot enter any more characters when entering “ * ” in the first character position.
Alphabet Search Skip Search You can select a song by alphabet. This function searches songs whose name contain the specified character(s) in the list of the selected Search item (artist, album, etc). You can scroll up or down according to the number of the selected Search items so that you can quickly switch the display position. 1 2 Select iPod source Enter browsing mode Press the [MENU] button. Turn the [Volume] knob and press it when the desired item is displayed.
iPod/iPhone Operation My Playlist Allows you to register your favorite songs in the Playlist of this unit. You can register up to 30 songs in the Playlist. Deleting a Song from the Playlist 1 2 Press the [SEARCH MODE] button. 3 Turn the [Volume] knob and press it when the desired item is displayed. Select ”Delete One” or ”Delete All”. Selecting “Delete All” moves to step 5 and all songs are deleted. 4 Turn the [Volume] knob and press it when the desired item is displayed.
English | 13
USB device/ Zune/ Internal Memory Operation SRC MENU Volume 4 38 ¢ DISP SEARCH MODE When connecting the USB device, usage of the CA-U1EX (option) is recommended. / PLAY MODE Basic Operation Playing USB device • Connect a USB device When connected, the source is switched automatically and a song starts playing. • Select USB/ Zune/ Internal memory source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select the “USB”, “Zune” or “Int.Mem.” display.
File Search Selecting the file you want to listen to from the device being played now. USB device/ Internal memory source Display Items Folder or file name list.
USB device/ Zune/ Internal Memory Operation Function of Zune/ Music Editor media Skip Search You can scroll up or down according to the number of the selected Search items so that you can quickly switch the display position. 1 2 Select USB or Zune source 3 Enter Skip Search mode Press the [SEARCH MODE] button. 4 Search for item Enter File Search mode Press the [MENU] button. Turn the [Volume] knob and press it when the desired item is displayed. Select “Music” > item.
Function of remote control Direct Music Search Searching the music by entering the file number. 1 Enter Direct Music Search mode Press the [DIRECT] button on the remote control. 2 Enter the music number Press the number buttons on the remote control. 3 Search the music Press the [4] or [¢] button. USB Setting You can select following USB Setting items. 1 2 Select USB source 3 Turn the [Volume] knob and press it when the desired item is displayed. Select “Settings”.
¡! ¡" ¡# ¡CD000_001 ]CD001 ¡CD001_003 ¡Pdevice/ Zune/ Internal Memory Operation USB ¡CD001_010 desired item is displayed. Select “EXIT”. Returns to step 3 if “NEXT” is selected. Function of USB source Copying from USB device Copy files and folders from USB device to internal memory. ¡File1 ^ ] • If a folder is selected, the files in the folder are copied. Sub folders are not copied. • If there is a file or folder with the same name, a message is displayed.
Function of Internal memory source Deleting file or folder Deleting Files in Memory 1 2 Select Internal memory source 3 Enter Delete mode Turn the [Volume] knob and press it when the desired item is displayed. Select “Settings” > “Internal Memory Delete”. 4 Select a file or folder to delete Deleting Files in Memory. Display “Settings” “Internal Memory Delete” “Internal Memory Format” Items Delete a folder or file. Perform format to delete all files stored in internal memory.
USB device/ Zune/ Internal Memory Operation Function of USB or Internal memory source Function of USB or Internal memory source Picture File Viewing Wallpaper Downloading You can select and view a picture file in the device. You can use downloaded picture for the display of this unit. 1 2 Select USB or Internal memory source Select a picture file See (page 15) and select a picture file to be displayed. 1. Press the [MENU] button. 2.
English | 21
Disc Changer Control (Optional) SRC MENU Volume DISP SEARCH MODE Play Mode You can select a Play Mode, such as Random play and Repeat play. 4 38 ¢ 1 2 Select CD changer source 3 Select the setting item Turn the [Volume] knob and press it when the desired item is displayed. / PLAY MODE Basic Operation Select CD changer source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select the “CD CH” display.
