Owner's Manual

Connection/Installation
109English
5) Connect the wiring harness connector to the
unit.
6) Install the unit in your car.
7) Reconnect the ¤ terminal of the battery.
8) Perform the Initial Setup.
See Initial setup (P.10).
Installing the unit
Ñ Non-Japanese cars
Bend the tabs of the
mounting sleeve
with a screwdriver
or similar utensil and
attach it in place.
Ñ Japanese cars
6 or 7
6 or 7
Car Bracket
NOTE
• Make sure that the unit is installed securely in
place. If the unit is unstable, it may malfunction
(eg, the sound may skip).
Ñ Trim plate
1) Attach accessory 8 to the unit.
DNX996XR / DNR876S
8
DNX696S / DNX576S / DNR46EX /
DNR476S
A
B
8
B : Narrow
A : Wide
● General Motors cars (DNX996XR)
1) Cut out accessory - to meet the shape of the
opening of the center console.
2) Attach accessory - to the unit.
-
Cut out to meet the shape
of the opening in the
vehicle.
● Toyota/Scion cars (DNX996XR)
1) Cut out accessory - as illustrated.
Cutting line
-
2) Fold double-sided adhesive (accessory =)
along the slit and attach it to accessory -
cut-out against the center rib as illustrated.
Use 2 pieces of accessory = for 1 accessory
- cut-out.
3) Attach accessory - cut-out to the unit.
=