Owner's Manual

ManualsBrandsKenwood ManualsCar Audio & VideoDNX5180

Table Of Contents

Quick Start Guide

I.

~I::'~II

the microphone

as

far

as

po,

ssible

from the cell-phone.

.

'-,----,

Removing Procedure

Removing

the

hard rubber

frame (escutcheon)

1) Engage the catch pins on the

removal

tool

(accessory(1)) and

remove the

two

locks on the

lower level.

Lower

the

frame and pull

it

forward

as

shown in

the

figure.

NOTE

• The frame

can

be removed from the

top

side

in

the same manner.

2)

When

the

lower level

is

removed,

remove

the

upper

two

locations.

-26-

Removing

the

unit

1) Remove

the

hard rubber frame by

referring

to

step

1

in

"Removing

the hardrubberframe".

2)

Insert the

two

removal tools

(accessory@))

deeply into the slots

on

each side,

as

shown.

3)

Lower

the

removal tool toward

the

bottom,

and pull

out

the

unit

halfway while pressing towards

the

inside.

r-

I

'

,~_.~-_._-._---,----'

--'------""_·--'·-1

NOTE I

I

.

Be

careful

to

avoid injury from the catch I

pins on

the

removal tool. I

l ,

4)

Pull

the

unit

all

the

way

out

with

your hands, being careful

not

to

drop

it.