Function of remote control Direct Music Search Searching the music by entering the track number. 1 Enter Direct Music Search mode Press the [DIRECT] button on the remote control. 2 Enter the music number Press the number buttons on the remote control. 3 Search the music Press the [4] or [¢] button. Cancelling Direct Music Search Press the [DIRECT] button. ⁄ • Direct Music Search cannot be performed during playing of Random play or scan play.
Tuner Operation SRC MENU Volume SEARCH MODE Tuner Setting You can select following Tuner Setting items. 4 ¢ Basic Operation 1 2 Select Tuner source 3 Turn the [Volume] knob and press it when the desired item is displayed. Select “Settings”. 4 Select the setting item to adjust Turn the [Volume] knob and press it when the desired item is displayed. Selecting Tuner source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select the “TUNER” display.
“Traffic INFO” is displayed and traffic information is received. If the volume is adjusted during reception of traffic information, the adjusted volume is memorized automatically. The memorized volume will be applied next time the Traffic Information function is turned ON. Station Preset Memory Putting a station in the memory. 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory 2 Enter Menu List mode Press the [MENU] button.
Tuner Operation Function of remote control Direct Access Tuning Tuning in a desired radio station by entering the frequency. 1 2 Select the radio band 3 Enter the frequency Press the number buttons on the remote control. Example: Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. “– – – –” is displayed. Desired frequency 92.1 MHz (FM) 810 kHz (AM) 4 Press button [9], [2], [1] [8], [1], [0] Tune in to the entered frequency Press the [4] or [¢] button.
PTY (Program Type) Program Type Preset Selecting the Program Type below and searching for a station. Putting the Program Type in the Preset button memory and quick recall.
Function of KIV-700 with KCA-BT300/BT200 (Optional Accessory) Bluetooth Audio Operation SRC MENU Volume 4 38 ¢ Basic Operation Selecting Bluetooth Audio source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select the “BT AUD EXT” display. ✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source. Connecting a Bluetooth Device Pause and play Press the [38] button.
English | 29
Function of KIV-BT900 KIV-700 with KCA-BT300/BT200 (Optional Accessory) Operation of Hands-Free Phoning SRC MENU Volume DISP ⁄ • When registering from this unit, refer to (page 51). • For details on the Bluetooth cell-phone with the handsfree function, see (page 67). 4 38 ¢ / PLAY MODE Connecting a Bluetooth Device Before using the Bluetooth device, you need to connect Bluetooth device to this unit. The following 3 steps procedure is necessary.
Call Waiting Making a Call Answering Another Incoming Call with the Current Call Suspended Turn the [Volume] knob and press it when the desired item is displayed. Select “Answer”. 1 Enter Bluetooth mode KIV-BT900: Press the [ ] button. KIV-700: Press the [PLAY MODE] button for at least 1 second. 2 Select a dialing method Turn the [Volume] knob and press it when the desired item is displayed.
Function of KIV-BT900 KIV-700 with KCA-BT300/BT200 (Optional Accessory) Operation of Hands-Free Phoning Calling a Number in the Phone Book ⁄ 1 Enter Bluetooth mode KIV-BT900: Press the [ ] button. KIV-700: Press the [PLAY MODE] button for at least 1 second. • The outgoing call list and the incoming call list, and the missed call list are the lists of calls originated from and received at this unit. They are not the ones stored in the cell-phone memory.
Make a Voice Dialing Call 1 Enter voice recognition mode KIV-BT900: Press the [ ] button for at least 1 second. KIV-700: Press the [VOL] button for at least 1 second. 2 “Phonebook Name?” is displayed. When a beep is heard, say the name within 2 seconds. 3 “Phonebook Type?” is displayed. When a beep is heard, say the category name within 2 seconds. 4 Make a call Press the [Volume] knob. ✍✍This step is the same as step 4 of the procedure in (page 32).
