DNX450TR GPS NAVIGATION SYSTEM Quick Start Guide You can update the system by connecting a USB device containing an update file. For updating the system, visit .
Contents About the Quick start guide.................................. 2 Precautions.................................................................. 3 Safety Precautions and Important Information............................................................... 5 About the Quick start guide This Quick Start Guide describes basic functions of this unit. For functions not described in this Guide, refer to the Instruction Manual on the following website: http://manual.kenwood.com/edition/im385/ First Step....
Precautions #WARNING ÑÑTo prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. • If you experience problems during installation, consult your Kenwood dealer.
ÑÑAcquiring GPS signal The first time you turn on this unit, you must wait while the system acquires satellite signals for the first time. This process could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall buildings and trees for fastest acquisition. After the system acquires satellites for the first time, it will acquire satellites quickly each time thereafter. ÑÑHow to reset your unit If the unit fails to operate properly, press the Reset button.
Safety Precautions and Important Information Read this information carefully before starting to operate the Kenwood Car Navigation System and follow the instructions in this manual. Neither Kenwood nor Garmin shall be liable for problems or accidents resulting from failure to observe the instructions in this manual. #WARNING Failure to avoid the following potentially hazardous situations could result in an accident or collision resulting in death or serious injury.
First Step Various setup screens appear automatically before using. ÑÑInitial setup When you first turn on the unit, the screen of the configuration setting will appear. 1 Turn the ignition key of your car to ACC. The unit is turned on. Initial SETUP screen appears. 2 Touch the corresponding key and set the value. Locale Select the country for the navigation system. The language, the distance unit, and the gasoline unit are set.
ÑÑiPod/iPhone connection setup When you first select iPod as a source, the setting screen of the iPod/iPhone connection will appear. 1 Touch [Menu] on any screen. Top Menu screen appears. 2 Touch [iPod] in the Top Menu screen. iPod connection setup screen appears. 3 Touch [CHANGE]. Select the way of iPod/iPhone connection. For the details, refer to ”iPod/iPhone connection setup” (P.51) in the Instruction Manual.
Functions of the Buttons on the Front Panel 3 2 1 4 5 6 7 8 No. Name/Motion 1 Disc insert slot • A slot to insert a disc media. 2 G (Eject) • Ejects the disc. • Pressing for 1 second ejects the disc forcibly. 3 s (Reset) • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.107).
Common Operations ÑÑGeneral ÑÑList screen There are some common function keys in the list screens of most sources. There are some functions which can be operated from most screens. (Scroll) Scrolls the displayed text. [Menu] Returns to the Top Menu screen. Touching for at least 1 second displays the Screen Control screen. (Even when an image is displayed, touching for at least 1 second displays the Screen Control screen.) [6] (RETURN) Returns to previous screen.
How to Use the Navigation System 1 Press the
✎✎NOTE • Touch and drag the map to view a different area of the map. • A speed limit icon could appear as you travel on major roadways. Adding a stop 1) While navigating a route, touch [ ] and then touch [Where To?]. 2) Search for the extra stop. 3) Touch [Go!]. 4) Touch [Add to Active Route] to add this stop before your final destination. Taking a detour 1) While navigating a route, touch [ 2) Touch [ ]. ]. 2) Select [Update]. 3) Follow the on-screen instructions.
How to Play Music You can play audio files from music CD, disc media, USB storage device, SD Card, and iPod. ✎✎NOTE • For details on playable file format, media format, iPod model, etc., refer to the Instruction Manual. 1 Connect the media you want to play as shown below. To disconnect the USB device: 1) Touch [ G ] on the screen and disconnect the device from the cable. 2 Control the music you are listening to on the source control screen. The following symbols indicate the keys on the screen.
3 Search the track/file you want to listen to. List search 1) Touch center of the screen. The content list of the media being played is displayed. If the information of the current track only ] to switch the list is displayed, touch [ display. How to Play Movie/Picture You can play DVD video, Video CD (VCD), movie files from disc media, iPod and picture files from SD Card , USB storage device. ✎✎NOTE • For details on playable file format, device format, etc., refer to the Instruction Manual.
