Instruction Manual
1616
Return to the Top page
Basic Operations
USB device
Connect the USB device with the
USB cable.
The unit reads the device and playback
starts.
● To disconnect the device:
Touch screen from the left end to display
the function panel.
Touch [ G ]. Disconnect the device from
the cable.
iPod
Connect the iPod.
Press the <HOME> button.
Touch [iPod] in the HOME screen.
(P.19)
NOTE
• For the details of the necessary cable and adapter
to connect with iPod/iPhone, refer to Music/
Video/Picture Basic Operation (P.36).
● To disconnect the iPod/iPhone
connected with the cable:
Touch screen from the left end to display
the function panel.
Touch [ G ]. Disconnect the iPod/ iPhone
from the cable.
SD card
DNX7150DAB/ DNX715WDAB
Press the <0> button for 1 second
to open the front panel.
0
NOTE
• For details, see Functions of the Buttons on the
Front Panel (P.6).
Insert the card into the slot until
it clicks.
The unit loads the card and playback starts.
DNX4150DAB/ DNX4150BT
● To remove:
Push the SD card until it clicks and then
remove your finger from the card. The card
pops up so that you can pull it out with
your fingers.
NOTE
• A dummy micro SD card is inserted as the slot
cover. Remove it before using and keep it in an
appropriate place.
1
1
2
3
1
2