Display Settings SRC MENU Volume DISP Display “Settings” “Display & Illumination” “Display Select” “Display Off Mode” Switching display Press the [DISP] button. Artwork large Video*1 Information Clock Display Type Displays song information. (Only for iPod/ USB/ Zune/ Internal Memory source) Displays artwork and song information, etc., separately. (Only for iPod/ USB/ Zune/ Internal Memory source) Displays video of a video file. (Video file only) Displays station information, etc.
Illumination Color Selection Customization of Clock Display Selecting the Illumination Color of the panel. You can customize the display of the Clock Display mode. 1 Enter Menu List mode Press the [MENU] button. 2 Enter Illumination color selection mode Turn the [Volume] knob and press it when the desired item is displayed. Select “Settings” > “Display & Illumination” > “Key Color Select”.
Display Settings Customization of Display You can customize the display of the Artwork small, Artwork large, or Information mode. 1 Select the source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. ✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source. 2 Enter Menu List mode Press the [MENU] button.
In SIRIUS source (Optional) Channel Name (“Channel Name”) Song Title (“Song Title”) Artist name (“Artist Name”) Composer name (“Composer Name”) Category Name (“Category Name”) Auxiliary Input Display Setting Band & Channel Number (“Channel Number”) Date (“Date”) Spectrum analyzer (“Speana”) Blank (“Blank”) Selecting the display when changing to Auxiliary input source. 1 Select the AUX source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed.
Clock and Other Functions SRC MENU Volume Clock and Date Adjustment 5 Select Summer Time Turn the [Volume] knob and press it when the desired item is displayed. Select “Summer Time” > “ON” or “OFF”. 6 Enter Date adjustment mode Turn the [Volume] knob and press it when the desired item is displayed. Select “Date Adjust”. 7 Adjusting Date 1. Turn the [Volume] knob and press it when the desired item is displayed. Select month, day or year. 2.
3 4 Enter Initial Setting mode Turn the [Volume] knob and press it when the desired item is displayed. Select “Initial Settings”. Select the setting item to adjust Turn the [Volume] knob and press it when the desired item is displayed. Display “Initial Settings” “Source Select” Demonstration Mode Setting Turning the demonstration mode ON/OFF. 1 Enter Menu List mode Press the [MENU] button. 2 Enter Demonstration mode setting Turn the [Volume] knob and press it when the desired item is displayed.
Audio Adjustments “2Zone Select” Sets the Dual Zone System. “2Zone Front/Rear” - Dual Zone System (page 43). “Preset” Sets the audio preset. - Audio Preset Recall (page 47). - Audio Preset Memory (page 46). SRC MENU Volume ( 1 Select the source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select a source other than “STANDBY”. ✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source.
Preset Equalizer Curve Select Manual Equalizer Control You can select following Equalizer curve. You can adjust following Equalizer Control items. Display “Natural” “User” “Rock” “Pops” “Easy” “Top40” “Jazz” “Game” “iPod” Equalizer curve Natural User* Rock Pops Easy Top 40 Jazz Game iPod (During iPod source only) * The Equalizer curve set in the section is recalled. 1 Enter Audio Control mode Press the [Volume] knob.
Audio Adjustments Listening Position Selection Listening Position Fine Adjustments The sound environment can be compensated in accordance with the selected position. According to the listening position, select the position from the following settings. Making fine adjustment of the value specified at Preset position selection per speaker. Compensation seat Not compensating. Front-Left seat Front-Right seat Front seat Display “ALL” “FL” “FR” “F ALL” 1 Enter Audio Control mode Press the [Volume] knob.
Dual Zone System The separate sources can be selected for Front channel and Rear channel. • The source set as a sub source cannot be operated during the dual zone mode. Cancel the mode and then operate the source. Display Overview “2Zone Rear Volume”*1 Adjust the volume of Rear channel. “0” — “35” “Detailed Setup” “2Zone Select” The Dual Zone System is enabled by selecting a sub source.
