Instruction Manual

9090
Return to the Top page
Setting Up
Camera Setup
You can set camera parameters.
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Camera].
Camera SETUP screen appears.
4 Set each item as follows.
Rear Camera*
1
Selects the type of rear camera to use.
CMOS-3xx: When the CMOS-300 series with ID
1 set is connected.
Other (Default): When the other camera is
connected.
R-CAM Interruption
Sets a method for switching the display.
Setting values are ON and OFF.
ON: Switches to the rear view camera video
display when shifting to reverse or pressing
the <MENU> (
)/ <TEL> ( )
button for 1 second*.
OFF (Default): Switches to the rear view
camera video display when pressing the
<MENU> (
)/ <TEL> ( ) button
for 1 second*
R-CAM Settings*
2
Adjusts the CMOS-300 series with ID 1 set.
For details, see the instruction manual of your
camera.
Parking Guidelines*
4
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is “ON”.
Guidelines Setup*
4
Adjust the parking guidelines. See Adjusting
the parking guidelines (P.91).
*1 These settings become settable only when
the parking brake is on.
*2 This setting becomes settable only when
the parking brake is on and the CMOS-300
series is selected.
*3 [TEL Key Longer than 1 Second] or [MENU
Key Longer than 1 Second] must be set
to “R-CAM”/ “CAM”. See User interface
(P.82)
*4 This setting becomes settable only when
the “Rear Camera” is set to [Other].