Owner's Manual

DNX7180/DNX7480BT/DNX6980/DNX6180/DNX6040EX/DNX6480BTIDNX5180
About This Unit
• Copyrights
• The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Kenwood Corporation is under license. Other
trademarks and trade names are those of their
respective
owners.
• The "AAC logo is atrademark of Dolby Laboratories.
• "Made for iPod" and "Made for iPhone" mean that an
electronic accessory has been designed to connect
specifically to
iPod or iPhone, respectively, and has
been certified by the developer to meet Apple
performance
standards. Apple is not responsible for
the operation
of this device or its compliance with
safety and regulatory standards. Please note that the
use ofthis accessory with iPod, iPhone, or iPad may
affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch
are trademarks of Apple Inc., registered in the U.s. and
other countries.
• ~iS atrademark of DVD Format/Logo
Licensing Corporation registered in the U.S., Japan and
other countries.
• This item incorporates copy protection technology
that
is protected by U.s. patents and other intellectual
property rights
of Rovi Corporation. Reverse
engineering and disassembly are prohibited.
•
Ready to receive HD Radio'" broadcasts when
connected to the
KTC-HR300/ KTC-HR200, sold
separately.
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
• Manufactured under license under u.s. Patent #'s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 &
other U.S. and worldwide patents issued &pending.
DTS and the Symbol are registered trademarks & DT5
2.0 Channel and the DTS logos are trademarks of DTS,
Inc. Product includes software. © DTS, Inc. All Rights
Reserved.
· ABOUT DIVX VIDEO:
DivX· is adigital video format created by DivX, Inc.
This is an official DivX Certified· device that plays
DivX video. Visit divx.com for more information and
software tools to convert your files into DivX video.
· ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified· device must be registered in order
to
play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go
to vod.divx.com for more information on how to
complete your registration.
• DivX·,
DivX Certified· and associated logos are
trademarks of DivX, Inc. and are used under license.
-31-
DNX7180/DNX6980/DNX6180/DNX6040EXI
DNX5180:
.A.CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
In compliance with Federal Regulations, following
are reproductions of labels on, or inside the product
relating to
laser product safety.
Kenwood Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI
TOKYO, JAPAN
KENWOOD CORP. CERTIFIES THIS
EQUIPMENT CONFORMS TO DHHS
REGULATIONS NO.21 CFR 1040. 10,
CHAPTER 1, SUBCHAPTER J.
Location: Top plate
• FCC WARNING
This equipment may generate or use radio
frequency
energy. Changes or modifications to this
equipment
may cause harmful interference unless
the modifications are expressly approved in the
instruction
manual. The user could lose the authority to
operate this equipment if
an unauthorized change or
modification
is made.
NOTE
This equipment has been tested and found to comply
with the limits for a
Class Bdigital device, pursuant
to
Part 15 of the FCC Rules. These limits are designed
to provide
reasonable protection against harmful
interference
in a residential installation.
This equipment may cause harmful interference to
radio communications, if it is not installed and used in
accordance with the instructions. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment
does cause harmful
interference to radio or television reception, which
can
be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that
to which the receiver is connected.
• Consult the dealer or
an experienced radiolTV
technician for
help.