DSP Setup SRC MENU Volume Speaker Setting The speaker X’Over is automatically set when the position and size of each speaker are selected from the following items. Speaker “FRONT” Item “Location” “Size” Car Type Selection You can compensate the delay of the sound arrival time by selecting your environment from the following car types. Display “Off” “Compact” “FullSize Car” “Wagon” “Minivan” “SUV” “Minivan (Long)” “Tweeter” “REAR” Overview Not compensating.
5 Car Type Fine Adjustments Adjusting fine tuning of the speaker position compensation value specified at (page 44). Display “Front” “Rear” “SW” Item Front speaker Rear speaker Subwoofer Exit Audio Control mode Press the [MENU] button for at least 1 second. Range 0 – 14.44 feet 0 – 14.44 feet 0 – 14.44 feet 1 Enter Audio Control mode Press the [Volume] knob. 2 Enter Car Type Adjustment mode Turn the [Volume] knob and press it when the desired item is displayed.
DSP Setup X’Over Setting Audio Preset Memory Fine adjusting the following setting values corresponding to the X’Over values set in the section (page 44). Registering the value setup by Sound Control.
Audio Preset Recall Recalling the sound setup registered by
Favorite Control • If the contents in iPod are changed after the FAVORITE registration, the list registered in this unit becomes different from that in iPod. In this case, perform the FAVORITE registration again. FAV SRC MENU Volume Favorite Preset Recall Retrieving an item registered to Favorite. Favorite Preset Memory Registering the operation procedure to select your favorite broadcast station or iPod Playlists/ Artists, etc.
Favorite Preset Memory Delete Deleting an item registered to Favorite. 1 Select the Standby Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select the “STANDBY” display. ✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source. 2 Enter Menu List mode Press the [MENU] button. 3 Enter Favorite Preset Memory Delete mode Turn the [Volume] knob and press it when the desired item is displayed.
Function of KIV-BT900 KIV-700 with KCA-BT300/BT200 (Optional Accessory) Bluetooth Setup “Bluetooth HF”/ You can specify output speakers for hands-free “Bluetooth HF/ voice communication and Bluetooth audio Audio”*1 sound. “Front”: Outputs voice from the front speakers. “All”: Outputs voice from the front and rear speakers. “Call Beep” You can output a beep from the speaker when a call comes in. “ON”: Beep is heard. “OFF”: Beep is canceled. “BT F/W Update” Display the version of the firmware of this unit.
Registering Bluetooth Device To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to 5 Bluetooth devices to this unit. Registering from this unit 1 Enter Bluetooth mode KIV-BT900: Press the [ ] button. KIV-700: Press the [PLAY MODE] button for at least 1 second. 2 Enter Bluetooth device registration mode Turn the [Volume] knob and press it when the desired item is displayed.
Function of KIV-BT900 KIV-700 with KCA-BT300/BT200 (Optional Accessory) Bluetooth Setup Registering PIN Code By operating the Bluetooth device, specify the PIN code necessary for registering this unit. 1 2 3 4 5 Enter Bluetooth mode KIV-BT900: Press the [ ] button. KIV-700: Press the [PLAY MODE] button for at least 1 second. Enter PIN code edit mode Turn the [Volume] knob and press it when the desired item is displayed. Select “BT Settings” > “Detailed Setup” > “PIN Code Edit”.
Deleting a Registered Bluetooth Device You can delete a registered Bluetooth device. 1 Enter Bluetooth mode KIV-BT900: Press the [ ] button. KIV-700: Press the [PLAY MODE] button for at least 1 second. 2 Enter Bluetooth device deletion mode Turn the [Volume] knob and press it when the desired item is displayed. Select “BT Settings” > “Detailed Setup” > “Device Delete”. “(name)” is displayed. 3 Select the Bluetooth device Turn the [Volume] knob.
