Owner's Manual
Table Of Contents
- Instruction Manual
- Quick Start Guide
- Contents
- About the Quick start guide
- How to read this manual
- Precautions
- Initial Settings
- Adjusting the volume
- Functions of the Buttons on the Front Panel
- Turning on the Unit
- Source control screen descriptions
- Playing a disc (DDX6906S/ DDX6706S/ DDX5706S)
- Connecting a USB device
- Connect iPod/iPhone
- DVD/ VCD Basic Operation (DDX6906S/ DDX6706S/ DDX5706S)
- Radio Basic Operation.
- Music CD/ Disc media/USB Basic Operation
- iPod/iPhone Basic Operation
- Bluetooth Setup
- Using the Hands-Free Unit
- Before Installation
- Installing the unit
- About this Unit
Controlling Audio
71English
Controlling Audio
You can adjust various settings such as audio
balance or subwoofer level.
1
Press the [ ]/[MENU] button.
Popup menu appears.
2
Touch [Audio].
See the following section for each
setting.
• Set up speaker / X’over (P.72)
• Controlling equalizer/ subwoofer level
(P.74)
• Set listening position / DTA (P.77)
• Controlling general audio (Fader /
Balance) (P.73)
• Set volume offset (P.75)
• Performing zone control (P.75)
• Set sound effect (P.76)
• Memory/recall the audio settings
(P.78)
3-way speaker system setup
(DDX6906S/ DMX706S)
Select the appropriate crossover network
mode for the speaker system used (2-way or
3-way speaker system).
1
Press the [ ]/[HOME] button.
HOME screen appears.
2
Touch [ ].
Source selection screen appears.
3
Touch [STANDBY].
4
Press the button 1 followed by the
button 2 for 1 second at the same time.
DDX6906S
2
1
DMX706S
1 2
Speaker system select screen appears.
5
Select the crossover network mode.
A confirmation screen appears.
6
Touch [Ye s ].
NOTE
• When the 3-way speaker system is selected, the
following functions are disabled.
– Front focus of Listening Position / DTA
– Fader for Controlling General Audio
– Zone Control
– Selection of the speakers to output sound from
the cell-phone of Bluetooth HF/Audio
– Beep for User Interface Setup
• Connecting 3-way speakers with the 2-way mode
selected can break the speakers.