Quick Start Guide

English ñ 23

Ñ Unit

1) To prevent a short circuit, remove the key from

the ignition and disconnect the ¤ terminal of

the battery.

2) Make the proper input and output wire

connections for each unit.

3) Connect the wire on the wiring harness.

4) Take Connector B on the wiring harness and

connect it to the speaker connector in your

vehicle.

5) Take Connector A on the wiring harness and

connect it to the external power connector on

your vehicle.

6) Connect the wiring harness connector to the

unit.

7) Install the unit in your car.

8) Reconnect the ¤ terminal of the battery.

9) Press the <Reset> button. (P.4)

10) Perform the Initial Setup.

See First Step (P.7).

Bend the tabs of the

mounting sleeve with

a screwdriver or similar

utensil and attach it in

place.

✎ NOTE

• Make sure that the unit is installed securely in place.

If the unit is unstable, it may malfunction (eg, the

sound may skip).

Ñ Attaching the front panel

Hold the front panel securely so as not to drop it

accidentally. Fit the panel onto the attaching plate

until it is rmly locked.

Ñ Trim plate

1) Attach accessory 5 to the unit.