Function of KIV-BT900 KIV-700 with KCA-BT300/BT200 (Optional Accessory) Bluetooth Setup Adding a Voice Dialing Command Add a voice tag to the phone book for voice dialing. You can register up to 35 voice tags. 1 2 Enter Bluetooth mode KIV-BT900: Press the [ ] button. KIV-700: Press the [PLAY MODE] button for at least 1 second. Enter Phone book name edit mode Turn the [Volume] knob and press it when the desired item is displayed. Select “BT Settings” > “Voice Tag” > “Phonebook Name Edit”.
Setting a Voice Command for Category Add a voice tag to the phone number category (type) for voice calling. 1 Enter Bluetooth mode KIV-BT900: Press the [ ] button. KIV-700: Press the [PLAY MODE] button for at least 1 second. 2 Enter Phone Number type edit mode Turn the [Volume] knob and press it when the desired item is displayed. Select “BT Settings” > “Voice Tag” > “Phonebook Type Edit”.
Function of KIV-BT900 KIV-700 with KCA-BT300/BT200 (Optional Accessory) SMS (Short Message Service) SRC MENU Volume DISP Display the SMS The SMS arrived at the cell-phone is displayed on the receiver. A newly arrived message is displayed. ¤ / PLAY MODE Downloading the SMS Download the short message (SMS) arrived at the cell-phone so that it can be read on this unit. 1 Enter Bluetooth mode KIV-BT900: Press the [ ] button. KIV-700: Press the [PLAY MODE] button for at least 1 second.
English | 57
Satellite Radio Tuner Control (Optional) SRC MENU Volume Satellite Radio Setting You can select following Satellite Radio Setting items. 4 ¢ 1 2 Select Satellite Radio source 3 Turn the [Volume] knob and press it when the desired item is displayed. Select “Settings”. 4 Select the setting item to adjust Turn the [Volume] knob and press it when the desired item is displayed. Basic Operation Selecting Satellite Radio source Press the [SRC] button.
Cancelling Category and Channel Search mode Press the [MENU] button for at least 1 second, and then press it again briefly. ⁄ • You cannot Channel search until the category information is acquired. Preset Memory Channel Scan Every receivable Channel is checked for 10 seconds. 1 2 Select Satellite Radio source 3 Start Channel Scan Turn the [Volume] knob and press it when the desired item is displayed. Select “Channel Scan”.
HD Radio™ Tuner Control (Optional) SRC MENU Volume SEARCH MODE Station Preset Memory Putting a station in the memory. 4 ¢ Basic Operation Selecting HD Radio source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select the “HD RADIO” display. ✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source. Selecting the Receiving Band 1. Enter Menu List mode Press the [MENU] button. 2.
Preset Tuning HD Radio™ Setting Recalling the stations in the memory. You can select following HD Radio Setting items. 1 2 Select the radio band 1 2 Select the HD Radio source 3 Select a desired station in the memory Turn the [Volume] knob and press it when the desired item is displayed. Select “List & Memory” > Preset number. 3 Turn the [Volume] knob and press it when the desired item is displayed. Select “Settings”.
HD Radio™ Tuner Control (Optional) Function of remote control Function of KTC-HR300 (optional accessory) Direct Access Tuning iTunes Tagging Tuning in a desired radio station by entering the frequency. Using an iTunes Tagging enabled HD Radio receiver you can tag your music. When you hear a song you enjoy on your local HD Radio station, you only have to press the [SEARCH MODE] button. The song’s information will then be saved on this unit.
English | 63
Basic Operations of Remote Control In Tuner/HD Radio source VOL SRC • Band select: [FM+]/[AM–] • Station select: [4]/[¢] • Recall preset stations: [1] — [6] ATT ENT/ 38 5/∞ EXIT AUD AM– FM+ 0—9 DIRECT (page17,23,23,26,32,59,62) General control • Volume control: [VOL] • Source select: [SRC] • Volume reduce: [ATT] When the button is pressed again, the volume returns to the previous level.
