Instruction Manual

7272 73
Return to the Top page
Setting Up
Return to the Top page
Setting Up
Security setup
operation
Youcansetupasecuritycodetoprotect
yourreceiversystemagainsttheft.
NOTE
• WhentheSecurityCodefunctionisactivated,the
codecannotbechangedandthefunctioncannot
bereleased.NotetheSecurityCodecanbesetas
the4digitnumberofyourchoice.
1
Touch [Security] in the System Menu
screen.
Security screen appears.
2
Touch [ON] of [SI].
NOTE
• If“SI”isturnedon,theSIindicatoronthesub
panelflasheswhenthevehicleignitionisoffand
thepanelisdetached.Defaultis“ON”.
3
Touch [SET] of [Security Code Set].
NOTE
• Ifyouhavealreadycompletedthecode
registration,[CLR]isdisplayed.
4
Enter a security code with four-digit
number and touch [Enter].
5
Enter the same code again and touch
[Enter].
Security code is registered.
NOTE
• Ifyouenteradifferentsecuritycode,thescreen
returnstostep4(forthefirstcodeentry).
• Ifyouhavepressed<Reset>buttonorifyou
havedisconnectedtheReceiverfrombattery,
enterthecorrectsecuritycodeasthatyouhave
enteredinstep4andtouch[Enter].Youcanuse
yourReceiver.
operation
Aredindicatorwillblinkontheunitafterthe
ACCissettoOFF,warningpotentialthieves.
Ifturnedto“ON”(default),thesecurity
indicatoronthefrontpanelflasheswhenthe
vehicleignitionisoff.
1
Touch [Security] in the System Menu
screen.
Security screen appears.
2
Touch [ON] or [OFF] of [SI].
EXT SW setup
Setuptheexternalswitchpowermode.
1
Touch [EXT SW] in the System Menu
screen.
EXT SW screen appears.
2
Set each item as follows.
SW Name
Setsthenameoftheexternaldevice.
Output Pattern
Setsthepowersignaloutputmodeamong
“Pulse”/“Level”.Defaultis“Pulse”.
Youcansettoturnoutputon/offeachtime
thebuttonontheEXTSWscreenistouched.
SeeExternal Device Control (P.80).
Pulse Set
Setsthepulsesignaloutputtime.
Outputs500mswhen“1”isset.
Increasesby200mswitheachstep.Upto100
stepscanbeset.
NOTE
• Youcanentercharactersonlyafteryouhave
appliedtheparkingbrake.
• “Pulse”:Generatesasinglepowersignalpulse.
• “Level”:Continuesoutputofhighpowersignal.
Setup memory
AudioControl,AV-INSETUP,Camera,and
AudioSETUPsettingscanbememorized.The
memorizedsettingscanberecalledatany
time.Forexample,evenwhenthesettings
areclearedduetoreplacementofthe
battery,thesettingscanberestored.
1
Touch [SETUP Memory] in the System
Menu screen.
SETUP Memory screen appears.
2
Follow the instruction on the screen.
[Lock]/[Unlock]*
LocksorunlockstheAV-INSETUP,andAudio
SETUPsettings.
Yes
Memorizesorrecallsthesettings.
No
Cancelsthefunctionormemorization.
TheSETUPMenuscreenappearsagain.
*When[Lock]isselected,youcannotchange
theAV-INSETUP,andAudioSETUPsettings.
Also,thelockedkeymarkisdisplayed
undereachsettingiconinthesetupmenu.
Continued