Instruction Manual

3636
Return to the Top page
CD/Audio and Visual Files/iPod/App Operation
Music/Video/Picture Basic Operation
Most functions can be controlled from the source control screen and playback screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
mode (P.107).
• To connect the Android device with this unit, the cable (sold separately) and the profile which your Android
device supports are necessary as follows:
• To listen to music and watch video of APPS source
−MHL device
−KCA-MH100
−Bluetooth profile: SPP
• To listen to music of APPS source
−Bluetooth profile: A2DP
−Bluetooth profile: SPP
• To listen to music of Bluetooth Audio source
−Bluetooth profile: A2DP
−Bluetooth profile: AVRCP
• To connect the iPod/iPhone with this unit, the cable, adapter (both sold separately), and the profile which your
iPod/iPhone supports are necessary as follows:
• To listen music and watch video with Lightning connector device
−Lightning Digital AV Adapter
−KCA-HD100
−KCA-iP103
−Bluetooth profile: SPP
• To listen music with Lightning connector device
−KCA-iP103
• To listen music and watch video with 30-pin connector device
−KCA-iP202
• To listen music with 30-pin connector device
−KCA-iP102
• To listen to music via Bluetooth
−Bluetooth profile: A2DP
−Bluetooth profile: SPP
When connecting with Lightning Digital AV Adapter some applications can be controlled from this unit. The
operable functions depend on the application.
• Do not leave the cable or the adapter made by other makers inside the car. It might lead the malfunction caused
by heat.
• Some settings are necessary to meet the connected iPod/iPhone or Android device. Refer to
iPod/iPhone
connection setup (P.54) and Application link setup (P.56).
See the following sections for each source operation.
• Music CD (P.37)
• Disc media (P.37)
• USB device (P.39)
• SD Card (P.39)
• iPod (P.39)
• Aha (P.46)
• AUPEO! (P.49)
• Apps (P.51)
CD/Audio and Visual Files/iPod/App Operation