Preparing the remote control unit Hands-free phone control Making a call • Enter the dialing method selection mode: [ • Select a dialing method: [ENT] • Number dial input: Input a digit: [0] – [9] Input “+”: [¢] Input “#”: [FM+] Input “*”: [AM–] Clear the entered phone number: [4] • Make a call: [DIRECT] ] Receiving a call • Answer the call: [ ] • Switch between the private talk mode and the hands-free talk mode: [ENT] Call waiting • Answer Another Incoming Call with the Current Call Suspended: [ ] • Ans
Appendix About Audio file • Playable Audio file AAC-LC (.m4a) MP3 (.mp3) WMA (.wma) Linear PCM (WAV) (.wav) • Playable USB device USB mass storage class • Playable USB device file system FAT16, FAT32 Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device. • Playing order of the Audio file In the example of folder/file tree shown below, the files are played in the order from ① to ⑩.
About USB device • When the USB device is connected to this unit, it will be charged from the unit when the unit is turned on. • Install the USB device in the place where it will not prevent you from driving your vehicle properly. • Take backups of the audio files used with this unit. The files can be erased depending on the operating conditions of the USB device. We shall have no compensation for any damage arising out of erasure of the stored data. • No USB device comes with this unit.
Appendix Menu List Common function items Display “Settings” “Clock & Date” “Clock Adjust” “Time Synchronized” “Summer Time” “Sub Clock Adjust” “Date Adjust” “Date Mode” “Display & Illumination” “Display Select” “Type Select” “Side Select” “Text Select” “Graphic Select” “Display Off Mode” “Display Dimmer” “Text Scroll” “Key Color Select” “Key ILLUMI Dimmer” “ILLUMI Effect” “ILLUMI Music SYNC” “Aspect Set” “Monitor Setup” “RDS Setting” “TI” “DEMO Mode” Page – 38 – – 36, 35 36 36, 35 34 35 34 – 24 39 Func
Function items appearing when the USB source is selected Display Page “USB List” 15 “Copy from USB” 18 “Play Mode” 16 “File Scan” “Folder Random” “All Random” “File Repeat” “Folder Repeat” “Port Up” 14 “Drive Select” 14 “Slide” 20 “Save as Wallpaper” 20 “Settings” – “Device F/W Version” 17 “Device F/W Update” “Clock & Date” – “Display & Illumination” – “RDS Setting” – Function items appearing when the Music Editor media source is selected Display Page “Music” 15 “Playlists” “Artists” “Albums” “Songs” “Genre
Appendix Function items appearing when the Disc changer source is selected Display Page “Play Mode” 22 “Track Scan” “Disc Random” “Magazine Random” “Track Repeat” “Disc Repeat” “Settings” – “Clock & Date” – “Display & Illumination” – “RDS Setting” – Function items appearing when the Tuner source is selected Display Page “List & Memory” 25, 25 “FM1” 24 “FM2” “FM3” “AM” “PTY Search” 27 “Settings” – “Seek Mode” 24 “Auto Memory” 25 “TI” 24 “TAG Memory” “Tagging” “Forced MONO” “Clock & Date” – “Display & Illumin
Function items appearing when the Satellite Radio tuner source is selected Display Page “List & Memory” 59, 59 “SR1”/ “XM1” 58 “SR2”/ “XM2” “SR3”/ “XM3” “SR4”/ “XM4” “Channel Search” 58 “Channel Scan” 59 “Settings” – “Seek Mode” 58 “ESN” “Clock & Date” – “Display & Illumination” – “RDS Setting” – Function items appearing when the HD Radio™ tuner source is selected Display Page “List & Memory” 60, 61 “FM1” 60 “FM2” “FM3” “AM” “Settings” – “Seek Mode” 61 “Auto Memory” 60 “Receive Mode:” 61 “TAG Memory” “Taggi
Appendix Time zone list Continent Area City 72 | City Hawaii Alaska Pacific Time Arizona Mountain Time Central Time Eastern time Indiana Atlantic Time Mid-Atlantic W.Central Africa Abu Dhabi Adelaide Amman Amsterdam Anchorage Ankara Athens Atlanta Auckland Baghdad Baku Bangkok Beijing Beirut Berlin Bogotá Brasilia Brussels Bucharest Budapest Buenos Aires Cairo Cape Verde Is.