✎✎NOTE • For operations on the source control screen, see How to Play Music (P.12). However, searching by category/link/album artwork is not available. ] (displayed by touching [ ] in • Touching [ the source control screen) hides all keys. How to Listen to the DAB/ Radio 1 Touch [Menu] on any screen. Top Menu screen appears. 2 Touch [DAB] or [TUNER]. The unit switches to the radio source. 3 Operate on the source control screen. Station search for DAB 1) Touch [ ]. Sub function menu appears.
5) Select your cell-phone from the displayed list in the Searched Device List screen. Call using call records ] (incoming calls), [ ] (missed 1) Touch [ ] (outgoing calls). calls), or [ 2) Select the phone number from the list. ]. 3) Touch [ Call using the phonebook 6) Enter PIN code form the cell-phone. Registering is completed. The PIN code is set to “0000” as default. 2 Connect your cell-phone to the unit. 1) Touch the device name you want to connect in the Bluetooth SETUP screen.
Installation ÑÑBefore Installation Before installation of this unit, please note the following precautions. #WARNINGS • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. • Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow). The power supply must be connected to the wires via the fuse.
ÑÑSupplied accessories First of all, make sure that all accessories are supplied with the unit. 1 2 (2 m) x1 3 x1 Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. 4 (3 m) x2 5 x1 ÑÑTrim plate 1) Attach accessory 5 to the unit. 6 (5 m) x1 x1 7 x1 ÑÑUnit 5 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤ terminal of the battery. 2) Make the proper input and output wire connections for each unit.
ÑÑGPS antenna GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals. To mount the GPS antenna inside your vehicle: 1) Clean your dashboard or other surface. 2) Remove the separator of the metal plate (accessory 7). 3) Press the metal plate (accessory 7) down firmly on your dashboard or other mounting surface. You can bend the metal plate (accessory 7) to conform to a curved surface, if necessary.
ÑÑRemoving the trim plate 1) Engage the catch pins on the extraction key (accessory 3) and remove the two locks on the lower level. Lower the trim plate (accessory 5) and pull it forward as shown in the figure. ÑÑRemoving the unit 1) Remove the trim plate by referring to step 1 in “Removing the trim plate”. 2) Insert the two extraction key (accessory 3) deeply into the slots on each side, as shown.
ÑÑWiring harness (Accessory 1) connector function guide Pin Numbers for ISO Connectors External Power Connector A-4 A-5 A-6 A-7 A-8 Speaker Connector B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 Cable Color Functions Yellow Blue/White Orange/White Red Black Battery Power Control Dimmer Ignition (ACC) Earth (Ground) Connection Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black Rear Right (+) Rear Right (–) Front Right (+) Front Right (–) Front Left (+) Front Left (–) Rear Left (+) Rear Left (–)
ÑÑSystem connection Accessory 4 Accessory 6 2 1 3 AV Audio output Accessory 2 Connect to the vehicle’s parking brake detection switch harness. Light Green (Parking sensor wire) PRK SW For best safety, be sure to connect the parking sensor. Purple/White (Reverse sensor wire) REVERSE 1 Connect to vehicle’s reverse lamp harness when using the optional rear view camera.
ÑÑConnecting wires to terminals DAB antenna CX-DAB1 (Optional accessory) Fuse (10A) Use of a CX-DAB1(optional accessory) as a DAB antenna is recommended. When using a commercially available DAB antenna, the diameter of the SMB connector must be Φ6.5 mm or less. Φ 6.
ÑÑOptional accessory connection KCA-MH100 (1.8 m)[3] KCA-HD100 (1.8 m)[3] Android smartphone[2] 1 2 3 4 iPod/ iPhone[2] 6 Video Output Rear view camera with microphone[2] 5 Audio Input (red,white) Audio Output USB terminal[1] (0.8 m) CA-C3AV (1.5m)[3] iPod[3] 2 Rear View Camera Input (Audio)/ AV-IN (CA-C3AV; Optional Accessory) input (RCAM/ AV-IN switchable) Video Output (1.8m) Left Right Ground Video USB terminal (0.
About this Unit ÑÑCopyrights • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. • The “AAC” logo is a trademark of Dolby Laboratories.
• libFLAC Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2 007,2008,2009 Josh Coalson Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
ÑÑConnectable iPod/iPhone The following models can be connected to this unit.
Declaration of Conformity with regard to the EMC Directive 2004/108/EC Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer: JVC KENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPAN EU Representative’s: JVCKENWOOD NEDERLAND B.V.