English | 73
Appendix FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. FCC NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Accessories/ Installation Procedure Accessories 1 5 • ..........1 2 ..........4 6 • ..........2 ..........4 • 7* 3 2 m ..........1 3 m ..........1 * KIV-BT900 only 4 2.5 m ..........1 Installation Procedure 1 To prevent a short circuit, remove the key from the 2 3 4 5 6 7 8 • ignition and disconnect the - battery. Make the proper input and output wire connections for each unit. Connect the speaker wires of the wiring harness.
Connecting Wires to Terminals USB device (commercially available) For the sake of safety, be sure to connect the parking sensor. Connect to the vehicle’s parking brake detection switch harness. not remove the cap when you do not use ⁄ Do the USB cable. The connector will cause the ⁄ unit to malfunction if it gets in touch with any metallic part of the vehicle.
Installation/Removing the Unit Non-Japanese Cars Removing the Hard Rubber Frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level. Lift up and pull the frame forward as shown in the figure. Lock Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Accessory2 Removal tool ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
Installation/Removing the Unit Accessory of KIV-BT900 Installation the Microphone Unit 1 Check the installation position of the microphone 2 3 4 (accessory 7). Remove oil and other dirt from the installation surface. Install the microphone. Wire the microphone cable up to the hands-free box with it secured at several positions using tape or the like. Accessory 7 Fix a cable with a commercial item of tape. Peel the release coated paper of double-face adhesive tape to fix on the place shown above.
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! ! ! • Cannot set up the subwoofer. • No output from the subwoofer. • Cannot set up the subwoofer position of Manual position setting. ▲ • The Dual zone function is enabled. (page 43) • In the speaker select option, None is selected for the subwoofer. (page 44) • Cannot set up the equalizer. • Cannot set up the Bass Boost.
Troubleshooting Guide Hands-free ? The hands-free talk volume is low. The hands-free talk volume is set at a low level. The hands-free talk volume can be adjusted independently. Adjust it during hands-free talk. “Mic Gain” and “Noise Reduction” (page 50). ? No sound is heard from the rear speakers. You are talking in the hand-free talk mode. No sound is heard from the rear speakers in the hands-free talk mode. ? No beep is heard at reception of an incoming call.
USB ERROR: iPod Error: Some trouble may have occurred to the connected USB device. Remove the USB device, then cycle the power switch to ON. If the same display is repeated, use another USB device. No Entry: Connection to the iPod has failed. Remove the USB device and then reconnect it. Confirm that the software for the iPod is the latest version. HF Error 07: The memory cannot be accessed. Turn off the power and on again.
Specifications FM tuner section Frequency Range (200 kHz Space) : 87.9 MHz – 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 μV/75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.
Audio/ Video section Maximum output power : 50 W x 4 Full Bandwidth Power (at less than 1% THD) : 22 W x 4 Speaker Impedance : 4 – 8 Ω Tone action BAND1 (62.5 Hz): ±9 dB BAND2 (250 Hz): ±9 dB BAND3 (1 kHz): ±9 dB BAND4 (4 kHz): ±9 dB BAND5 (16 kHz): ±9 dB Preout level / Load (CD/CD-CH) : 4000 mV/10 kΩ Preout impedance : ≤ 600 Ω iPod terminal Video output level : 1 Vp-p (75 Ω) Audio output level : 1.
This symbol mark indicates that Kenwood manufactured this product so as to decrease harmful influence on the environment.